/*
* ataprint.c
*
* Home page of code is: http://smartmontools.sourceforge.net
*
* Copyright (C) 2002-4 Bruce Allen <smartmontools-support@lists.sourceforge.net>
* Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* You should have received a copy of the GNU General Public License
* (for example COPYING); if not, write to the Free
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* This code was originally developed as a Senior Thesis by Michael Cornwell
* at the Concurrent Systems Laboratory (now part of the Storage Systems
* Research Center), Jack Baskin School of Engineering, University of
* California, Santa Cruz. http://ssrc.soe.ucsc.edu/
*
*/
#include <ctype.h>
#include <stdio.h>
#include <string.h>
#include "atacmdnames.h"
#include "atacmds.h"
#include "ataprint.h"
#include "smartctl.h"
#include "int64.h"
#include "extern.h"
#include "utility.h"
#include "knowndrives.h"
#include "config.h"
const char *ataprint_c_cvsid="$Id: ataprint.cpp,v 1.156 2004/09/10 04:13:41 ballen4705 Exp $"
ATACMDNAMES_H_CVSID ATACMDS_H_CVSID ATAPRINT_H_CVSID CONFIG_H_CVSID EXTERN_H_CVSID INT64_H_CVSID KNOWNDRIVES_H_CVSID SMARTCTL_H_CVSID UTILITY_H_CVSID;
// for passing global control variables
extern smartmonctrl *con;
// to hold onto exit code for atexit routine
extern int exitstatus;
// Copies n bytes (or n-1 if n is odd) from in to out, but swaps adjacents
// bytes.
void swapbytes(char *out, const char *in, size_t n)
{
size_t i;
for (i = 0; i < n; i += 2) {
out[i] = in[i+1];
out[i+1] = in[i];
}
}
// Copies in to out, but removes leading and trailing whitespace.
void trim(char *out, const char *in)
{
int i, first, last;
// Find the first non-space character (maybe none).
first = -1;
for (i = 0; in[i]; i++)
if (!isspace((int)in[i])) {
first = i;
break;
}
if (first == -1) {
// There are no non-space characters.
out[0] = '\0';
return;
}
// Find the last non-space character.
for (i = strlen(in)-1; i >= first && isspace((int)in[i]); i--)
;
last = i;
strncpy(out, in+first, last-first+1);
out[last-first+1] = '\0';
}
// Convenience function for formatting strings from ata_identify_device
void formatdriveidstring(char *out, const char *in, int n)
{
char tmp[65];
n = n > 64 ? 64 : n;
swapbytes(tmp, in, n);
tmp[n] = '\0';
trim(out, tmp);
}
// Function for printing ASCII byte-swapped strings, skipping white
// space. Please note that this is needed on both big- and
// little-endian hardware.
void printswap(char *output, char *in, unsigned int n){
formatdriveidstring(output, in, n);
if (*output)
pout("%s\n", output);
else
pout("[No Information Found]\n");
}
/* For the given Command Register (CR) and Features Register (FR), attempts
* to construct a string that describes the contents of the Status
* Register (ST) and Error Register (ER). The string is dynamically allocated
* memory and the return value is a pointer to this string. It is up to the
* caller to free this memory. If there is insufficient memory or if the
* meanings of the flags of the error register are not known for the given
* command then it returns NULL.
*
* The meanings of the flags of the error register for all commands are
* described in the ATA spec and could all be supported here in theory.
* Currently, only a few commands are supported (those that have been seen
* to produce errors). If many more are to be added then this function
* should probably be redesigned.
*/
char *construct_st_er_desc(struct ata_smart_errorlog_struct *data) {
unsigned char CR=data->commands[4].commandreg;
unsigned char FR=data->commands[4].featuresreg;
unsigned char ST=data->error_struct.status;
unsigned char ER=data->error_struct.error_register;
char *s;
const char *error_flag[8];
int i, print_lba=0, print_sector=0;
// Set of character strings corresponding to different error codes.
// Please keep in alphabetic order if you add more.
const char *abrt = "ABRT"; // ABORTED
const char *amnf = "AMNF"; // ADDRESS MARK NOT FOUND
const char *ccto = "CCTO"; // COMMAND COMPLETTION TIMED OUT
const char *eom = "EOM"; // END OF MEDIA
const char *icrc = "ICRC"; // INTERFACE CRC ERROR
const char *idnf = "IDNF"; // ID NOT FOUND
const char *ili = "ILI"; // MEANING OF THIS BIT IS COMMAND-SET SPECIFIC
const char *mc = "MC"; // MEDIA CHANGED
const char *mcr = "MCR"; // MEDIA CHANGE REQUEST
const char *nm = "NM"; // NO MEDIA
const char *obs = "obs"; // OBSOLETE
const char *tk0nf = "TK0NF"; // TRACK 0 NOT FOUND
const char *unc = "UNC"; // UNCORRECTABLE
const char *wp = "WP"; // WRITE PROTECTED
/* If for any command the Device Fault flag of the status register is
* not used then used_device_fault should be set to 0 (in the CR switch
* below)
*/
int uses_device_fault = 1;
/* A value of NULL means that the error flag isn't used */
for (i = 0; i < 8; i++)
error_flag[i] = NULL;
switch (CR) {
case 0x10: // RECALIBRATE
error_flag[2] = abrt;
error_flag[1] = tk0nf;
break;
case 0x20: /* READ SECTOR(S) */
case 0x21: // READ SECTOR(S)
case 0x24: // READ SECTOR(S) EXT
case 0xC4: /* READ MULTIPLE */
case 0x29: // READ MULTIPLE EXT
error_flag[6] = unc;
error_flag[5] = mc;
error_flag[4] = idnf;
error_flag[3] = mcr;
error_flag[2] = abrt;
error_flag[1] = nm;
error_flag[0] = amnf;
print_lba=1;
break;
case 0x22: // READ LONG (with retries)
case 0x23: // READ LONG (without retries)
error_flag[4] = idnf;
error_flag[2] = abrt;
error_flag[0] = amnf;
print_lba=1;
break;
case 0x2a: // READ STREAM DMA
case 0x2b: // READ STREAM PIO
if (CR==0x2a)
error_flag[7] = icrc;
error_flag[6] = unc;
error_flag[5] = mc;
error_flag[4] = idnf;
error_flag[3] = mcr;
error_flag[2] = abrt;
error_flag[1] = nm;
error_flag[0] = ccto;
print_lba=1;
print_sector=(int)data->error_struct.sector_count;
break;
case 0x3A: // WRITE STREAM DMA
case 0x3B: // WRITE STREAM PIO
if (CR==0x3A)
error_flag[7] = icrc;
error_flag[6] = wp;
error_flag[5] = mc;
error_flag[4] = idnf;
error_flag[3] = mcr;
error_flag[2] = abrt;
error_flag[1] = nm;
error_flag[0] = ccto;
print_lba=1;
print_sector=(int)data->error_struct.sector_count;
break;
case 0x25: /* READ DMA EXT */
case 0x26: // READ DMA QUEUED EXT
case 0xC7: // READ DMA QUEUED
case 0xC8: /* READ DMA */
case 0xC9:
error_flag[7] = icrc;
error_flag[6] = unc;
error_flag[5] = mc;
error_flag[4] = idnf;
error_flag[3] = mcr;
error_flag[2] = abrt;
error_flag[1] = nm;
error_flag[0] = amnf;
print_lba=1;
if (CR==0x25 || CR==0xC8)
print_sector=(int)data->error_struct.sector_count;
break;
case 0x30: /* WRITE SECTOR(S) */
case 0x31: // WRITE SECTOR(S)
case 0x34: // WRITE SECTOR(S) EXT
case 0xC5: /* WRITE MULTIPLE */
case 0x39: // WRITE MULTIPLE EXT
case 0xCE: // WRITE MULTIPLE FUA EXT
error_flag[6] = wp;
error_flag[5] = mc;
error_flag[4] = idnf;
error_flag[3] = mcr;
error_flag[2] = abrt;
error_flag[1] = nm;
print_lba=1;
break;
case 0x32: // WRITE LONG (with retries)
case 0x33: // WRITE LONG (without retries)
error_flag[4] = idnf;
error_flag[2] = abrt;
print_lba=1;
break;
case 0x3C: // WRITE VERIFY
error_flag[6] = unc;
error_flag[4] = idnf;
error_flag[2] = abrt;
error_flag[0] = amnf;
print_lba=1;
break;
case 0x40: // READ VERIFY SECTOR(S) with retries
case 0x41: // READ VERIFY SECTOR(S) without retries
case 0x42: // READ VERIFY SECTOR(S) EXT
error_flag[6] = unc;
error_flag[5] = mc;
error_flag[4] = idnf;
error_flag[3] = mcr;
error_flag[2] = abrt;
error_flag[1] = nm;
error_flag[0] = amnf;
print_lba=1;
break;
case 0xA0: /* PACKET */
/* Bits 4-7 are all used for sense key (a 'command packet set specific error
* indication' according to the ATA/ATAPI-7 standard), so "Sense key" will
* be repeated in the error description string if more than one of those
* bits is set.
