Select Git revision
pykat_output.kat
-
Daniel Brown authoredDaniel Brown authored
Makefile.am 16.50 KiB
## Process this file with automake to produce Makefile.in
#
# $Id: Makefile.am,v 1.81 2007/04/01 16:49:44 shattered Exp $
#
@SET_MAKE@
# Make sure .cpp takes precedence to avoid compiling old .c file
SUFFIXES = .cpp .c .s .o
AM_CPPFLAGS = -DSMARTMONTOOLS_SYSCONFDIR=\"$(sysconfdir)\"
sbin_PROGRAMS = smartd \
smartctl
smartd_SOURCES = smartd.cpp \
smartd.h \
atacmdnames.cpp \
atacmdnames.h \
atacmds.cpp \
atacmds.h \
ataprint.cpp \
ataprint.h \
extern.h \
int64.h \
knowndrives.cpp \
knowndrives.h \
scsicmds.cpp \
scsicmds.h \
scsiata.cpp \
scsiata.h \
scsiprint.cpp \
scsiprint.h \
utility.cpp \
utility.h
smartd_LDADD = @os_deps@ @os_libs@
smartd_DEPENDENCIES = @os_deps@
EXTRA_smartd_SOURCES = os_darwin.cpp \
os_darwin.h \
os_linux.cpp \
os_linux.h \
os_freebsd.cpp \
os_freebsd.h \
os_netbsd.cpp \
os_netbsd.h \
os_openbsd.cpp \
os_openbsd.h \
os_solaris.cpp \
os_solaris.h \
os_solaris_ata.s \
os_win32.cpp \
os_generic.cpp \
os_generic.h \
cciss.cpp \
cciss.h
if OS_WIN32_MINGW
smartd_SOURCES += \
posix/regex.h \
posix/regex.c \
os_win32/daemon_win32.h \
os_win32/daemon_win32.cpp \
os_win32/hostname_win32.h \
os_win32/hostname_win32.cpp \
os_win32/syslog.h \ os_win32/syslog_win32.cpp
# Included by regex.c:
EXTRA_smartd_SOURCES += \
posix/regcomp.c \
posix/regexec.c \
posix/regex_internal.c \
posix/regex_internal.h
endif
smartctl_SOURCES= smartctl.cpp \
smartctl.h \
atacmdnames.cpp \
atacmdnames.h \
atacmds.cpp \
atacmds.h \
ataprint.cpp \
ataprint.h \
extern.h \
int64.h \
knowndrives.cpp \
knowndrives.h \
scsicmds.cpp \
scsicmds.h \
scsiata.cpp \
scsiata.h \
scsiprint.cpp \
scsiprint.h \
utility.cpp \
utility.h
smartctl_LDADD = @os_deps@ @os_libs@
smartctl_DEPENDENCIES = @os_deps@
EXTRA_smartctl_SOURCES = os_linux.cpp \
os_linux.h \
os_freebsd.cpp \
os_freebsd.h \
os_netbsd.cpp \
os_netbsd.h \
os_openbsd.cpp \
os_openbsd.h \
os_solaris.cpp \
os_solaris.h \
os_win32.cpp \
os_generic.cpp \
os_generic.h \
cciss.cpp \
cciss.h
if OS_WIN32_MINGW
smartctl_SOURCES += \
posix/regex.h \
posix/regex.c \
os_win32/syslog.h
# Included by regex.c:
EXTRA_smartctl_SOURCES += \
posix/regcomp.c \
posix/regexec.c \
posix/regex_internal.c \
posix/regex_internal.h
endif
if OS_SOLARIS
# This block is required because Solaris uses manual page section 1m
# for administrative command (linux/freebsd use section 8) and Solaris# uses manual page section 4 for file formats (linux/freebsd use
