This commit was manufactured by cvs2svn to create tag 'RELEASE_5_30'.

git-svn-id: https://smartmontools.svn.sourceforge.net/svnroot/smartmontools/tags/RELEASE_5_30@1573 4ea69e1a-61f1-4043-bf83-b5c94c648137

CVSROOT/checkoutlist

-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'

CVSROOT/commitinfo

-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/config

-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR

CVSROOT/cvswrappers

-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

CVSROOT/editinfo

-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

CVSROOT/loginfo

-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
-^sm5$ /cvsroot/sitedocs/CVSROOT/cvstools/syncmail -u %{sVv} smartmontools-cvs@lists.sourceforge.net
-^www$ /cvsroot/sitedocs/CVSROOT/cvstools/syncmail -u %{sVv} ballen4705@users.sourceforge.net

CVSROOT/modules

-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.

CVSROOT/notify

-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"

CVSROOT/rcsinfo

-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

sm5/atacmdnames.cpp

-/*
- * atacmdnames.c
- *
- * This module is based on the T13/1532D Volume 1 Revision 3 (ATA/ATAPI-7)
- * specification, which is available from http://www.t13.org/#FTP_site
- *
- * Home page of code is: http://smartmontools.sourceforge.net
- * Address of support mailing list: smartmontools-support@lists.sourceforge.net
- *
- * Copyright (C) 2003-4 Philip Williams
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "atacmdnames.h"
-#include <stdlib.h>
-#include <stdio.h>
-
-#define COMMAND_TABLE_SIZE 256
-
-const char *atacmdnames_c_cvsid="$Id: atacmdnames.cpp,v 1.11 2004/01/02 16:05:24 ballen4705 Exp $" ATACMDNAMES_H_CVSID;
-
-const char cmd_reserved[]        = "[RESERVED]";
-const char cmd_vendor_specific[] = "[VENDOR SPECIFIC]";
-const char cmd_reserved_sa[]     = "[RESERVED FOR SERIAL ATA]";
-const char cmd_reserved_cf[]     = "[RESERVED FOR COMPACTFLASH ASSOCIATION]";
-const char cmd_reserved_mcpt[]   = "[RESERVED FOR MEDIA CARD PASS THROUGH]";
-const char cmd_recalibrate_ret4[]= "RECALIBRATE [RET-4]";
-const char cmd_seek_ret4[]       = "SEEK [RET-4]";
-
-const char *command_table[COMMAND_TABLE_SIZE] = {
-/*-------------------------------------------------- 00h-0Fh -----*/
-  "NOP",
-  cmd_reserved,
-  cmd_reserved,
-  "CFA REQUEST EXTENDED ERROR CODE",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  "DEVICE RESET",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- 10h-1Fh -----*/
-  "RECALIBRATE [OBS-4]",
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-/*-------------------------------------------------- 20h-2Fh -----*/
-  "READ SECTOR(S)",
-  "READ SECTOR(S) [OBS-5]",
-  "READ LONG (w/ retry) [OBS-4]",
-  "READ LONG (w/o retry) [OBS-4]",
-  "READ SECTOR(S) EXT",
-  "READ DMA EXT",
-  "READ DMA QUEUED EXT",
-  "READ NATIVE MAX ADDRESS EXT",
-  cmd_reserved,
-  "READ MULTIPLE EXT",
-  "READ STREAM DMA",
-  "READ STREAM PIO",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  "READ LOG EXT",
-/*-------------------------------------------------- 30h-3Fh -----*/
-  "WRITE SECTOR(S)",
-  "WRITE SECTOR(S) [OBS-5]",
-  "WRITE LONG(w/ retry) [OBS-4]",
-  "WRITE LONG(w/o retry) [OBS-4]",
-  "WRITE SECTORS(S) EXT",
-  "WRITE DMA EXT",
-  "WRITE DMA QUEUED EXT",
-  "SET MAX ADDRESS EXT",
-  "CFA WRITE SECTORS WITHOUT ERASE",
-  "WRITE MULTIPLE EXT",