*/
error_flag[7] = "Sense key (bit 3)",
error_flag[6] = "Sense key (bit 2)",
error_flag[5] = "Sense key (bit 1)",
error_flag[4] = "Sense key (bit 0)",
error_flag[2] = abrt;
error_flag[1] = eom;
error_flag[0] = ili;
break;
case 0xA1: /* IDENTIFY PACKET DEVICE */
case 0xEF: /* SET FEATURES */
case 0x00: /* NOP */
case 0xC6: /* SET MULTIPLE MODE */
error_flag[2] = abrt;
break;
case 0x2F: // READ LOG EXT
error_flag[6] = unc;
error_flag[4] = idnf;
error_flag[2] = abrt;
error_flag[0] = obs;
break;
case 0x3F: // WRITE LOG EXT
error_flag[4] = idnf;
error_flag[2] = abrt;
error_flag[0] = obs;
break;
case 0xB0: /* SMART */
switch(FR) {
case 0xD0: // SMART READ DATA
case 0xD1: // SMART READ ATTRIBUTE THRESHOLDS
case 0xD5: /* SMART READ LOG */
error_flag[6] = unc;
error_flag[4] = idnf;
error_flag[2] = abrt;
error_flag[0] = obs;
break;
case 0xD6: /* SMART WRITE LOG */
error_flag[4] = idnf;
error_flag[2] = abrt;
error_flag[0] = obs;
break;
case 0xD2: // Enable/Disable Attribute Autosave
case 0xD3: // SMART SAVE ATTRIBUTE VALUES (ATA-3)
case 0xD8: // SMART ENABLE OPERATIONS
case 0xD9: /* SMART DISABLE OPERATIONS */
case 0xDA: /* SMART RETURN STATUS */
case 0xDB: // Enable/Disable Auto Offline (SFF)
error_flag[2] = abrt;
break;
case 0xD4: // SMART EXECUTE IMMEDIATE OFFLINE
error_flag[4] = idnf;
error_flag[2] = abrt;
break;
default:
return NULL;
break;
}
break;
case 0xB1: /* DEVICE CONFIGURATION */
switch (FR) {
case 0xC0: /* DEVICE CONFIGURATION RESTORE */
error_flag[2] = abrt;
break;
default:
return NULL;
break;
}
break;
case 0xCA: /* WRITE DMA */
case 0xCB:
case 0x35: // WRITE DMA EXT
case 0x3D: // WRITE DMA FUA EXT
case 0xCC: // WRITE DMA QUEUED
case 0x36: // WRITE DMA QUEUED EXT
case 0x3E: // WRITE DMA QUEUED FUA EXT
error_flag[7] = icrc;
error_flag[6] = wp;
error_flag[5] = mc;
error_flag[4] = idnf;
error_flag[3] = mcr;
error_flag[2] = abrt;
error_flag[1] = nm;
error_flag[0] = amnf;
print_lba=1;
if (CR==0x35)
print_sector=(int)data->error_struct.sector_count;
break;
case 0xE4: // READ BUFFER
case 0xE8: // WRITE BUFFER
error_flag[2] = abrt;
break;
default:
return NULL;
}
/* 256 bytes -- that'll be plenty (OK, this is lazy!) */
if (!(s = (char *)malloc(256)))
return s;
s[0] = '\0';
/* We ignore any status flags other than Device Fault and Error */
if (uses_device_fault && (ST & (1 << 5))) {
strcat(s, "Device Fault");
if (ST & 1) // Error flag
strcat(s, "; ");
}
if (ST & 1) { // Error flag
int count = 0;
strcat(s, "Error: ");
for (i = 7; i >= 0; i--)
if ((ER & (1 << i)) && (error_flag[i])) {
if (count++ > 0)
strcat(s, ", ");
strcat(s, error_flag[i]);
}
}
// If the error was a READ or WRITE error, print the Logical Block
// Address (LBA) at which the read or write failed.
if (print_lba) {
char tmp[128];
int lba;
// bits 24-27: bits 0-3 of DH
lba = 0xf & data->error_struct.drive_head;
lba <<= 8;
// bits 16-23: CH
lba |= data->error_struct.cylinder_high;
lba <<= 8;
// bits 8-15: CL
lba |= data->error_struct.cylinder_low;
lba <<= 8;
// bits 0-7: SN
lba |= data->error_struct.sector_number;
// print number of sectors, if known, and append to print string
if (print_sector) {
snprintf(tmp, 128, " %d sectors", print_sector);
strcat(s, tmp);
}
// print LBA, and append to print string
snprintf(tmp, 128, " at LBA = 0x%08x = %d", lba, lba);
strcat(s, tmp);
}
return s;
}
// This returns the capacity of a disk drive and also prints this into
// a string, using comma separators to make it easier to read. If the
// drive doesn't support LBA addressing or has no user writable
// sectors (eg, CDROM or DVD) then routine returns zero.
uint64_t determine_capacity(struct ata_identify_device *drive, char *pstring){
unsigned short command_set_2 = drive->command_set_2;
unsigned short capabilities_0 = drive->words047_079[49-47];
unsigned short sects_16 = drive->words047_079[60-47];
unsigned short sects_32 = drive->words047_079[61-47];
unsigned short lba_16 = drive->words088_255[100-88];
unsigned short lba_32 = drive->words088_255[101-88];
unsigned short lba_48 = drive->words088_255[102-88];
unsigned short lba_64 = drive->words088_255[103-88];
uint64_t capacity_short=0, capacity=0, threedigits, power_of_ten;
int started=0,k=1000000000;
// if drive supports LBA addressing, determine 32-bit LBA capacity
if (capabilities_0 & 0x0200) {
capacity_short = (unsigned int)sects_32 << 16 |
(unsigned int)sects_16 << 0 ;
// if drive supports 48-bit addressing, determine THAT capacity
if ((command_set_2 & 0xc000) == 0x4000 && (command_set_2 & 0x0400))
capacity = (uint64_t)lba_64 << 48 |
(uint64_t)lba_48 << 32 |
(uint64_t)lba_32 << 16 |
(uint64_t)lba_16 << 0 ;
// choose the larger of the two possible capacities
if (capacity_short>capacity)
capacity=capacity_short;
}
// turn sectors into bytes
capacity_short = (capacity *= 512);
// print with comma separators. I know this is anglo-centric:
// tell me what to change to use LOCALE if you want.
