From 426478cfe1b83effc57dd3ff56d12f0d4f981b13 Mon Sep 17 00:00:00 2001 From: ballen4705 <ballen4705@4ea69e1a-61f1-4043-bf83-b5c94c648137> Date: Mon, 30 Dec 2002 05:01:07 +0000 Subject: [PATCH] Added example disk git-svn-id: https://smartmontools.svn.sourceforge.net/svnroot/smartmontools/trunk@388 4ea69e1a-61f1-4043-bf83-b5c94c648137 --- www/examples/MAXTOR-6.txt | 156 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 156 insertions(+) create mode 100644 www/examples/MAXTOR-6.txt diff --git a/www/examples/MAXTOR-6.txt b/www/examples/MAXTOR-6.txt new file mode 100644 index 000000000..fe37f6541 --- /dev/null +++ b/www/examples/MAXTOR-6.txt @@ -0,0 +1,156 @@ +# /usr/sbin/smartctl -a -m /dev/hda +smartctl version 5.0-49 Copyright (C) 2002 Bruce Allen +Home page is http://smartmontools.sourceforge.net/ + +=== START OF INFORMATION SECTION === +Device Model: Maxtor 4R080J0 +Serial Number: R20BZ3LE +Firmware Version: RAMB1TU0 +ATA Version is: 7 +ATA Standard is: Unrecognized. Minor revision code: 0x1e +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Off-line data collection status: (0x82) Offline data collection activity + completed without error. +Self-test execution status: ( 33) The self-test routine was interrupted + by the host with a hard or soft reset. +Total time to complete off-line +data collection: ( 241) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Automatic timer ON/OFF support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: ( 41) minutes. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE WHEN_FAILED RAW_VALUE + 3 Spin_Up_Time 0x0027 252 252 063 Pre-fail - 1621 + 4 Start_Stop_Count 0x0032 253 253 000 Old_age - 18 + 5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail - 0 + 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail - 0 + 7 Seek_Error_Rate 0x000a 253 252 000 Old_age - 0 + 8 Seek_Time_Performance 0x0027 252 244 187 Pre-fail - 41642 + 9 Power_On_Hours 0x0032 253 253 000 Old_age - 27 h + 13 m + 10 Spin_Retry_Count 0x002b 252 252 157 Pre-fail - 0 + 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail - 0 + 12 Power_Cycle_Count 0x0032 253 253 000 Old_age - 24 +192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age - 0 +193 Load_Cycle_Count 0x0032 253 253 000 Old_age - 0 +194 Temperature_Celsius 0x0032 253 253 000 Old_age - 29 +195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age - 31004 +196 Reallocated_Event_Count 0x0008 253 253 000 Old_age - 0 +197 Current_Pending_Sector 0x0008 253 253 000 Old_age - 0 +198 Offline_Uncorrectable 0x0008 253 253 000 Old_age - 0 +199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age - 0 +200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age - 0 +201 Unknown_Attribute 0x000a 253 252 000 Old_age - 3 +202 Unknown_Attribute 0x000a 253 252 000 Old_age - 0 +203 Unknown_Attribute 0x000b 253 252 180 Pre-fail - 2 +204 Unknown_Attribute 0x000a 253 252 000 Old_age - 0 +205 Unknown_Attribute 0x000a 253 252 000 Old_age - 0 +207 Unknown_Attribute 0x002a 252 252 000 Old_age - 0 +208 Unknown_Attribute 0x002a 252 252 000 Old_age - 0 +209 Unknown_Attribute 0x0024 079 063 000 Old_age - 0 + 99 Unknown_Attribute 0x0004 253 253 000 Old_age - 0 +100 Unknown_Attribute 0x0004 253 253 000 Old_age - 0 +101 Unknown_Attribute 0x0004 253 253 000 Old_age - 0 + +SMART Error Log Version: 1 +ATA Error Count: 5 + DCR = Device Control