Select Git revision
test_rad_pressure.py
-
Daniel Brown authoredadding in more support for nodes. Can now access any node using kat.nodes.n1. Added in functions for Node object to set the gauss parameters. Only added gauss for w0 and z so far.
Daniel Brown authoredadding in more support for nodes. Can now access any node using kat.nodes.n1. Added in functions for Node object to set the gauss parameters. Only added gauss for w0 and z so far.
Makefile 7.72 KiB
# Makefile for smartmontools
#
# Home page: http://smartmontools.sourceforge.net
#
# $Id: Makefile,v 1.39 2002/12/01 12:14:15 pjwilliams Exp $
#
# Copyright (C) 2002 Bruce Allen <smartmontools-support@lists.sourceforge.net>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2, or (at your option) any later
# version.
#
# You should have received a copy of the GNU General Public License (for
# example COPYING); if not, write to the Free Software Foundation, Inc., 675
# Mass Ave, Cambridge, MA 02139, USA.
#
# This code was originally developed as a Senior Thesis by Michael Cornwell
# at the Concurrent Systems Laboratory (now part of the Storage Systems
# Research Center), Jack Baskin School of Engineering, University of
# California, Santa Cruz. http://ssrc.soe.ucsc.edu/
CC = gcc
# Debugging
# CFLAGS = -fsigned-char -Wall -g
# Build against kernel header files. Change linux-2.4 to correct path for your system
# CFLAGS = -fsigned-char -Wall -O2 -I./usr/src/linux-2.4/include
# Normal build NOTE: I have had reports that with gcc 3.2 this code
# fails if you use anything but -Os. I'll remove this comment when
# this is resolved, or I am reminded of it! GCC GNATS bug report
# #8404. If you are getting strange output from gcc 3.2 try
# uncommenting LDFLAGS -s below. Stripping the symbols seems to fix
# the problem.
CFLAGS = -fsigned-char -Wall -O2
CPPFLAGS = -DHAVE_GETOPT_H -DHAVE_GETOPT_LONG
LDFLAGS = # -s
releasefiles=atacmds.c atacmds.h ataprint.c ataprint.h CHANGELOG COPYING extern.h Makefile\
README scsicmds.c scsicmds.h scsiprint.c scsiprint.h smartctl.8 smartctl.c smartctl.h\
smartd.8 smartd.c smartd.h smartd.initd TODO WARNINGS VERSION smartd.conf smartd.conf.5
counter=$(shell cat VERSION)
newcounter=$(shell ./add )
pkgname=smartmontools-5.0
pkgname2=$(pkgname)-$(counter)
all: smartd smartctl
@echo -e "\n\nSmartd can now use a configuration file /etc/smartd.conf. Do:\n\n\tman ./smartd.8\n\tman ./smartctl.8\n"
@echo -e "to read the manual pages now. Unless you do a \"make install\" the manual pages won't be installed.\n"
smartctl: smartctl.c atacmds.o ataprint.o scsicmds.o scsiprint.o \
smartctl.h atacmds.h ataprint.h scsicmds.h scsiprint.h extern.h VERSION Makefile
$(CC) -DSMARTMONTOOLS_VERSION=$(counter) -o smartctl $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) smartctl.c \
atacmds.o scsicmds.o ataprint.o scsiprint.o
smartd: smartd.c atacmds.o ataprint.o scsicmds.o \
smartd.h atacmds.h ataprint.h scsicmds.h extern.h VERSION Makefile
$(CC) -DSMARTMONTOOLS_VERSION=$(counter) -o smartd $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) smartd.c \
scsicmds.o atacmds.o ataprint.o
atacmds.o: atacmds.h atacmds.c Makefile
$(CC) $(CFLAGS) $(CPPFLAGS) -c atacmds.c
ataprint.o: ataprint.c atacmds.h ataprint.h smartctl.h extern.h Makefile
$(CC) $(CFLAGS) $(CPPFLAGS) -c ataprint.c
scsicmds.o: scsicmds.c scsicmds.h Makefile $(CC) $(CFLAGS) $(CPPFLAGS) -c scsicmds.c
scsiprint.o: scsiprint.c extern.h scsicmds.h scsiprint.h smartctl.h Makefile
$(CC) $(CFLAGS) $(CPPFLAGS) -c scsiprint.c
# This extracts the configuration file directives from smartd.8 and
# inserts them into smartd.conf.5
smartd.conf.5: smartd.8
sed '1,/STARTINCLUDE/ D;/ENDINCLUDE/,$$D' < smartd.8 > tmp.directives
sed '/STARTINCLUDE/,$$D' < smartd.conf.5 > tmp.head
sed '1,/ENDINCLUDE/D' < smartd.conf.5 > tmp.tail
cat tmp.head > smartd.conf.5
echo "\# STARTINCLUDE" >> smartd.conf.5
cat tmp.directives >> smartd.conf.5
echo "\# ENDINCLUDE" >> smartd.conf.5
cat tmp.tail >> smartd.conf.5