power_of_ten = k;
power_of_ten *= k;
for (k=0; k<7; k++) {
threedigits = capacity/power_of_ten;
capacity -= threedigits*power_of_ten;
if (started)
// we have already printed some digits
pstring += sprintf(pstring, ",%03"PRIu64, threedigits);
else if (threedigits || k==6) {
// these are the first digits that we are printing
pstring += sprintf(pstring, "%"PRIu64, threedigits);
started = 1;
}
if (k!=6)
power_of_ten /= 1000;
}
return capacity_short;
}
void ataPrintDriveInfo (struct ata_identify_device *drive){
int version, drivetype;
const char *description;
char unknown[64], timedatetz[DATEANDEPOCHLEN];
unsigned short minorrev;
char model[64], serial[64], firm[64], capacity[64];
// print out model, serial # and firmware versions (byte-swap ASCI strings)
pout("Device Model: ");
printswap(model, (char *)drive->model,40);
pout("Serial Number: ");
printswap(serial, (char *)drive->serial_no,20);
pout("Firmware Version: ");
printswap(firm, (char *)drive->fw_rev,8);
if (determine_capacity(drive, capacity))
pout("User Capacity: %s bytes\n", capacity);
// See if drive is recognized
drivetype=lookupdrive(model, firm);
pout("Device is: %s\n", drivetype<0?
"Not in smartctl database [for details use: -P showall]":
"In smartctl database [for details use: -P show]");
// now get ATA version info
version=ataVersionInfo(&description,drive, &minorrev);
// unrecognized minor revision code
if (!description){
if (!minorrev)
sprintf(unknown, "Exact ATA specification draft version not indicated");
else
sprintf(unknown,"Not recognized. Minor revision code: 0x%02hx", minorrev);
description=unknown;
}
// SMART Support was first added into the ATA/ATAPI-3 Standard with
// Revision 3 of the document, July 25, 1995. Look at the "Document
// Status" revision commands at the beginning of
// http://www.t13.org/project/d2008r6.pdf to see this. So it's not
// enough to check if we are ATA-3. Version=-3 indicates ATA-3
// BEFORE Revision 3.
pout("ATA Version is: %d\n",(int)abs(version));
pout("ATA Standard is: %s\n",description);
// print current time and date and timezone
dateandtimezone(timedatetz);
pout("Local Time is: %s\n", timedatetz);
// Print warning message, if there is one
if (drivetype>=0 && knowndrives[drivetype].warningmsg)
pout("\n==> WARNING: %s\n\n", knowndrives[drivetype].warningmsg);
if (version>=3)
return;
pout("SMART is only available in ATA Version 3 Revision 3 or greater.\n");
pout("We will try to proceed in spite of this.\n");
return;
}
const char *OfflineDataCollectionStatus(unsigned char status_byte){
unsigned char stat=status_byte & 0x7f;
switch(stat){
case 0x00:
return "was never started";
case 0x02:
return "was completed without error";
case 0x03:
if (status_byte == 0x03)
return "is in progress";
else
return "is in a Reserved state";
case 0x04:
return "was suspended by an interrupting command from host";
case 0x05:
return "was aborted by an interrupting command from host";
case 0x06:
return "was aborted by the device with a fatal error";
default:
if (stat >= 0x40)
return "is in a Vendor Specific state\n";
else
return "is in a Reserved state\n";
}
}
/* prints verbose value Off-line data collection status byte */
void PrintSmartOfflineStatus(struct ata_smart_values *data){
pout("Offline data collection status: (0x%02x)\t",
(int)data->offline_data_collection_status);
// Off-line data collection status byte is not a reserved
// or vendor specific value
pout("Offline data collection activity\n"
"\t\t\t\t\t%s.\n", OfflineDataCollectionStatus(data->offline_data_collection_status));
// Report on Automatic Data Collection Status. Only IBM documents
// this bit. See SFF 8035i Revision 2 for details.
if (data->offline_data_collection_status & 0x80)
pout("\t\t\t\t\tAuto Offline Data Collection: Enabled.\n");
else
pout("\t\t\t\t\tAuto Offline Data Collection: Disabled.\n");
return;
}
void PrintSmartSelfExecStatus(struct ata_smart_values *data)
{
pout("Self-test execution status: ");
switch (data->self_test_exec_status >> 4)
{
case 0:
pout("(%4d)\tThe previous self-test routine completed\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("without error or no self-test has ever \n\t\t\t\t\tbeen run.\n");
break;
case 1:
pout("(%4d)\tThe self-test routine was aborted by\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("the host.\n");
break;
case 2:
pout("(%4d)\tThe self-test routine was interrupted\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("by the host with a hard or soft reset.\n");
break;
case 3:
pout("(%4d)\tA fatal error or unknown test error\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("occurred while the device was executing\n\t\t\t\t\t");
pout("its self-test routine and the device \n\t\t\t\t\t");
pout("was unable to complete the self-test \n\t\t\t\t\t");
pout("routine.\n");
break;
case 4:
pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("a test element that failed and the test\n\t\t\t\t\t");
pout("element that failed is not known.\n");
break;
case 5:
pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("the electrical element of the test\n\t\t\t\t\t");
pout("failed.\n");
break;
case 6:
pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("the servo (and/or seek) element of the \n\t\t\t\t\t");
pout("test failed.\n");
break;
case 7:
pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("the read element of the test failed.\n");
break;
case 15:
pout("(%4d)\tSelf-test routine in progress...\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("%1d0%% of test remaining.\n",
(int)(data->self_test_exec_status & 0x0f));
break;
default:
pout("(%4d)\tReserved.\n",
(int)data->self_test_exec_status);
break;
}
}
void PrintSmartTotalTimeCompleteOffline ( struct ata_smart_values *data){
pout("Total time to complete Offline \n");
pout("data collection: \t\t (%4d) seconds.\n",
(int)data->total_time_to_complete_off_line);
}
void PrintSmartOfflineCollectCap(struct ata_smart_values *data){
pout("Offline data collection\n");
pout("capabilities: \t\t\t (0x%02x) ",
(int)data->offline_data_collection_capability);
if (data->offline_data_collection_capability == 0x00){
pout("\tOffline data collection not supported.\n");
}
else {
pout( "%s\n", isSupportExecuteOfflineImmediate(data)?
"SMART execute Offline immediate." :
"No SMART execute Offline immediate.");
pout( "\t\t\t\t\t%s\n", isSupportAutomaticTimer(data)?
"Auto Offline data collection on/off support.":
"No Auto Offline data collection support.");
pout( "\t\t\t\t\t%s\n", isSupportOfflineAbort(data)?
"Abort Offline collection upon new\n\t\t\t\t\tcommand.":
"Suspend Offline collection upon new\n\t\t\t\t\tcommand.");
pout( "\t\t\t\t\t%s\n", isSupportOfflineSurfaceScan(data)?