-  "WRITE STREAM DMA",
-  "WRITE STREAM PIO",
-  "WRITE VERIFY [OBS-4]",
-  "WRITE DMA FUA EXT",
-  "WRITE DMA QUEUED FUA EXT",
-  "WRITE LOG EXT",
-/*-------------------------------------------------- 40h-4Fh -----*/
-  "READ VERIFY SECTOR(S)",
-  "READ VERIFY SECTOR(S) [OBS-5]",
-  "READ VERIFY SECTOR(S) EXT",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- 50h-5Fh -----*/
-  "FORMAT TRACK [OBS-4]",
-  "CONFIGURE STREAM",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- 60h-6Fh -----*/
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- 70h-7Fh -----*/
-  "SEEK [OBS-7]",
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-/*-------------------------------------------------- 80h-8Fh -----*/
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  "CFA TRANSLATE SECTOR [VS IF NO CFA]",
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-/*-------------------------------------------------- 90h-9Fh -----*/
-  "EXECUTE DEVICE DIAGNOSTIC",
-  "INITIALIZE DEVICE PARAMETERS [OBS-6]",
-  "DOWNLOAD MICROCODE",
-  cmd_reserved,
-  "STANDBY IMMEDIATE [RET-4]",
-  "IDLE IMMEDIATE [RET-4]",
-  "STANDBY [RET-4]",
-  "IDLE [RET-4]",
-  "CHECK POWER MODE [RET-4]",
-  "SLEEP [RET-4]",
-  cmd_vendor_specific,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- A0h-AFh -----*/
-  "PACKET",
-  "IDENTIFY PACKET DEVICE",
-  "SERVICE",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- B0h-BFh -----*/
-  "SMART",
-  "DEVICE CONFIGURATION",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-/*-------------------------------------------------- C0h-CFh -----*/
-  "CFA ERASE SECTORS [VS IF NO CFA]",
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  "READ MULTIPLE",
-  "WRITE MULTIPLE",
-  "SET MULTIPLE MODE",
-  "READ DMA QUEUED",
-  "READ DMA",
-  "READ DMA [OBS-5]",
-  "WRITE DMA",
-  "WRITE DMA [OBS-5]",
-  "WRITE DMA QUEUED",
-  "CFA WRITE MULTIPLE WITHOUT ERASE",
-  "WRITE MULTIPLE FUA EXT",
-  cmd_reserved,
-/*-------------------------------------------------- D0h-DFh -----*/
-  cmd_reserved,
-  "CHECK MEDIA CARD TYPE",
-  cmd_reserved_mcpt,
-  cmd_reserved_mcpt,
-  cmd_reserved_mcpt,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  "GET MEDIA STATUS",
-  "ACKNOWLEDGE MEDIA CHANGE [RET-4]",
-  "BOOT POST-BOOT [RET-4]",
-  "BOOT PRE-BOOT [RET-4]",
-  "MEDIA LOCK",
-  "MEDIA UNLOCK",
-/*-------------------------------------------------- E0h-EFh -----*/
-  "STANDBY IMMEDIATE",
-  "IDLE IMMEDIATE",
-  "STANDBY",
-  "IDLE",
-  "READ BUFFER",
-  "CHECK POWER MODE",
-  "SLEEP",
-  "FLUSH CACHE",
-  "WRITE BUFFER",
-  "WRITE SAME [RET-4]",  /* Warning!  This command is retired but the value of
-                            f_reg is used in look_up_ata_command().  If this
-                            command code is reclaimed in a future standard then
-                            be sure to update look_up_ata_command(). */
-  "FLUSH CACHE EXIT",
-  cmd_reserved,
-  "IDENTIFY DEVICE",
-  "MEDIA EJECT",
-  "IDENTIFY DEVICE DMA [OBS-4]",
-  "SET FEATURES",
-/*-------------------------------------------------- F0h-FFh -----*/
-  cmd_vendor_specific,
-  "SECURITY SET PASSWORD",
-  "SECURITY UNLOCK",
-  "SECURITY ERASE PREPARE",
-  "SECURITY ERASE UNIT",
-  "SECURITY FREEZE LOCK",
-  "SECURITY DISABLE PASSWORD",
-  cmd_vendor_specific,
-  "READ NATIVE MAX ADDRESS",
-  "SET MAX",
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific
