This commit was manufactured by cvs2svn to create tag 'OPENBSD_OK'.

git-svn-id: https://smartmontools.svn.sourceforge.net/svnroot/smartmontools/tags/OPENBSD_OK@2264 4ea69e1a-61f1-4043-bf83-b5c94c648137

www/3w-xxxx.txt

----------------------------------------------------------------------------
-# November 27, 2003
-#
-# This patch is now against the official 3ware version 1.02.00.036 3w-xxxx.c driver
-# dated Wed Jul 16 20:30:28 2003. Instructions for use:
-# 
-# [1] download the 1.02.00.036 3w-xxxx.c driver from 
-#     http://www.3ware.com/support/download.asp
-#
-# [2] Unpack it:
-#       tar zxvf rh7x_8x.tgz (or su7x_8x.tgz for SuSE)
-#
-# [3] Unpack the source code, and move to the right directory:
-#       cd src/2.4
-#       tar zxvf 3w-xxxx.tgz
-#       cd driver
-#
-# [4] Copy THIS FILE (what you are reading!) into that
-#     directory and name it 3w-xxxx.txt
-#
-# [5] Patch the driver:
-#       patch < 3w-xxxx.txt
-#     You should get the response 'patching file 3w-xxxx.c'.
-#
-# [6] Build the driver with the command:
-#       make
-#     This will create the driver: a file named 3w-xxxx.o
-#
-# [7] Load the driver (you must be root to do this):
-#       /sbin/insmod ./3w-xxxx.o
-#     [Note: if '/sbin/lsmod' shows that the driver is loaded already,
-#     then unmount any file systems that use it, then unload the driver
-#     with '/sbin/rmmod 3w-xxxx' first!]
-#
-# [8] Copy the driver into place in the kernel tree:
-#       cp ./3w-xxxx.o /lib/modules/`uname -r`/kernel/drivers/scsi
-#     That's it!
-#
-# August 14, 2003
-#
-# Adam Radford has incorporated a change that now allows the 3w-xxxx
-# driver to return the Cylinder Low/High values.  These are needed to
-# get the SMART health status.  This patch incorporates those changes
-# as well.
-#
-# August 12, 2003
-#
-# 3ware has incorporated a more general version of this fix into their latest
-# 3w-xxxx driver release. Rather than using this patch, you can upgrade your 
-# 3w-xxxx driver to version 1.02.00.037 or greater.  Or you can use this patch.
-#
-# August 8, 2003
-# PATCH FOR 3WARE 3w-xxxx DRIVER
-# Bruce Allen ballen at gravity.phys.uwm.edu
-# CVS ID of this file: $Id: 3w-xxxx.txt,v 1.5 2003/11/28 17:58:50 ballen4705 Exp $
-# 
-# To apply this patch, save this entire file to 3w-xxxx.txt in a
-# directory containing the original unpatched 3w-xxxx.c file. Then
-# given the command:
-#                     patch < 3w-xxxx.txt
-# That's it!
-#
-# TECHNICAL EXPLANATION OF THE PATCH FOLLOWS.  SKIP IT IF YOU DON'T CARE.
-#
-# The 3w-xxxx SCSI RAID driver for 3ware Escalade controller cards has a bug
-# in the "passthru" ioctl() which prevents two SMART commands from being
-# passed to the ATA devices behind the controller. The commands are:
-# 
-#  SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE 
-#  (Command Register=0xB0/Feature Register=0xD2)
-# 
-#  SMART ENABLE/DISABLE AUTOMATIC OFF-LINE
-#  (Command Register=0xB0/Feature Register=0xDB)
-# 
-# [Note: the second of these commands is listed as "Obsolete" in the ATA
-# specifications.  It was originally defined in SFF-8035i.  Most vendors
-# (IBM/Hitachi, Maxtor, Samsung, WD, among others) still implement it for
-# backwards compatibility.]
-# 
-# The problem arises because in both cases (stupidly!) the ENABLE subcommand
-# is indicated with a nonzero value of the Sector Count Register.  For the
-# AUTOSAVE command one uses Sector Count Register=0xF1 and for the AUTOMATIC
-# OFF-LINE command one uses Sector Count Register=0xF8.
