This commit was manufactured by cvs2svn to create tag

'RELEASE_5_0_40'.

git-svn-id: https://smartmontools.svn.sourceforge.net/svnroot/smartmontools/tags/RELEASE_5_0_40@255 4ea69e1a-61f1-4043-bf83-b5c94c648137

CVSROOT/checkoutlist

-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'

CVSROOT/commitinfo

-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/config

-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR

CVSROOT/cvswrappers

-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

CVSROOT/editinfo

-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

CVSROOT/loginfo

-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

CVSROOT/modules

-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.

CVSROOT/notify

-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"

CVSROOT/rcsinfo

-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

sm5/scsiprint.cpp

-/*
- * scsiprint.c
- *
- * Home page of code is: http://smartmontools.sourceforge.net
- *
- * Copyright (C) 2002 Bruce Allen <smartmontools-support@lists.sourceforge.net>
- * Copyright (C) 2000 Michael Cornwell <cornwell@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * This code was originally developed as a Senior Thesis by Michael Cornwell
- * at the Concurrent Systems Laboratory (now part of the Storage Systems
- * Research Center), Jack Baskin School of Engineering, University of
- * California, Santa Cruz. http://ssrc.soe.ucsc.edu/
- *
- */
-
-
-#include <stdio.h>
-#include <unistd.h>
-#include <string.h>
-#include <fcntl.h>
-#include <errno.h>
-
-#include "smartctl.h"
-#include "scsicmds.h"
-#include "scsiprint.h"
-#include "extern.h"
-
-#define GBUF_SIZE 65535
-
-const char* CVSid4="$Id: scsiprint.cpp,v 1.10 2002/10/28 23:46:59 ballen4705 Exp $"
-CVSID3 CVSID4 CVSID5 CVSID6;
-
-// control block which points to external global control variables
-extern atamainctrl *con;
-
-UINT8 gBuf[GBUF_SIZE];
-
-UINT8 gSmartPage = 0;
-UINT8 gTempPage = 0;
-UINT8 gSelfTestPage = 0;
-UINT8 gStartStopPage = 0;
-UINT8 gTapeAlertsPage = 0;
-
-
-
-
-
-void scsiGetSupportPages ( int device)
-{
-   int i;
-
-   if (logsense ( device , SUPPORT_LOG_PAGES, (UINT8 *) &gBuf) != 0)
-   {
-       perror ( "Log Sense failed"); 
-       exit (1);
-   } 
-
-   for ( i = 4; i < gBuf[3] + LOGPAGEHDRSIZE ; i++)
-   {
-      switch ( gBuf[i])
-      {
-         case TEMPERATURE_PAGE:
-            gTempPage = 1;
-            break;
-         case STARTSTOP_CYCLE_COUNTER_PAGE:
-            gStartStopPage = 1;
-            break;
-         case SELFTEST_RESULTS_PAGE:
-            gSelfTestPage = 1;
-            break;
-         case SMART_PAGE:
-            gSmartPage = 1;
-            break;
-         case TAPE_ALERTS_PAGE:
-            gTapeAlertsPage = 1;
-            break;
-         default:
-            break;
-
-       }
-   }
-}
-
-void scsiGetSmartData (int device)
-{
-
-   UINT8 returnvalue;
-   UINT8 currenttemp;
-   UINT8 triptemp;
-
-   if ( scsiCheckSmart(device, gSmartPage, 
-                       &returnvalue, &currenttemp, &triptemp ) != 0)
-   {
-      perror ( "scsiGetSmartData Failed");
-      exit (1);
-   }
-	
-   if ( returnvalue )
-      printf("S.M.A.R.T. Sense: (%02x) %s\n", (UINT8) returnvalue, 
-                scsiSmartGetSenseCode(returnvalue));
-   else
-      printf("S.M.A.R.T. Sense: Ok!\n");
-
-   if ( (currenttemp || triptemp) && !gTempPage)
-   {
-      printf("Current Drive Temperature:     %d C\n", currenttemp);
-      printf("Drive Trip Temperature:        %d C\n", triptemp);