# section 5). Automake can deal cleanly with man page sections 1-8
# and n, but NOT with sections of the form 1m.
extra_MANS = smartd.conf.4 \
smartctl.1m \
smartd.1m
install-man: $(extra_MANS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(mandir)/man4
$(mkinstalldirs) $(DESTDIR)$(mandir)/man1m
for i in $(extra_MANS); do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) $$file $(DESTDIR)$(mandir)/man$$ext/$$inst"; \
$(INSTALL_DATA) $$file $(DESTDIR)$(mandir)/man$$ext/$$inst; \
done
uninstall-man:
@$(NORMAL_UNINSTALL)
for i in $(extra_MANS); do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f $(DESTDIR)$(mandir)/man$$ext/$$inst"; \
rm -f $(DESTDIR)$(mandir)/man$$ext/$$inst; \
done
%.1m: %.8
awk '/^.TH/ {$$3="1m"} {print}' < $< | \
sed -e 's/smartd\.conf\(.*\)(5)/smartd.conf\1(4)/g' \
-e 's/syslog\.conf\(.*\)(5)/syslog.conf\1(4)/g' \
-e 's/smartctl\(.*\)(8)/smartctl\1(1m)/g' \
-e 's/syslogd\(.*\)(8)/syslogd\1(1m)/g' \
-e 's|/var/log/messages|/var/adm/messages|g' \
-e 's/smartd\(.*\)(8)/smartd\1(1m)/g' > $@
%.4: %.5
awk '/^.TH/ {$$3="4"} {print}' < $< | \
sed -e 's/smartd\.conf\(.*\)(5)/smartd.conf\1(4)/g' \
-e 's/syslog\.conf\(.*\)(5)/syslog.conf\1(4)/g' \
-e 's/smartctl\(.*\)(8)/smartdctl\1(1m)/g' \
-e 's/syslogd\(.*\)(8)/syslogd\1(1m)/g' \
-e 's|/var/log/messages|/var/adm/messages|g' \
-e 's/smartd\(.*\)(8)/smartd\1(1m)/g' > $@
else
# For systems that adopts traditional manner
man_MANS = smartd.conf.5 \
smartctl.8 \
smartd.8
endif
docsdir=$(docdir)
docs_DATA = AUTHORS \
CHANGELOG \
COPYING \
INSTALL \
NEWS \
README \
TODO \
WARNINGS \
smartd.conf
sysconf_DATA = smartd.conf$(smartd_suffix)
if SMARTD_SUFFIX
smartd.conf$(smartd_suffix): smartd.conf cp ${srcdir}/smartd.conf smartd.conf$(smartd_suffix)
endif
EXTRA_DIST = smartmontools.spec \
smartd.initd.in \
smartd.8.in \
smartctl.8.in \
smartd.conf.5.in \
smartd.conf \
autogen.sh \
os_darwin/SMART.in \
os_darwin/StartupParameters.plist \
os_darwin/English_Localizable.strings \
os_win32/installer.nsi \
$(docs_DATA)
CLEANFILES = smartd.conf.5 \
smartd.conf.4 \
smartd.8 \
smartd.1m \
smartd.8.html \
smartd.8.txt \
smartctl.8 \
smartctl.1m \
smartctl.8.html \
smartctl.8.txt \
smartd.conf.5.html \
smartd.conf.5.txt \
smartd.initd \
SMART
if SMARTD_SUFFIX
CLEANFILES += smartd.conf$(smartd_suffix)
endif
smartd.conf.5.in: smartd.8.in
sed '1,/STARTINCLUDE/ D;/ENDINCLUDE/,$$D' < $(srcdir)/smartd.8.in > $(top_builddir)/tmp.directives
sed '/STARTINCLUDE/,$$D' < $(srcdir)/smartd.conf.5.in > $(top_builddir)/tmp.head
sed '1,/ENDINCLUDE/D' < $(srcdir)/smartd.conf.5.in > $(top_builddir)/tmp.tail
cat $(top_builddir)/tmp.head > $(srcdir)/smartd.conf.5.in
echo '.\" STARTINCLUDE' >> $(srcdir)/smartd.conf.5.in
cat $(top_builddir)/tmp.directives >> $(srcdir)/smartd.conf.5.in
echo '.\" ENDINCLUDE' >> $(srcdir)/smartd.conf.5.in
cat $(top_builddir)/tmp.tail >> $(srcdir)/smartd.conf.5.in
rm -f $(top_builddir)/tmp.head $(top_builddir)/tmp.tail $(top_builddir)/tmp.directives
if OS_DARWIN
initd_DATA = SMART \
os_darwin/StartupParameters.plist \
os_darwin/English_Localizable.strings
initd_install_name = SMART
initd_DATA_install = install-initdDATA-darwin
SMART : os_darwin/SMART.in
sed "s|/usr/sbin/|$(sbindir)/|" $< > $@
install-initdDATA-darwin: $(initd_DATA)
$(mkinstalldirs) $(DESTDIR)$(initddir)
$(mkinstalldirs) $(DESTDIR)$(initddir)/SMART
$(mkinstalldirs) $(DESTDIR)$(initddir)/SMART/Resources
$(INSTALL_SCRIPT) $(top_builddir)/SMART $(DESTDIR)$(initddir)/SMART