-# 
-# This provokes the following error messages from the 3w-xxxx driver:
-#   3w-xxxx: tw_ioctl(): Passthru size (123392) too big.
-#   3w-xxxx: tw_ioctl(): Passthru size (126976) too big.
-# and the driver doesn't pass the ATA command on.  This is because the
-# passthru part of the 3w-xxxx driver assumes that the value in the Sector
-# Count Register is the number of 512-byte blocks to transfer, and these
-# values exceed the internal buffer sizes.
-# 
-# In fact both of these are non-data commands, and so this is trivial to
-# fix.  I am attaching an 8-line patch for this purpose.  It looks for these
-# particular commands and then treats them as non-data commands. It has been
-# tested on both a 6800 and a 7500 controller, and should be endian-order
-# and 32/64-bit clean.
-# 
-# [Note: the normal linux ide drivers also assume that the Sector Count
-# Register is the number of 512-byte sectors to transfer to user space.  
-# But in that case the user can simply allocate a userland buffer large
-# enough to hold the 0xf1*0x200 or 0xf8*0x200 bytes, and then ignore the
-# contents.]
-#
-# -----------------------------------------------------------------------
-
---- 3w-xxxx.c.orig	Wed Jul 16 20:30:28 2003
-+++ 3w-xxxx.c	Thu Nov 27 11:20:25 2003
-@@ -173,6 +173,9 @@
-    1.02.00.035 - Improve tw_allocate_memory() memory allocation.
-                  Fix tw_chrdev_ioctl() to sleep correctly.
-    1.02.00.036 - Increase character ioctl timeout to 60 seconds.
-+   
-+   This version 1.02.00.036 3w-xxxx.c driver has been patched for full smartmontools support.
-+   
- */
- 
- #include <linux/module.h>
-@@ -1930,12 +1933,15 @@
- 			}
- 
- 			passthru = (TW_Passthru *)tw_dev->command_packet_virtual_address[request_id];
--			passthru->sg_list[0].length = passthru->sector_count*512;
--			if (passthru->sg_list[0].length > TW_MAX_PASSTHRU_BYTES) {
--				printk(KERN_WARNING "3w-xxxx: tw_ioctl(): Passthru size (%d) too big.\n", passthru->sg_list[0].length);
--				return 1;
-+			/* Don't load sg_list for non-data ATA cmds */
-+			if ((passthru->param != 0) && (passthru->param != 0x8)) {
-+				passthru->sg_list[0].length = passthru->sector_count*512;
-+				if (passthru->sg_list[0].length > TW_MAX_PASSTHRU_BYTES) {
-+					printk(KERN_WARNING "3w-xxxx: tw_ioctl(): Passthru size (%d) too big.\n", passthru->sg_list[0].length);
-+					return 1;
-+				}
-+				passthru->sg_list[0].address = tw_dev->alignment_physical_address[request_id];
- 			}
--			passthru->sg_list[0].address = tw_dev->alignment_physical_address[request_id];
- 			tw_post_command_packet(tw_dev, request_id);
- 			return 0;
- 		case TW_CMD_PACKET:
-@@ -2185,8 +2191,15 @@
- 	ioctl = (TW_Ioctl *)buff;
- 	switch (ioctl->opcode) {
- 		case TW_ATA_PASSTHRU:
--			passthru = (TW_Passthru *)ioctl->data;
--			memcpy(buff, tw_dev->alignment_virtual_address[request_id], passthru->sector_count * 512);
-+		        passthru = (TW_Passthru *)ioctl->data;
-+			/* Don't return data for non-data ATA cmds */
-+			if ((passthru->param != 0) && (passthru->param != 0x8))
-+				memcpy(buff, tw_dev->alignment_virtual_address[request_id], passthru->sector_count * 512);
-+			else {
-+			/* For non-data cmds, return cmd pkt */
-+				if (tw_dev->srb[request_id]->request_bufflen >= sizeof(TW_Command))
-+					memcpy(buff, tw_dev->command_packet_virtual_address[request_id], sizeof(TW_Command));
-+			}
- 			break;
- 		case TW_CMD_PACKET_WITH_DATA:
- 			dprintk(KERN_WARNING "3w-xxxx: tw_ioctl_complete(): caught TW_CMD_PACKET_WITH_DATA.\n");