-   }
-}
-
-
-void scsiGetTapeAlertsData (int device)
-{
-    unsigned short pagelength;
-    unsigned short parametercode;
-    int i;
-    int failure = 0;
-
-    if ( logsense( device, TAPE_ALERTS_PAGE, (UINT8 *) &gBuf) != 0)
-    {
-   	     perror ( "scsiGetSmartData Failed");
-	     exit (1);
-    }
-
-    if ( gBuf[0] != 0x2e )
-    {
-         printf("TapeAlerts Log Sense Failed\n");
-         exit(-1);
-    }
-
-    pagelength = (unsigned short) gBuf[2] << 8 | gBuf[3];
-
-    for ( i = 4; i < pagelength;i+=5 )
-    {
-        parametercode = (unsigned short) gBuf[i] << 8 | gBuf[i+1];
-
-        if (gBuf[i+4])
-        {
-           printf("Tape Alerts Error!!!\n%s\n",
-              scsiTapeAlertsTapeDevice(parametercode));
-           failure = 1; 
-        }          
-    }
-
-    if(!failure)
-      printf("No Tape Alerts Failure\n");
-
-}
-
-void scsiGetStartStopData ( int device)
-{
-    UINT32 currentStartStop;
-    UINT32 recommendedStartStop; 
-
-    if ( logsense( device, STARTSTOP_CYCLE_COUNTER_PAGE, (UINT8 *) &gBuf) != 0)
-    {
-   	     perror ( "scsiGetStartStopData Failed");
-	     exit (1);
-    }
-
-
-    if ( gBuf[0] != STARTSTOP_CYCLE_COUNTER_PAGE )
-    {
-         printf("StartStop Log Sense Failed\n");
-         exit(-1);
-    }
-
-
-    recommendedStartStop= (UINT32) gBuf[28]<< 24 | gBuf[29] << 8 |
-                                       gBuf[30] << 16 | gBuf[31];
-    currentStartStop= (UINT32) gBuf[36]<< 24 | gBuf[37] << 8 |
-                                       gBuf[38] << 16 | gBuf[39];
-
-    printf("Current start stop count:      %u times\n", currentStartStop);
-    printf("Recommended start stop count:  %u times\n", recommendedStartStop);
-} 
-
- 
-void scsiGetDriveInfo ( int device)
-{
-   char manufacturer[9];
-   char product[17];
-   char revision[5];
-
-   UINT8 smartsupport;
-	
-   if (stdinquiry ( device, (UINT8 *) &gBuf) != 0)
-   {
-      perror ( "Standard Inquiry failed");
-   }
-
-   memset ( &manufacturer, 0, 8);
-   manufacturer[8] = '\0';
-   strncpy ((char *) &manufacturer, (char *) &gBuf[8], 8);
- 
-   memset ( &product, 0, 16);
-   strncpy ((char *) &product, (char *) &gBuf[16], 16);
-   product[16] = '\0';
-	
-   memset ( &revision, 0, 4);
-   strncpy ((char *) &revision, (char *) &gBuf[32], 4);
-   revision[4] = '\0';
-   printf("Device: %s %s Version: %s\n", manufacturer, product, revision);
-	
-   if ( scsiSmartSupport( device, (UINT8 *) &smartsupport) != 0)
-   {
-      printf("Device does not support %s\n",(gBuf[0] & 0x1f)?
-                         "TapeAlerts": "S.M.A.R.T.");
-      exit (1);
-   }
-	
-   printf("Device supports %s and is %s\n%s\n", 
-            (gBuf[0] & 0x1f)? "TapeAlerts" : "S.M.A.R.T.",
-            (smartsupport & DEXCPT_ENABLE)? "Disable" : "Enabled",
-            (smartsupport & EWASC_ENABLE)? "Temperature Warning Enabled":
-		"Temperature Warning Disabled or Not Supported");
-
-}
-
-
-void scsiSmartEnable( int device)
-{
-	
-	/* Enable Exception Control */
-
-	if ( scsiSmartDEXCPTDisable(device) != 0)
-	{
-		exit (1);
-	}
-	printf("S.M.A.R.T. enabled\n");
-		
-
-	if (scsiSmartEWASCEnable(device) != 0)
-	{
-		printf("Temperature Warning not Supported\n");
-		
-	}
-	else
-	{
-		printf("Temperature Warning Enabled\n");
-		
-	}
-
-	return;
-
-}
-	
-
-void scsiSmartDisable (int device)
-{
-
-	if ( scsiSmartDEXCPTEnable(device) != 0)
-	{
-		exit (1);
-	}
-	printf("S.M.A.R.T. Disabled\n");
-		
-
-}
-
-void scsiPrintTemp (int device)
-{
-  UINT8 temp;
-  UINT8 trip;
