Rebuild from smartd.8.in 1.118

git-svn-id: https://smartmontools.svn.sourceforge.net/svnroot/smartmontools/trunk@2428 4ea69e1a-61f1-4043-bf83-b5c94c648137

sm5/smartd.conf.5.in

 .ig
 Copyright (C) 2002-7 Bruce Allen <smartmontools-support@lists.sourceforge.net>
 
-$Id: smartd.conf.5.in,v 1.84 2007/07/09 01:57:31 ballen4705 Exp $
+$Id: smartd.conf.5.in,v 1.85 2007/09/14 20:48:18 chrfranke Exp $
 
 This program is free software; you can redistribute it and/or modify it
 under the terms of the GNU General Public License as published by the Free
@@ -298,10 +298,10 @@ controllers (using the Marvell rather than libata driver).
 
 .I 3ware,N
 \- the device consists of one or more ATA disks connected to a 3ware
-RAID controller. The non-negative integer N (in the range from 0 to 23
+RAID controller. The non-negative integer N (in the range from 0 to 31
 inclusive) denotes which disk on the controller is monitored.  In log
 files and email messages this disk will be identified as 3ware_disk_XX
-with XX in the range from 00 to 23 inclusive.
+with XX in the range from 00 to 31 inclusive.
 
 This Directive may at first appear confusing, because the 3ware
 controller is a SCSI device (such as /dev/sda) and should be listed as
@@ -1353,4 +1353,4 @@ SEE ALSO:
 
 .SH
 CVS ID OF THIS PAGE:
-$Id: smartd.conf.5.in,v 1.84 2007/07/09 01:57:31 ballen4705 Exp $
+$Id: smartd.conf.5.in,v 1.85 2007/09/14 20:48:18 chrfranke Exp $