-};
-
-/* Returns the name of the command (and possibly sub-command) with the given
-   command code and feature register values.   For most command codes this
-   simply returns the corresponding entry in the command_table array, but for
-   others the value of the feature register specifies a subcommand or
-   distinguishes commands. */
-const char *look_up_ata_command(unsigned char c_code, unsigned char f_reg) {
-
-  // check that command table not messed up.  The compiler will issue
-  // warnings if there are too many array elements, but won't issue
-  // warnings if there are not enough of them.
-  if (sizeof(command_table) != sizeof(char *)*COMMAND_TABLE_SIZE){
-    fprintf(stderr, 
-            "Problem in atacmdnames.c.  Command Table command_table[] does\n"
-            "not have %d entries!  It has %d entries. Please fix it.\n",
-            COMMAND_TABLE_SIZE, (int)(sizeof(command_table)/sizeof(char *)));
-    abort();
-  }
-
-  switch (c_code) {
-  case 0x00:  /* NOP */
-    switch (f_reg) {
-    case 0x00:
-      return "NOP [Abort queued commands]";
-    case 0x01:
-      return "NOP [Don't abort queued commands]";
-    default:
-      return "NOP [Reserved subcommand]";
-    }
-  case 0x92:  /* DOWNLOAD MICROCODE */
-    switch (f_reg) {
-    case 0x01:
-      return "DOWNLOAD MICROCODE [Temporary]";
-    case 0x07:
-      return "DOWNLOAD MICROCODE [Save]";
-    default:
-      return "DOWNLOAD MICROCODE [Reserved subcommand]";
-    }
-  case 0xB0:  /* SMART */
-    switch (f_reg) {
-    case 0xD0:
-      return "SMART READ DATA";
-    case 0xD1:
-      return "SMART READ ATTRIBUTE THRESHOLDS [OBS-4]";
-    case 0xD2:
-      return "SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE";
-    case 0xD3:
-      return "SMART SAVE ATTRIBUTE VALUES [OBS-6]";
-    case 0xD4:
-      return "SMART EXECUTE OFF-LINE IMMEDIATE";
-    case 0xD5:
-      return "SMART READ LOG";
-    case 0xD6:
-      return "SMART WRITE LOG";
-    case 0xD7:
-      return "SMART WRITE ATTRIBUTE THRESHOLDS [NS, OBS-4]";
-    case 0xD8:
-      return "SMART ENABLE OPERATIONS";
-    case 0xD9:
-      return "SMART DISABLE OPERATIONS";
-    case 0xDA:
-      return "SMART RETURN STATUS";
-    case 0xDB:
-      return "SMART EN/DISABLE AUTO OFFLINE [NS (SFF-8035i)]";
-    default:
-        if (f_reg >= 0xE0)
-          return "[Vendor specific SMART command]";
-        else
-          return "[Reserved SMART command]";
-    }
-  case 0xB1:  /* DEVICE CONFIGURATION */
-    switch (f_reg) {
-    case 0xC0:
-      return "DEVICE CONFIGURATION RESTORE";
-    case 0xC1:
-      return "DEVICE CONFIGURATION FREEZE LOCK";
-    case 0xC2:
-      return "DEVICE CONFIGURATION IDENTIFY";
-    case 0xC3:
-      return "DEVICE CONFIGURATION SET";
-    default:
-      return "DEVICE CONFIGURATION [Reserved command]";
-    }
-  case 0xE9:  /* WRITE SAME */
-    switch (f_reg) {
-    case 0x22:
-      return "WRITE SAME [Start specified] [RET-4]";
-    case 0xDD:
-      return "WRITE SAME [Start unspecified] [RET-4]";
-    default:
-      return "WRITE SAME [Invalid subcommand] [RET-4]";
-    } 
-  case 0xEF:  /* SET FEATURES */
-    switch (f_reg) {
-    case 0x01:
-      return "SET FEATURES [Enable 8-bit PIO]";
-    case 0x02:
-      return "SET FEATURES [Enable write cache]";
-    case 0x03:
-      return "SET FEATURES [Set transfer mode]";
-    case 0x04:
-      return "SET FEATURES [Enable auto DR] [OBS-4]";
-    case 0x05:
-      return "SET FEATURES [Enable APM]";
-    case 0x06:
-      return "SET FEATURES [Enable Pwr-Up In Standby]";
-    case 0x07:
-      return "SET FEATURES [Set device spin-up]";
-    case 0x09:
-      return "SET FEATURES [Reserved (address offset)]";
-    case 0x0A:
-      return "SET FEATURES [Enable CFA power mode 1]";
-    case 0x10:
-      return "SET FEATURES [Reserved for Serial ATA]";
-    case 0x20:
-      return "SET FEATURES [Set Time-ltd R/W WCT]";
-    case 0x21:
-      return "SET FEATURES [Set Time-ltd R/W EH]";
-    case 0x31:
-      return "SET FEATURES [Disable Media Status Notf]";
-    case 0x33:
-      return "SET FEATURES [Disable retry] [OBS-4]";
-    case 0x42:
-      return "SET FEATURES [Enable AAM]";
-    case 0x43:
-      return "SET FEATURES [Set Max Host I/F S Times]";
-    case 0x44:
-      return "SET FEATURES [Length of VS data] [OBS-4]";
-    case 0x54:
-      return "SET FEATURES [Set cache segs] [OBS-4]";
-    case 0x55:
-      return "SET FEATURES [Disable read look-ahead]";
-    case 0x5D:
-      return "SET FEATURES [Enable release interrupt]";
-    case 0x5E:
-      return "SET FEATURES [Enable SERVICE interrupt]";
-    case 0x66:
-      return "SET FEATURES [Disable revert defaults]";
-    case 0x77:
-      return "SET FEATURES [Disable ECC] [OBS-4]";
-    case 0x81:
-      return "SET FEATURES [Disable 8-bit PIO]";
-    case 0x82:
-      return "SET FEATURES [Disable write cache]";
-    case 0x84:
-      return "SET FEATURES [Disable auto DR] [OBS-4]";
-    case 0x85:
-      return "SET FEATURES [Disable APM]";
-    case 0x86:
-      return "SET FEATURES [Disable Pwr-Up In Standby]";
-    case 0x88:
-      return "SET FEATURES [Disable ECC] [OBS-4]";
-    case 0x89:
-      return "SET FEATURES [Reserved (address offset)]";
-    case 0x8A:
-      return "SET FEATURES [Disable CFA power mode 1]";
-    case 0x90:
-      return "SET FEATURES [Reserved for Serial ATA]";
-    case 0x95:
-      return "SET FEATURES [Enable Media Status Notf]";
-    case 0x99:
-      return "SET FEATURES [Enable retries] [OBS-4]";
-    case 0x9A:
-      return "SET FEATURES [Set max avg curr] [OBS-4]";
-    case 0xAA:
-      return "SET FEATURES [Enable read look-ahead]";
-    case 0xAB:
-      return "SET FEATURES [Set max prefetch] [OBS-4]";
-    case 0xBB:
-      return "SET FEATURES [4 bytes VS data] [OBS-4]";
-    case 0xC2:
-      return "SET FEATURES [Disable AAM]";
-    case 0xCC:
-      return "SET FEATURES [Enable revert to defaults]";
-    case 0xDD:
-      return "SET FEATURES [Disable release interrupt]";
-    case 0xDE:
-      return "SET FEATURES [Disable SERVICE interrupt]";
-    case 0xE0:
-      return "SET FEATURES [Obsolete subcommand]";
-    default:
-      if (f_reg >= 0xF0)
-        return "SET FEATURES [Reserved for CFA]";
-      else
-        return "SET FEATURES [Reserved subcommand]";
-    }
-  case 0xF9:  /* SET MAX */
-    switch (f_reg) {
-    case 0x00:
-      return "SET MAX ADDRESS [OBS-6]";
-    case 0x01:
-      return "SET MAX SET PASSWORD";
-    case 0x02:
-      return "SET MAX LOCK";
-    case 0x03:
-      return "SET MAX UNLOCK";
-    case 0x04:
-      return "SET MAX FREEZE LOCK";
-    default:
-      return "[Reserved SET MAX command]";
-    }
-  default:
-    return command_table[c_code];
-  }
-}