$(INSTALL_DATA) $(srcdir)/os_darwin/StartupParameters.plist \
$(DESTDIR)$(initddir)/SMART/StartupParameters.plist
for i in English ; do \
RDIR=$(DESTDIR)$(initddir)/SMART/Resources/$${i}.lproj ; \
$(mkinstalldirs) $$RDIR ;\
$(INSTALL_DATA) $(srcdir)/os_darwin/$${i}_Localizable.strings \ $$RDIR/Localizable.strings ; \
done
@echo -e "\n\n####################################################################\n#"
@echo -e "# PLEASE READ THIS BOX!\n#"
@echo -e "# To manually start the smartd daemon, run:\n# ${initddir}/SMART/SMART start\n#"
@echo -e "# To automatically start smartd on bootup, add the line:\n# SMARTd=-YES-\n# to /etc/hostconfig\n#"
@echo -e "# smartd can now use a configuration file ${sysconfdir}/smartd.conf. Do:\n# man smartd"
@echo -e "# to learn about it. A sample configuration file can be found in:\n# ${docdir}\n#"
@echo -e "####################################################################\n\n"
else
initd_DATA = smartd.initd
smartd.initd: $(srcdir)/smartd.initd.in Makefile
sed "s|/usr/local/sbin/|$(sbindir)/|g" $(srcdir)/smartd.initd.in > $@
initd_install_name = smartd$(smartd_suffix)
initd_DATA_install = install-initdDATA-generic
install-initdDATA-generic: $(initd_DATA)
$(mkinstalldirs) $(DESTDIR)$(initddir)
$(INSTALL_SCRIPT) $(top_builddir)/smartd.initd $(DESTDIR)$(initddir)/smartd$(smartd_suffix)
@echo -e "\n\n####################################################################\n#"
@echo -e "# PLEASE READ THIS BOX!\n#"
@echo -e "# To manually start the smartd daemon, run:\n# ${initddir}/smartd start\n#"
@echo -e "# To automatically start smartd on bootup, run:\n# /sbin/chkconfig --add smartd\n#"
@echo -e "# smartd can now use a configuration file ${sysconfdir}/smartd.conf. Do:\n# man smartd"
@echo -e "# to learn about it. A sample configuration file can be found in:\n# ${docdir}\n#"
@echo -e "####################################################################\n\n"
endif
install-initdDATA : $(initd_DATA_install)
uninstall-initdDATA:
rm -rf $(DESTDIR)$(initddir)/$(initd_install_name)
uninstall-docsDATA:
rm -rf $(DESTDIR)$(docsdir)
smart%: $(srcdir)/smart%.in Makefile
sed "s|CURRENT_CVS_VERSION|$(releaseversion)|g" $< | \
sed "s|CURRENT_CVS_DATE|$(smartmontools_release_date)|g" | \
sed "s|CURRENT_CVS_TIME|$(smartmontools_release_time)|g" | \
sed "s|/usr/local/share/man/|$(mandir)/|g" | \
sed "s|/usr/local/sbin/|$(sbindir)/|g" | \
sed "s|/usr/local/etc/rc\\.d/init.d/|$(initddir)/|g" | \
sed "s|/usr/local/share/doc/smartmontools-5.1/|$(docsdir)/|g" | \
sed "s|/usr/local/etc/smartd\\.conf|$(sysconfdir)/smartd.conf|g" > $@
# Commands to convert man pages into .html and .txt
# TODO: configure
MAN2HTML = man2html
#MAN2HTML = groff -man -Thtml
MAN2TXT = groff -man -Tascii -P'-bcou'
# Remove HTTP header and fix links in man2html output
FIXHTML = sed '1s,^Content-type.*,,' \
| sed 's,<A HREF="http://[-a-z/]*/man2html?\([1-8]\)+\(smart[cd][.a-z]*\)">,<A HREF="\2.\1.html">,g' \
| sed 's,<A HREF="http://[-a-z/]*/man2html">,<A HREF=".">,g' \
| sed 's,<A HREF="http://[-a-z/]*/man2html?[^"]*">\([^<]*\)</A>,\1,g' \
| sed 's,<A HREF="mailto:[^s][^m][^a][^"]*">\([^<]*\)</A>,\1,g'
# Convert man pages into .html and .txt
htmlman: smartctl.8.html smartd.8.html smartd.conf.5.html
txtman: smartctl.8.txt smartd.8.txt smartd.conf.5.txt
if OS_WIN32_MINGW
%.5.html: %.5
$(DOS2UNIX) < $< | $(MAN2HTML) | $(FIXHTML) > $@
%.8.html: %.8
$(DOS2UNIX) < $< | $(MAN2HTML) | $(FIXHTML) > $@
else
%.5.html: %.5
$(MAN2HTML) $< | $(FIXHTML) > $@