"Offline surface scan supported.":
"No Offline surface scan supported.");
pout( "\t\t\t\t\t%s\n", isSupportSelfTest(data)?
"Self-test supported.":
"No Self-test supported.");
pout( "\t\t\t\t\t%s\n", isSupportConveyanceSelfTest(data)?
"Conveyance Self-test supported.":
"No Conveyance Self-test supported.");
pout( "\t\t\t\t\t%s\n", isSupportSelectiveSelfTest(data)?
"Selective Self-test supported.":
"No Selective Self-test supported.");
}
}
void PrintSmartCapability ( struct ata_smart_values *data)
{
pout("SMART capabilities: ");
pout("(0x%04x)\t", (int)data->smart_capability);
if (data->smart_capability == 0x00)
{
pout("Automatic saving of SMART data\t\t\t\t\tis not implemented.\n");
}
else
{
pout( "%s\n", (data->smart_capability & 0x01)?
"Saves SMART data before entering\n\t\t\t\t\tpower-saving mode.":
"Does not save SMART data before\n\t\t\t\t\tentering power-saving mode.");
if ( data->smart_capability & 0x02 )
{
pout("\t\t\t\t\tSupports SMART auto save timer.\n");
}
}
}
void PrintSmartErrorLogCapability (struct ata_smart_values *data, struct ata_identify_device *identity)
{
pout("Error logging capability: ");
if ( isSmartErrorLogCapable(data, identity) )
{
pout(" (0x%02x)\tError logging supported.\n",
(int)data->errorlog_capability);
}
else {
pout(" (0x%02x)\tError logging NOT supported.\n",
(int)data->errorlog_capability);
}
}
void PrintSmartShortSelfTestPollingTime(struct ata_smart_values *data){
pout("Short self-test routine \n");
if (isSupportSelfTest(data))
pout("recommended polling time: \t (%4d) minutes.\n",
(int)data->short_test_completion_time);
else
pout("recommended polling time: \t Not Supported.\n");
}
void PrintSmartExtendedSelfTestPollingTime(struct ata_smart_values *data){
pout("Extended self-test routine\n");
if (isSupportSelfTest(data))
pout("recommended polling time: \t (%4d) minutes.\n",
(int)data->extend_test_completion_time);
else
pout("recommended polling time: \t Not Supported.\n");
}
void PrintSmartConveyanceSelfTestPollingTime(struct ata_smart_values *data){
pout("Conveyance self-test routine\n");
if (isSupportConveyanceSelfTest(data))
pout("recommended polling time: \t (%4d) minutes.\n",
(int)data->conveyance_test_completion_time);
else
pout("recommended polling time: \t Not Supported.\n");
}
// onlyfailed=0 : print all attribute values
// onlyfailed=1: just ones that are currently failed and have prefailure bit set
// onlyfailed=2: ones that are failed, or have failed with or without prefailure bit set
void PrintSmartAttribWithThres (struct ata_smart_values *data,
struct ata_smart_thresholds_pvt *thresholds,
int onlyfailed){
int i;
int needheader=1;
char rawstring[64];
// step through all vendor attributes
for (i=0; i<NUMBER_ATA_SMART_ATTRIBUTES; i++){
char *status;
struct ata_smart_attribute *disk=data->vendor_attributes+i;
struct ata_smart_threshold_entry *thre=thresholds->thres_entries+i;
// consider only valid attributes (allowing some screw-ups in the
// thresholds page data to slip by)
if (disk->id){
char *type, *update;
int failednow,failedever;
char attributename[64];
failednow = (disk->current <= thre->threshold);
failedever= (disk->worst <= thre->threshold);
// These break out of the loop if we are only printing certain entries...
if (onlyfailed==1 && (!ATTRIBUTE_FLAGS_PREFAILURE(disk->flags) || !failednow))
continue;
if (onlyfailed==2 && !failedever)
continue;
// print header only if needed
if (needheader){
if (!onlyfailed){
pout("SMART Attributes Data Structure revision number: %d\n",(int)data->revnumber);
pout("Vendor Specific SMART Attributes with Thresholds:\n");
}
pout("ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE\n");
needheader=0;
}
// is this Attribute currently failed, or has it ever failed?
if (failednow)
status="FAILING_NOW";
else if (failedever)
status="In_the_past";
else
status=" -";
// Print name of attribute
ataPrintSmartAttribName(attributename,disk->id, con->attributedefs);
pout("%-28s",attributename);
// printing line for each valid attribute
type=ATTRIBUTE_FLAGS_PREFAILURE(disk->flags)?"Pre-fail":"Old_age";
update=ATTRIBUTE_FLAGS_ONLINE(disk->flags)?"Always":"Offline";
pout("0x%04x %.3d %.3d %.3d %-10s%-9s%-12s",
(int)disk->flags, (int)disk->current, (int)disk->worst,
(int)thre->threshold, type, update, status);
// print raw value of attribute
ataPrintSmartAttribRawValue(rawstring, disk, con->attributedefs);
pout("%s\n", rawstring);
// print a warning if there is inconsistency here!
if (disk->id != thre->id){
char atdat[64],atthr[64];
ataPrintSmartAttribName(atdat, disk->id, con->attributedefs);
ataPrintSmartAttribName(atthr, thre->id, con->attributedefs);
pout("%-28s<== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO\n",atdat);
pout("%-28s<== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA\n",atthr);
}
}
}
if (!needheader) pout("\n");
}
void ataPrintGeneralSmartValues(struct ata_smart_values *data, struct ata_identify_device *drive){
pout("General SMART Values:\n");
PrintSmartOfflineStatus(data);
if (isSupportSelfTest(data)){
PrintSmartSelfExecStatus (data);
}
PrintSmartTotalTimeCompleteOffline(data);
PrintSmartOfflineCollectCap(data);
PrintSmartCapability(data);
PrintSmartErrorLogCapability(data, drive);
pout( "\t\t\t\t\t%s\n", isGeneralPurposeLoggingCapable(drive)?