rm -f tmp.head tmp.tail tmp.directives
clean:
rm -f *.o smartctl smartd *~ \#*\# smartmontools*.tar.gz smartmontools*.rpm temp.* smart*.8.gz smart*.5.gz
install:
if [ ! -f smartd -o ! -f smartctl ] ; then echo -e "\n\nYOU MUST FIRST DO \"make\"\n" ; exit 1 ; fi
/bin/gzip -c smartctl.8 > smartctl.8.gz
/bin/gzip -c smartd.8 > smartd.8.gz
/bin/gzip -c smartd.conf.5 > smartd.conf.5.gz
rm -f $(DESTDIR)/usr/share/man/man8/smartctl.8
rm -f $(DESTDIR)/usr/share/man/man8/smartd.8
install -m 755 -o root -g root -D smartctl $(DESTDIR)/usr/sbin/smartctl
install -m 755 -o root -g root -D smartd $(DESTDIR)/usr/sbin/smartd
install -m 755 -o root -g root -D smartd.initd $(DESTDIR)/etc/rc.d/init.d/smartd
install -m 644 -o root -g root -D smartctl.8.gz $(DESTDIR)/usr/share/man/man8/smartctl.8.gz
install -m 644 -o root -g root -D smartd.8.gz $(DESTDIR)/usr/share/man/man8/smartd.8.gz
install -m 644 -o root -g root -D smartd.conf.5.gz $(DESTDIR)/usr/share/man/man5/smartd.conf.5.gz
install -m 644 -o root -g root -D CHANGELOG $(DESTDIR)/usr/share/doc/smartmontools-5.0/CHANGELOG
install -m 644 -o root -g root -D COPYING $(DESTDIR)/usr/share/doc/smartmontools-5.0/COPYING
install -m 644 -o root -g root -D README $(DESTDIR)/usr/share/doc/smartmontools-5.0/README
install -m 644 -o root -g root -D TODO $(DESTDIR)/usr/share/doc/smartmontools-5.0/TODO
install -m 644 -o root -g root -D VERSION $(DESTDIR)/usr/share/doc/smartmontools-5.0/VERSION
install -m 644 -o root -g root -D WARNINGS $(DESTDIR)/usr/share/doc/smartmontools-5.0/WARNINGS
install -m 644 -o root -g root -D smartd.conf $(DESTDIR)/usr/share/doc/smartmontools-5.0/smartd.conf
install -m 644 -o root -g root -D smartd.conf $(DESTDIR)/etc/smartd.conf.example
if [ ! -f $(DESTDIR)/etc/smartd.conf ] ; then install -m 644 -o root -g root -D smartd.conf $(DESTDIR)/etc/smartd.conf ; fi
@echo -e "\n\nTo manually start smartd on bootup, run /etc/rc.d/init.d/smartd start"
@echo "To automatically start smartd on bootup, run /sbin/chkconfig --add smartd"
@echo -e "\n\nSmartd can now use a configuration file /etc/smartd.conf. Do:\nman 8 smartd\n."
@echo -e "A sample configuration file may be found in /usr/share/doc/smartmontools-5.0 and /etc/smartd.conf.example/\n\n"
# perhaps for consistency I should also have $(DESTDIR) for the uninstall...
uninstall:
rm -f /usr/share/man/man8/smartctl.8 /usr/share/man/man8/smartd.8 /usr/sbin/smartctl \
/usr/share/man/man8/smartctl.8.gz /usr/share/man/man8/smartd.8.gz \
/usr/share/man/man5/smartd.conf.5.gz /usr/sbin/smartd
rm -rf /usr/share/doc/smartmontools-5.0/
if [ -f /var/lock/subsys/smartd -a -f /etc/rc.d/init.d/smartd ] ; then /etc/rc.d/init.d/smartd stop ; fi
if [ -f /etc/rc.d/init.d/smartd ] ; then /sbin/chkconfig --del smartd ; fi
if [ -f /etc/rc.d/init.d/smartd ] ; then rm -f /etc/rc.d/init.d/smartd ; fi
if [ -f /etc/smartd.conf.example ] ; then rm -f /etc/smartd.conf.example ; fi
if [ -f /etc/smartd.conf ] ; then echo -e "\n\nWe have NOT REMOVED /etc/smartd.conf\n\n" ; fi
# All this mess is to automatically increment the release numbers.
# The number of the next release is kept in the file "VERSION"
release: smartd.conf.5
cat smartmontools.spec | sed '/Release:/d' > temp.spec
echo "Release: " $(counter) > temp.version
cat temp.version temp.spec > smartmontools.spec
rm -f temp.spec temp.version
. cvs-script && cvs commit -m "release $(counter)"
. cvs-script && cvs tag -d "RELEASE_5_0_$(counter)" && cvs tag "RELEASE_5_0_$(counter)"
rm -rf $(pkgname) mkdir $(pkgname)
cp -a $(releasefiles) $(pkgname)
tar zcvf $(pkgname).tar.gz $(pkgname)
mv -f $(pkgname) $(pkgname2)
tar zcvf $(pkgname2).tar.gz $(pkgname2)
rm -rf $(pkgname2)
mv -f $(pkgname).tar.gz /usr/src/redhat/SOURCES/
rpm -ba smartmontools.spec
mv /usr/src/redhat/RPMS/i386/$(pkgname)*.rpm .
mv /usr/src/redhat/SRPMS/$(pkgname)*rpm .
rm -f /usr/src/redhat/SOURCES/$(pkgname).tar.gz
echo `hostname` | grep -q ballen && echo $(newcounter) > VERSION && chown ballen.ballen *