Register + FR = Features Register + SC = Sector Count Register + SN = Sector Number Register + CL = Cylinder Low Register + CH = Cylinder High Register + D/H = Device/Head Register + CR = Content written to Command Register + ER = Error register + STA = Status register +Timestamp is seconds since the previous disk power-on. +Note: timestamp "wraps" after 2^32 msec = 49.710 days. + +Error 5 occurred at disk power-on lifetime: 4 hours +When the command that caused the error occurred, the device was in an unknown state. +After command completion occurred, registers were: +ER:04 SC:00 SN:00 CL:f4 CH:2c D/H:00 ST:01 +Sequence of commands leading to the command that caused the error were: +DCR FR SC SN CL CH D/H CR Timestamp + 0e d4 00 82 4f c2 f0 b0 8907.296 + 08 d4 00 82 4f c2 f0 b0 6260.832 + 08 d1 01 01 4f c2 f0 b0 6260.800 + 08 d0 01 00 4f c2 f0 b0 6260.768 + 08 da 00 00 4f c2 10 b0 6260.736 + +Error 4 occurred at disk power-on lifetime: 1 hours +When the command that caused the error occurred, the device was in an unknown state. +After command completion occurred, registers were: +ER:04 SC:00 SN:00 CL:f4 CH:2c D/H:00 ST:01 +Sequence of commands leading to the command that caused the error were: +DCR FR SC SN CL CH D/H CR Timestamp + 0e d4 00 82 4f c2 f0 b0 1944.192 + 08 d4 00 82 4f c2 f0 b0 1824.240 + 08 d1 01 01 4f c2 f0 b0 1824.224 + 08 d0 01 00 4f c2 f0 b0 1824.160 + 08 00 08 3f 00 00 f0 ca 1810.400 + +Error 3 occurred at disk power-on lifetime: 1 hours +When the command that caused the error occurred, the device was in an unknown state. +After command completion occurred, registers were: +ER:04 SC:00 SN:00 CL:f4 CH:2c D/H:00 ST:01 +Sequence of commands leading to the command that caused the error were: +DCR FR SC SN CL CH D/H CR Timestamp + 0e d4 00 82 4f c2 f0 b0 1456.432 + 08 d4 00 82 4f c2 f0 b0 1379.456 + 08 d1 01 01 4f c2 f0 b0 1379.440 + 08 d0 01 00 4f c2 f0 b0 1379.376 + 08 00 08 f7 01 54 f0 ca 1378.544 + +Error 2 occurred at disk power-on lifetime: 0 hours +When the command that caused the error occurred, the device was in an unknown state. +After command completion occurred, registers were: +ER:04 SC:00 SN:00 CL:f4 CH:2c D/H:00 ST:51 +Sequence of commands leading to the command that caused the error were: +DCR FR SC SN CL CH D/H CR Timestamp + 08 d4 00 82 4f c2 f0 b0 908.320 + 08 d1 01 01 4f c2 f0 b0 908.320 + 08 d0 01 00 4f c2 f0 b0 908.272 + 08 d4 00 7f 4f c2 f0 b0 905.696 + 08 d1 01 01 4f c2 f0 b0 905.664 + +Error 1 occurred at disk power-on lifetime: 0 hours +When the command that caused the error occurred, the device was in an unknown state. +After command completion occurred, registers were: +ER:04 SC:50 SN:40 CL:97 CH:03 D/H:10 ST:51 +Sequence of commands leading to the command that caused the error were: +DCR FR SC SN CL CH D/H CR Timestamp + 00 fe 00 00 00 00 10 ef 137.184 + 00 3d 00 00 00 00 10 c3 137.136 + 00 e4 00 00 00 00 10 c3 137.088 + 00 3d 00 00 00 00 10 c3 137.088 + 00 00 00 00 5e 20 10 70 137.040 + +SMART Self-test log, version number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended captive Interrupted (host reset) 10% 4 +# 2 Short off-line Completed 00% 2 +# 3 Short captive Completed 00% 2 +# 4 Extended captive Interrupted (host reset) 40% 1 +# 5 Extended captive Interrupted (host reset) 70% 1 +# 6 Extended captive Interrupted (host reset) 40% 0 -- GitLab