"General Purpose Logging supported.":
"No General Purpose Logging support.");
if (isSupportSelfTest(data)){
PrintSmartShortSelfTestPollingTime (data);
PrintSmartExtendedSelfTestPollingTime (data);
}
if (isSupportConveyanceSelfTest(data))
PrintSmartConveyanceSelfTestPollingTime (data);
pout("\n");
}
int ataPrintLogDirectory(struct ata_smart_log_directory *data){
int i;
char *name;
pout("SMART Log Directory Logging Version %d%s\n",
data->logversion, data->logversion==1?" [multi-sector log support]":"");
for (i=0; i<=255; i++){
int numsect;
// Directory log length
numsect = i? data->entry[i-1].numsectors : 1;
// If the log is not empty, what is it's name
if (numsect){
switch (i) {
case 0:
name="Log Directory"; break;
case 1:
name="Summary SMART error log"; break;
case 2:
name="Comprehensive SMART error log"; break;
case 3:
name="Extended Comprehensive SMART error log"; break;
case 6:
name="SMART self-test log"; break;
case 7:
name="Extended self-test log"; break;
case 9:
name="Selective self-test log"; break;
case 0x20:
name="Streaming performance log"; break;
case 0x21:
name="Write stream error log"; break;
case 0x22:
name="Read stream error log"; break;
case 0x23:
name="Delayed sector log"; break;
default:
if (0xa0<=i && i<=0xbf)
name="Device vendor specific log";
else if (0x80<=i && i<=0x9f)
name="Host vendor specific log";
else
name="Reserved log";
break;
}
// print name and length of log
pout("Log at address 0x%02x has %03d sectors [%s]\n",
i, numsect, name);
}
}
return 0;
}
// returns number of errors
int ataPrintSmartErrorlog(struct ata_smart_errorlog *data){
int k;
pout("SMART Error Log Version: %d\n", (int)data->revnumber);
// if no errors logged, return
if (!data->error_log_pointer){
pout("No Errors Logged\n\n");
return 0;
}
PRINT_ON(con);
// If log pointer out of range, return
if (data->error_log_pointer>5){
pout("Invalid Error Log index = 0x%02x (T13/1321D rev 1c "
"Section 8.41.6.8.2.2 gives valid range from 1 to 5)\n\n",
(int)data->error_log_pointer);
return 0;
}
// Some internal consistency checking of the data structures
if ((data->ata_error_count-data->error_log_pointer)%5 && con->fixfirmwarebug != FIX_SAMSUNG2) {
pout("Warning: ATA error count %d inconsistent with error log pointer %d\n\n",
data->ata_error_count,data->error_log_pointer);
}
// starting printing error log info
if (data->ata_error_count<=5)
pout( "ATA Error Count: %d\n", (int)data->ata_error_count);
else
pout( "ATA Error Count: %d (device log contains only the most recent five errors)\n",
(int)data->ata_error_count);
PRINT_OFF(con);
pout("\tCR = Command Register [HEX]\n"
"\tFR = Features Register [HEX]\n"
"\tSC = Sector Count Register [HEX]\n"
"\tSN = Sector Number Register [HEX]\n"
"\tCL = Cylinder Low Register [HEX]\n"
"\tCH = Cylinder High Register [HEX]\n"
"\tDH = Device/Head Register [HEX]\n"
"\tDC = Device Command Register [HEX]\n"
"\tER = Error register [HEX]\n"
"\tST = Status register [HEX]\n"
"Powered_Up_Time is measured from power on, and printed as\n"
"DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,\n"
"SS=sec, and sss=millisec. It \"wraps\" after 49.710 days.\n\n");
// now step through the five error log data structures (table 39 of spec)
for (k = 4; k >= 0; k-- ) {
char *st_er_desc;
// The error log data structure entries are a circular buffer
int j, i=(data->error_log_pointer+k)%5;
struct ata_smart_errorlog_struct *elog=data->errorlog_struct+i;
struct ata_smart_errorlog_error_struct *summary=&(elog->error_struct);
// Spec says: unused error log structures shall be zero filled
if (nonempty((unsigned char*)elog,sizeof(*elog))){
// Table 57 of T13/1532D Volume 1 Revision 3
char *msgstate;
int bits=summary->state & 0x0f;
int days = (int)summary->timestamp/24;
switch (bits){
case 0x00: msgstate="in an unknown state";break;
case 0x01: msgstate="sleeping"; break;
case 0x02: msgstate="in standby mode"; break;
case 0x03: msgstate="active or idle"; break;
case 0x04: msgstate="doing SMART Offline or Self-test"; break;
default:
if (bits<0x0b)
msgstate="in a reserved state";
else
msgstate="in a vendor specific state";
}
// See table 42 of ATA5 spec
PRINT_ON(con);
pout("Error %d occurred at disk power-on lifetime: %d hours (%d days + %d hours)\n",
(int)(data->ata_error_count+k-4), (int)summary->timestamp, days, (int)(summary->timestamp-24*days));
PRINT_OFF(con);
pout(" When the command that caused the error occurred, the device was %s.\n\n",msgstate);
pout(" After command completion occurred, registers were:\n"
" ER ST SC SN CL CH DH\n"
" -- -- -- -- -- -- --\n"
" %02x %02x %02x %02x %02x %02x %02x",
(int)summary->error_register,
(int)summary->status,
(int)summary->sector_count,
(int)summary->sector_number,
(int)summary->cylinder_low,
(int)summary->cylinder_high,
(int)summary->drive_head);
// Add a description of the contents of the status and error registers
// if possible
st_er_desc = construct_st_er_desc(elog);
if (st_er_desc) {
pout(" %s", st_er_desc);
free(st_er_desc);
}
pout("\n\n");
pout(" Commands leading to the command that caused the error were:\n"
" CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name\n"
" -- -- -- -- -- -- -- -- ---------------- --------------------\n");
for ( j = 4; j >= 0; j--){
struct ata_smart_errorlog_command_struct *thiscommand=elog->commands+j;
// Spec says: unused data command structures shall be zero filled
if (nonempty((unsigned char*)thiscommand,sizeof(*thiscommand))) {
char timestring[32];
// Convert integer milliseconds to a text-format string
MsecToText(thiscommand->timestamp, timestring);
pout(" %02x %02x %02x %02x %02x %02x %02x %02x %16s %s\n",
(int)thiscommand->commandreg,
(int)thiscommand->featuresreg,
(int)thiscommand->sector_count,
(int)thiscommand->sector_number,
(int)thiscommand->cylinder_low,
(int)thiscommand->cylinder_high,
(int)thiscommand->drive_head,
(int)thiscommand->devicecontrolreg,
timestring,
look_up_ata_command(thiscommand->commandreg, thiscommand->featuresreg));
}
}
pout("\n");
}
}
PRINT_ON(con);
if (con->printing_switchable)
pout("\n");
PRINT_OFF(con);
return data->ata_error_count;
}
void ataPrintSelectiveSelfTestLog(struct ata_selective_self_test_log *log, struct ata_smart_values *sv) {
int i,field1,field2;
char *msg;
char tmp[64];
uint64_t maxl=0,maxr=0;
uint64_t current=log->currentlba;
uint64_t currentend=current+65535;
// print data structure revision number
pout("SMART Selective self-test log data structure revision number %d\n",(int)log->logversion);
if (1 != log->logversion)
pout("Warning: ATA Specification requires selective self-test log data structure revision number = 1\n");
switch((sv->self_test_exec_status)>>4){
case 0:msg="Completed";
break;
case 1:msg="Aborted_by_host";
break;
case 2:msg="Interrupted";
break;
case 3:msg="Fatal_error";
break;
case 4:msg="Completed_unknown_failure";
break;
case 5:msg="Completed_electrical_failure";
break;
case 6:msg="Completed_servo/seek_failure";
break;
case 7:msg="Completed_read_failure";
break;
case 8:msg="Completed_handling_damage??";
break;
case 15:msg="Self_test_in_progress";
break;
default:msg="Unknown_status ";
break;
}
// find the number of columns needed for printing. If in use, the
// start/end of span being read-scanned...
if (log->currentspan>5) {
maxl=current;
maxr=currentend;
}
for (i=0; i<5; i++) {
uint64_t start=log->span[i].start;
uint64_t end =log->span[i].end;
// ... plus max start/end of each of the five test spans.