%.8.html: %.8
$(MAN2HTML) $< | $(FIXHTML) > $@
endif
%.5.txt: %.5
$(MAN2TXT) $< > $@
%.8.txt: %.8
$(MAN2TXT) $< > $@
if OS_WIN32_MINGW
# Definitions for Windows distribution
distdir_win32 = $(PACKAGE)-$(VERSION).win32
distzip_win32 = $(PACKAGE)-$(VERSION).win32.zip
distinst_win32= $(PACKAGE)-$(VERSION).win32-setup.exe
exedir_win32 = $(distdir_win32)/bin
docdir_win32 = $(distdir_win32)/doc
FILES_WIN32 = $(exedir_win32)/smartctl.exe \
$(exedir_win32)/smartd.exe \
$(docdir_win32)/AUTHORS.txt \
$(docdir_win32)/CHANGELOG.txt \
$(docdir_win32)/COPYING.txt \
$(docdir_win32)/INSTALL.txt \
$(docdir_win32)/NEWS.txt \
$(docdir_win32)/README.txt \
$(docdir_win32)/TODO.txt \
$(docdir_win32)/WARNINGS.txt \
$(docdir_win32)/smartd.conf \
$(docdir_win32)/smartctl.8.html \
$(docdir_win32)/smartctl.8.txt \
$(docdir_win32)/smartd.8.html \
$(docdir_win32)/smartd.8.txt \
$(docdir_win32)/smartd.conf.5.html \
$(docdir_win32)/smartd.conf.5.txt
CLEANFILES += $(FILES_WIN32) $(exedir_win32)/syslogevt.exe distdir.mkdir syslogevt.check
# Textfile converter from cygutils
UNIX2DOS = unix2dos -D
DOS2UNIX = dos2unix -U
# Build Windows distribution
dist-win32: $(distzip_win32)
install-win32: $(distinst_win32)
./$(distinst_win32)
installer-win32: $(distinst_win32)
distdir-win32: distdir.mkdir $(FILES_WIN32) syslogevt.check
$(distzip_win32): distdir.mkdir $(FILES_WIN32) syslogevt.check
@rm -fv $(distzip_win32)
cd $(distdir_win32) && zip -9Dr ../$(distzip_win32) .
# Build NSIS installer, try to locate makensis in default location first
$(distinst_win32): $(srcdir)/os_win32/installer.nsi distdir.mkdir $(FILES_WIN32) syslogevt.check
@makensis="$(MAKENSIS)"; if [ -z "$$makensis" ]; then \
if [ ! -z "$$PROGRAMFILES" ] && "$$PROGRAMFILES/NSIS/makensis" /VERSION >/dev/null 2>&1; then \
makensis="$$PROGRAMFILES/NSIS/makensis"; \
elif makensis /VERSION >/dev/null 2>&1; then \
makensis=makensis; \
else \
echo 'makensis: command not found. Please download and install NSIS' 1>&2; \
echo 'from http://nsis.sourceforge.net/Download' 1>&2; exit 1; \
fi; \
fi; \
echo "$$makensis /V2 /NOCD /DINPDIR=$(distdir_win32) /DOUTFILE=$(distinst_win32) $(srcdir)/os_win32/installer.nsi"; \
"$$makensis" /V2 /NOCD /DINPDIR="$(distdir_win32)" /DOUTFILE="$(distinst_win32)" "$(srcdir)/os_win32/installer.nsi"
cleandist-win32:
rm -rf $(distdir_win32) distdir.mkdir syslogevt.check
distdir.mkdir:
@test -d $(exedir_win32) || mkdir -pv $(exedir_win32)
@test -d $(docdir_win32) || mkdir -pv $(docdir_win32)
touch $@
syslogevt.check:
@if [ -f $(srcdir)/os_win32/syslogevt.exe ]; then \
cp -pv $(srcdir)/os_win32/syslogevt.exe $(exedir_win32)/syslogevt.exe; \
else echo "Warning: $(srcdir)/os_win32/syslogevt.exe missing."; fi
touch $@
$(exedir_win32)/%.exe: %.exe
cp -p $< $@
strip -s $@
touch -r $< $@
$(docdir_win32)/%.html: %.html
$(UNIX2DOS) < $< > $@
touch -r $< $@
$(docdir_win32)/%.txt: %.txt
$(UNIX2DOS) < $< > $@
touch -r $< $@
$(docdir_win32)/%.txt: $(srcdir)/%
$(UNIX2DOS) < $< > $@
touch -r $< $@
$(docdir_win32)/%.conf: $(srcdir)/%.conf
$(UNIX2DOS) < $< > $@
touch -r $< $@
# Build config_vc6.h for MSVC 6 from MinGW config.h
config-vc6: $(srcdir)/os_win32/config_vc6.h
$(srcdir)/os_win32/config_vc6.h: config.h
sed '1i/* config_vc6.h. Generated by Makefile. */' $< | \
sed 's,^#define HAVE_\(ATTR_PACKED\|INTTYPES_H\|STDINT_H\|STRINGS_H\|STRTOULL\|U*INT64_T\|UNISTD_H\) 1$$,/* #undef HAVE_\1 */,' | \
sed 's,i.86-pc-mingw32,i686-pc-win32vc6,' > $@
endif
SUBDIRS= . examplescripts