if (start>maxl)
maxl=start;
if (end > maxr)
maxr=end;
}
// we need at least 7 characters wide fields to accomodate the
// labels
if ((field1=snprintf(tmp,64, "%"PRIu64, maxl))<7)
field1=7;
if ((field2=snprintf(tmp,64, "%"PRIu64, maxr))<7)
field2=7;
// now print the five test spans
pout(" SPAN %*s %*s CURRENT_TEST_STATUS\n", field1, "MIN_LBA", field2, "MAX_LBA");
for (i=0; i<5; i++) {
uint64_t start=log->span[i].start;
uint64_t end=log->span[i].end;
if ((i+1)==(int)log->currentspan)
// this span is currently under test
pout(" %d %*"PRIu64" %*"PRIu64" %s [%01d0%% left] (%"PRIu64"-%"PRIu64")\n",
i+1, field1, start, field2, end, msg,
(int)(sv->self_test_exec_status & 0x7), current, currentend);
else
// this span is not currently under test
pout(" %d %*"PRIu64" %*"PRIu64" Not_testing\n",
i+1, field1, start, field2, end);
}
// if we are currently read-scanning, print LBAs and the status of
// the read scan
if (log->currentspan>5)
pout("%5d %*"PRIu64" %*"PRIu64" Read_scanning %s\n",
(int)log->currentspan, field1, current, field2, currentend,
OfflineDataCollectionStatus(sv->offline_data_collection_status));
/* Print selective self-test flags. Possible flag combinations are
(numbering bits from 0-15):
Bit-1 Bit-3 Bit-4
Scan Pending Active
0 * * Don't scan
1 0 0 Will carry out scan after selective test
1 1 0 Waiting to carry out scan after powerup
1 0 1 Currently scanning
1 1 1 Currently scanning
*/
pout("Selective self-test flags (0x%x):\n", (unsigned int)log->flags);
if (log->flags & SELECTIVE_FLAG_DOSCAN) {
if (log->flags & SELECTIVE_FLAG_ACTIVE)
pout(" Currently read-scanning the remainder of the disk.\n");
else if (log->flags & SELECTIVE_FLAG_PENDING)
pout(" Read-scan of remainder of disk interrupted; will resume %d min after power-up.\n",
(int)log->pendingtime);
else
pout(" After scanning selected spans, read-scan remainder of disk.\n");
}
else
pout(" After scanning selected spans, do NOT read-scan remainder of disk.\n");
// print pending time
pout("If Selective self-test is pending on power-up, resume after %d minute delay.\n",
(int)log->pendingtime);
return;
}
// return value is:
// bottom 8 bits: number of entries found where self-test showed an error
// remaining bits: if nonzero, power on hours of last self-test where error was found
int ataPrintSmartSelfTestlog(struct ata_smart_selftestlog *data,int allentries){
int i,j,noheaderprinted=1;
int retval=0, hours=0, testno=0;
if (allentries)
pout("SMART Self-test log structure revision number %d\n",(int)data->revnumber);
if ((data->revnumber!=0x0001) && allentries && con->fixfirmwarebug != FIX_SAMSUNG)
pout("Warning: ATA Specification requires self-test log structure revision number = 1\n");
if (data->mostrecenttest==0){
if (allentries)
pout("No self-tests have been logged. [To run self-tests, use: smartctl -t]\n\n");
return 0;
}
// print log
for (i=20;i>=0;i--){
struct ata_smart_selftestlog_struct *log;
// log is a circular buffer
j=(i+data->mostrecenttest)%21;
log=data->selftest_struct+j;
if (nonempty((unsigned char*)log,sizeof(*log))){
char *msgtest,*msgstat,percent[64],firstlba[64];
int errorfound=0;
// count entry based on non-empty structures -- needed for
// Seagate only -- other vendors don't have blank entries 'in
// the middle'
testno++;
// test name
switch(log->selftestnumber){
case 0: msgtest="Offline "; break;
case 1: msgtest="Short offline "; break;
case 2: msgtest="Extended offline "; break;
case 3: msgtest="Conveyance offline "; break;
case 4: msgtest="Selective offline "; break;
case 127: msgtest="Abort offline test "; break;
case 129: msgtest="Short captive "; break;
case 130: msgtest="Extended captive "; break;
case 131: msgtest="Conveyance captive "; break;
case 132: msgtest="Selective captive "; break;
default:
if ( log->selftestnumber>=192 ||
(log->selftestnumber>= 64 && log->selftestnumber<=126))
msgtest="Vendor offline ";
else
msgtest="Reserved offline ";
}
// test status
switch((log->selfteststatus)>>4){
case 0:msgstat="Completed without error "; break;
case 1:msgstat="Aborted by host "; break;
case 2:msgstat="Interrupted (host reset) "; break;
case 3:msgstat="Fatal or unknown error "; errorfound=1; break;
case 4:msgstat="Completed: unknown failure "; errorfound=1; break;
case 5:msgstat="Completed: electrical failure"; errorfound=1; break;
case 6:msgstat="Completed: servo/seek failure"; errorfound=1; break;
case 7:msgstat="Completed: read failure "; errorfound=1; break;
case 8:msgstat="Completed: handling damage?? "; errorfound=1; break;
case 15:msgstat="Self-test routine in progress"; break;
default:msgstat="Unknown/reserved test status ";
}
retval+=errorfound;
sprintf(percent,"%1d0%%",(log->selfteststatus)&0xf);
// T13/1321D revision 1c: (Data structure Rev #1)
//The failing LBA shall be the LBA of the uncorrectable sector
//that caused the test to fail. If the device encountered more
//than one uncorrectable sector during the test, this field
//shall indicate the LBA of the first uncorrectable sector
//encountered. If the test passed or the test failed for some
//reason other than an uncorrectable sector, the value of this
//field is undefined.
// This is true in ALL ATA-5 specs
if (!errorfound || log->lbafirstfailure==0xffffffff || log->lbafirstfailure==0x00000000)
sprintf(firstlba,"%s","-");
else
sprintf(firstlba,"%u",log->lbafirstfailure);
// print out a header if needed
if (noheaderprinted && (allentries || errorfound)){
pout("Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error\n");
noheaderprinted=0;
}
// print out an entry, either if we are printing all entries OR
// if an error was found
if (allentries || errorfound)
pout("#%2d %s %s %s %8d %s\n", testno, msgtest, msgstat, percent, (int)log->timestamp, firstlba);
// keep track of time of most recent error
if (errorfound && !hours)
hours=log->timestamp;
}
}
if (!allentries && retval)
pout("\n");
hours = hours << 8;
return (retval | hours);
}
void ataPseudoCheckSmart ( struct ata_smart_values *data,
struct ata_smart_thresholds_pvt *thresholds) {
int i;
int failed = 0;
for (i = 0 ; i < NUMBER_ATA_SMART_ATTRIBUTES ; i++) {
if (data->vendor_attributes[i].id &&
thresholds->thres_entries[i].id &&
ATTRIBUTE_FLAGS_PREFAILURE(data->vendor_attributes[i].flags) &&
(data->vendor_attributes[i].current <= thresholds->thres_entries[i].threshold) &&
(thresholds->thres_entries[i].threshold != 0xFE)){
pout("Attribute ID %d Failed\n",(int)data->vendor_attributes[i].id);
failed = 1;
}
}
pout("%s\n", ( failed )?
"SMART overall-health self-assessment test result: FAILED!\n"
"Drive failure expected in less than 24 hours. SAVE ALL DATA":
"SMART overall-health self-assessment test result: PASSED");
}
// Compares failure type to policy in effect, and either exits or
// simply returns to the calling routine.
void failuretest(int type, int returnvalue){
// If this is an error in an "optional" SMART command
if (type==OPTIONAL_CMD){
if (con->conservative){
pout("An optional SMART command failed: exiting. Remove '-T conservative' option to continue.\n");
EXIT(returnvalue);
}
return;
}
// If this is an error in a "mandatory" SMART command
if (type==MANDATORY_CMD){
if (con->permissive--)
return;
pout("A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.\n");
EXIT(returnvalue);
}
pout("Smartctl internal error in failuretest(type=%d). Please contact developers at " PACKAGE_HOMEPAGE "\n",type);
EXIT(returnvalue|FAILCMD);
}
// Used to warn users about invalid checksums. Action to be taken may be
// altered by the user.
void checksumwarning(const char *string){
// user has asked us to ignore checksum errors
if (con->checksumignore)
return;
pout("Warning! %s error: invalid SMART checksum.\n",string);
// user has asked us to fail on checksum errors
if (con->checksumfail)
EXIT(FAILSMART);
return;
}
// Initialize to zero just in case some SMART routines don't work
struct ata_identify_device drive;
struct ata_smart_values smartval;
struct ata_smart_thresholds_pvt smartthres;
struct ata_smart_errorlog smarterror;
struct ata_smart_selftestlog smartselftest;
int ataPrintMain (int fd){
int timewait,code;
int returnval=0, retid=0, supported=0, needupdate=0;
// Start by getting Drive ID information. We need this, to know if SMART is supported.
if ((retid=ataReadHDIdentity(fd,&drive))<0){
pout("Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)\n\n");
failuretest(MANDATORY_CMD, returnval|=FAILID);
}
// If requested, show which presets would be used for this drive and exit.
if (con->showpresets) {
showpresets(&drive);
EXIT(0);
}
// Use preset vendor attribute options unless user has requested otherwise.
if (!con->ignorepresets){
unsigned char *charptr;
if ((charptr=con->attributedefs))
applypresets(&drive, &charptr, con);
else {
pout("Fatal internal error in ataPrintMain()\n");
EXIT(returnval|=FAILCMD);
}
}
// Print most drive identity information if requested
if (con->driveinfo){
pout("=== START OF INFORMATION SECTION ===\n");
ataPrintDriveInfo(&drive);
}
// Was this a packet device?
if (retid>0){
pout("SMART support is: Unavailable - Packet Interface Devices [this device: %s] don't support ATA SMART\n", packetdevicetype(retid-1));
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
// if drive does not supports SMART it's time to exit
supported=ataSmartSupport(&drive);
if (supported != 1){
if (supported==0) {
pout("SMART support is: Unavailable - device lacks SMART capability.\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
pout(" Checking to be sure by trying SMART ENABLE command.\n");
}
else {
pout("SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
pout(" Checking for SMART support by trying SMART ENABLE command.\n");
}
if (ataEnableSmart(fd)){
pout(" SMART ENABLE failed - this establishes that this device lacks SMART functionality.\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
supported=0;
}
else {
pout(" SMART ENABLE appeared to work! Continuing.\n");
supported=1;
}
if (!con->driveinfo) pout("\n");
}
// Now print remaining drive info: is SMART enabled?
if (con->driveinfo){
int ison=ataIsSmartEnabled(&drive),isenabled=ison;
if (ison==-1) {
pout("SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
// check SMART support by trying a command
pout(" Checking to be sure by trying SMART RETURN STATUS command.\n");
isenabled=ataDoesSmartWork(fd);
}
else
pout("SMART support is: Available - device has SMART capability.\n");
if (isenabled)
pout("SMART support is: Enabled\n");
else {
if (ison==-1)
pout("SMART support is: Unavailable\n");
else
pout("SMART support is: Disabled\n");
}
pout("\n");
}
// START OF THE ENABLE/DISABLE SECTION OF THE CODE
if (con->smartenable || con->smartdisable ||
con->smartautosaveenable || con->smartautosavedisable ||
con->smartautoofflineenable || con->smartautoofflinedisable)
pout("=== START OF ENABLE/DISABLE COMMANDS SECTION ===\n");
// Enable/Disable SMART commands
if (con->smartenable){
if (ataEnableSmart(fd)) {
pout("Smartctl: SMART Enable Failed.\n\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
else
pout("SMART Enabled.\n");
}
// From here on, every command requires that SMART be enabled...
if (!ataDoesSmartWork(fd)) {
pout("SMART Disabled. Use option -s with argument 'on' to enable it.\n");
return returnval;
}
// Turn off SMART on device
if (con->smartdisable){
if (ataDisableSmart(fd)) {
pout( "Smartctl: SMART Disable Failed.\n\n");
failuretest(MANDATORY_CMD,returnval|=FAILSMART);
}
pout("SMART Disabled. Use option -s with argument 'on' to enable it.\n");
return returnval;
}
// Let's ALWAYS issue this command to get the SMART status
code=ataSmartStatus2(fd);
if (code==-1)
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
// Enable/Disable Auto-save attributes
if (con->smartautosaveenable){
if (ataEnableAutoSave(fd)){
pout( "Smartctl: SMART Enable Attribute Autosave Failed.\n\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
else
pout("SMART Attribute Autosave Enabled.\n");
}
if (con->smartautosavedisable){
if (ataDisableAutoSave(fd)){
pout( "Smartctl: SMART Disable Attribute Autosave Failed.\n\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
else
pout("SMART Attribute Autosave Disabled.\n");
}
// for everything else read values and thresholds are needed
if (ataReadSmartValues(fd, &smartval)){
pout("Smartctl: SMART Read Values failed.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
if (ataReadSmartThresholds(fd, &smartthres)){
pout("Smartctl: SMART Read Thresholds failed.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
// Enable/Disable Off-line testing
if (con->smartautoofflineenable){
if (!isSupportAutomaticTimer(&smartval)){
pout("Warning: device does not support SMART Automatic Timers.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
needupdate=1;
if (ataEnableAutoOffline(fd)){
pout( "Smartctl: SMART Enable Automatic Offline Failed.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else
pout("SMART Automatic Offline Testing Enabled every four hours.\n");
}
if (con->smartautoofflinedisable){
if (!isSupportAutomaticTimer(&smartval)){
pout("Warning: device does not support SMART Automatic Timers.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
needupdate=1;
if (ataDisableAutoOffline(fd)){
pout("Smartctl: SMART Disable Automatic Offline Failed.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else
pout("SMART Automatic Offline Testing Disabled.\n");
}
if (needupdate && ataReadSmartValues(fd, &smartval)){
pout("Smartctl: SMART Read Values failed.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
// all this for a newline!
if (con->smartenable || con->smartdisable ||
con->smartautosaveenable || con->smartautosavedisable ||
con->smartautoofflineenable || con->smartautoofflinedisable)
pout("\n");
// START OF READ-ONLY OPTIONS APART FROM -V and -i
if (con->checksmart || con->generalsmartvalues || con->smartvendorattrib || con->smarterrorlog || con->smartselftestlog)
pout("=== START OF READ SMART DATA SECTION ===\n");
// Check SMART status (use previously returned value)
if (con->checksmart){
switch (code) {
case 0:
// The case where the disk health is OK
pout("SMART overall-health self-assessment test result: PASSED\n");
if (ataCheckSmart(&smartval, &smartthres,0)){
if (con->smartvendorattrib)
pout("See vendor-specific Attribute list for marginal Attributes.\n\n");
else {
PRINT_ON(con);
pout("Please note the following marginal Attributes:\n");
PrintSmartAttribWithThres(&smartval, &smartthres,2);
}
returnval|=FAILAGE;
}
else
pout("\n");
break;
case 1:
// The case where the disk health is NOT OK
PRINT_ON(con);
pout("SMART overall-health self-assessment test result: FAILED!\n"
"Drive failure expected in less than 24 hours. SAVE ALL DATA.\n");
PRINT_OFF(con);
if (ataCheckSmart(&smartval, &smartthres,1)){
returnval|=FAILATTR;
if (con->smartvendorattrib)
pout("See vendor-specific Attribute list for failed Attributes.\n\n");
else {
PRINT_ON(con);
pout("Failed Attributes:\n");
PrintSmartAttribWithThres(&smartval, &smartthres,1);
}
}
else
pout("No failed Attributes found.\n\n");
returnval|=FAILSTATUS;
PRINT_OFF(con);
break;
case -1:
default:
// The case where something went wrong with HDIO_DRIVE_TASK ioctl()
if (ataCheckSmart(&smartval, &smartthres,1)){
PRINT_ON(con);
pout("SMART overall-health self-assessment test result: FAILED!\n"
"Drive failure expected in less than 24 hours. SAVE ALL DATA.\n");
PRINT_OFF(con);
returnval|=FAILATTR;
returnval|=FAILSTATUS;
if (con->smartvendorattrib)
pout("See vendor-specific Attribute list for failed Attributes.\n\n");
else {
PRINT_ON(con);
pout("Failed Attributes:\n");
PrintSmartAttribWithThres(&smartval, &smartthres,1);
}
}
else {
pout("SMART overall-health self-assessment test result: PASSED\n");
if (ataCheckSmart(&smartval, &smartthres,0)){
if (con->smartvendorattrib)
pout("See vendor-specific Attribute list for marginal Attributes.\n\n");
else {
PRINT_ON(con);
pout("Please note the following marginal Attributes:\n");
PrintSmartAttribWithThres(&smartval, &smartthres,2);
}
returnval|=FAILAGE;
}
else
pout("\n");
}
PRINT_OFF(con);
break;
} // end of switch statement
PRINT_OFF(con);
} // end of checking SMART Status
// Print general SMART values
if (con->generalsmartvalues)
ataPrintGeneralSmartValues(&smartval, &drive);
// Print vendor-specific attributes
if (con->smartvendorattrib){
PRINT_ON(con);
PrintSmartAttribWithThres(&smartval, &smartthres,con->printing_switchable?2:0);
PRINT_OFF(con);
}
// Print SMART log Directory
if (con->smartlogdirectory){
struct ata_smart_log_directory smartlogdirectory;
if (!isGeneralPurposeLoggingCapable(&drive)){
pout("Warning: device does not support General Purpose Logging\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
PRINT_ON(con);
pout("Log Directory Supported\n");
if (ataReadLogDirectory(fd, &smartlogdirectory)){
PRINT_OFF(con);
pout("Read Log Directory failed.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else
ataPrintLogDirectory( &smartlogdirectory);
}
PRINT_OFF(con);
}
// Print SMART error log
if (con->smarterrorlog){
if (!isSmartErrorLogCapable(&smartval, &drive)){
pout("Warning: device does not support Error Logging\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
if (ataReadErrorLog(fd, &smarterror)){
pout("Smartctl: SMART Error Log Read Failed\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
// quiet mode is turned on inside ataPrintSmartErrorLog()
if (ataPrintSmartErrorlog(&smarterror))
returnval|=FAILERR;
PRINT_OFF(con);
}
}
// Print SMART self-test log
if (con->smartselftestlog){
if (!isSmartTestLogCapable(&smartval, &drive)){
pout("Warning: device does not support Self Test Logging\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
if(ataReadSelfTestLog(fd, &smartselftest)){
pout("Smartctl: SMART Self Test Log Read Failed\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
PRINT_ON(con);
if (ataPrintSmartSelfTestlog(&smartselftest,!con->printing_switchable))
returnval|=FAILLOG;
PRINT_OFF(con);
pout("\n");
}
}
// Print SMART selective self-test log
if (con->selectivetestlog){
struct ata_selective_self_test_log log;
if (!isSupportSelectiveSelfTest(&smartval))
pout("Device does not support Selective Self Tests/Logging\n");
else if(ataReadSelectiveSelfTestLog(fd, &log)) {
pout("Smartctl: SMART Selective Self Test Log Read Failed\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
PRINT_ON(con);
ataPrintSelectiveSelfTestLog(&log, &smartval);
PRINT_OFF(con);
pout("\n");
}
}
// START OF THE TESTING SECTION OF THE CODE. IF NO TESTING, RETURN
if (con->testcase==-1)
return returnval;
pout("=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===\n");
// if doing a self-test, be sure it's supported by the hardware
switch (con->testcase){
case OFFLINE_FULL_SCAN:
if (!isSupportExecuteOfflineImmediate(&smartval)){
pout("Warning: device does not support Execute Offline Immediate function.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
break;
case ABORT_SELF_TEST:
case SHORT_SELF_TEST:
case EXTEND_SELF_TEST:
case SHORT_CAPTIVE_SELF_TEST:
case EXTEND_CAPTIVE_SELF_TEST:
if (!isSupportSelfTest(&smartval)){
pout("Warning: device does not support Self-Test functions.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
break;
case CONVEYANCE_SELF_TEST:
case CONVEYANCE_CAPTIVE_SELF_TEST:
if (!isSupportConveyanceSelfTest(&smartval)){
pout("Warning: device does not support Conveyance Self-Test functions.\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
break;
case SELECTIVE_SELF_TEST:
case SELECTIVE_CAPTIVE_SELF_TEST:
if (!isSupportSelectiveSelfTest(&smartval)){
pout("Warning: device does not support Selective Self-Test functions.\n\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
break;
default:
pout("Internal error in smartctl: con->testcase==%d not recognized\n", (int)con->testcase);
pout("Please contact smartmontools developers at %s.\n", PACKAGE_BUGREPORT);
EXIT(returnval|=FAILCMD);
}
// Now do the test. Note ataSmartTest prints its own error/success
// messages
if (ataSmartTest(fd, con->testcase, &smartval))
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
else {
// Tell user how long test will take to complete. This is tricky
// because in the case of an Offline Full Scan, the completion
// timer is volatile, and needs to be read AFTER the command is
// given. If this will interrupt the Offline Full Scan, we don't
// do it, just warn user.
if (con->testcase==OFFLINE_FULL_SCAN){
if (isSupportOfflineAbort(&smartval))
pout("Note: giving further SMART commands will abort Offline testing\n");
else if (ataReadSmartValues(fd, &smartval)){
pout("Smartctl: SMART Read Values failed.\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
}
// Now say how long the test will take to complete
if ((timewait=TestTime(&smartval,con->testcase))){
time_t t=time(NULL);
if (con->testcase==OFFLINE_FULL_SCAN) {
t+=timewait;
pout("Please wait %d seconds for test to complete.\n", (int)timewait);
} else {
t+=timewait*60;
pout("Please wait %d minutes for test to complete.\n", (int)timewait);
}
pout("Test will complete after %s\n", ctime(&t));
if (con->testcase!=SHORT_CAPTIVE_SELF_TEST &&
con->testcase!=EXTEND_CAPTIVE_SELF_TEST &&
con->testcase!=CONVEYANCE_CAPTIVE_SELF_TEST &&
con->testcase!=SELECTIVE_CAPTIVE_SELF_TEST)
pout("Use smartctl -X to abort test.\n");
}
}
return returnval;
}