-
-  if ( scsiGetTemp(device, &temp, &trip) != 0)
-  {
-   exit (1);
-  }
-  
-  printf("Current Drive Temperature:     %d C\n", temp);
-  printf("Drive Trip Temperature:        %d C\n", trip);
-
-
-}
-
-void scsiPrintStopStart ( int device )
-{
-/**
-  unsigned int css;
-
-  if ( scsiGetStartStop(device, unsigned int *css) != 0)
-  {
-   exit (1);
-  }
-  
-  printf ("Start Stop Count: %d\n", css);
-**/
-}
-
-void scsiPrintMain (int fd)
-{
-
-    if (con->driveinfo)
-	scsiGetDriveInfo(fd); 
-
-    if (con->smartenable) 
-	scsiSmartEnable(fd);
-
-    if (con->smartdisable)
-	scsiSmartDisable(fd);
-
-    if (con->checksmart)
-    {
-	scsiGetSupportPages (fd);
-        if(gTapeAlertsPage)
-          scsiGetTapeAlertsData (fd);
-       else
-        {
-           scsiGetSmartData(fd);
-           if(gTempPage)
-            scsiPrintTemp(fd);         
-           if(gStartStopPage)
-            scsiGetStartStopData (fd);
-        }
-    }	
-
-	
-    if ( con->smartexeoffimmediate )
-    {
-	if ( scsiSmartOfflineTest (fd) != 0) 
-	{
-          printf( "Smartctl: Smart Offline Failed\n");
-          exit(-1);
-	}
-	printf ("Drive Command Successful offline test has begun\n");
-
-        printf ("Use smartctl -%c to abort test\n", SMARTSELFTESTABORT);	
-			
-    }
-
-
-    if ( con->smartshortcapselftest )
-    {
-	if ( scsiSmartShortCapSelfTest (fd) != 0) 
-	{
-            printf( "Smartctl: Smart Short Self Test Failed\n");
-            exit(-1);
-	}
-	printf ("Drive Command Successful Short Self test has begun\n");
-        printf ("Use smartctl -%c to abort test\n", SMARTSELFTESTABORT);	
-   }
-
-   if ( con->smartshortselftest )
-   { 
-		
-      if ( scsiSmartShortSelfTest (fd) != 0) 
-      {
-	printf( "Smartctl: Smart Short Self Test Failed\n");
-	exit(-1);
-      }
-	printf ("Drive Command Successful Short Self test has begun\n");
-        printf ("Use smartctl -%c to abort test\n", SMARTSELFTESTABORT);
-   }
-	
-   if ( con->smartextendselftest )
-   {
-      if ( scsiSmartExtendSelfTest (fd) != 0) 
-      {
-	printf( "S.M.A.R.T. Extended Self Test Failed\n");
-	exit(-1);
-      }
-
-   printf ("Drive Command Successful Extended Self test has begun\n");
-   printf ("Use smartctl -%c to abort test\n", SMARTSELFTESTABORT);	
-   }
-	
-	if ( con->smartextendcapselftest )
-	{
-		
-		if ( scsiSmartExtendCapSelfTest (fd) != 0) 
-		{
-			printf( "S.M.A.R.T. Extended Self Test Failed\n");
-			exit(-1);
-		}
-		
-		printf ("Drive Command Successful Extended Self test has begun\n");
-        printf ("Use smartctl -%c to abort test\n", SMARTSELFTESTABORT);	
-	}
-
-	if ( con->smartselftestabort )
-	{
-		
-		if ( scsiSmartSelfTestAbort (fd) != 0) 
-		{
-			printf( "S.M.A.R.T. Self Test Abort Failed\n");
-			exit(-1);
-		}
-		
-		printf ("Drive Command Successful self test aborted\n");
-     }		
-}

sm5/smartctl.cpp

-/*
- * smartctl.c
- *
- * Home page of code is: http://smartmontools.sourceforge.net
- *
- * Copyright (C) 2002 Bruce Allen <smartmontools-support@lists.sourceforge.net>
- * Copyright (C) 2000 Michael Cornwell <cornwell@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * This code was originally developed as a Senior Thesis by Michael Cornwell
- * at the Concurrent Systems Laboratory (now part of the Storage Systems
- * Research Center), Jack Baskin School of Engineering, University of
- * California, Santa Cruz. http://ssrc.soe.ucsc.edu/
- *
- */
-
-
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/ioctl.h>
-#include <linux/hdreg.h>
-#include <sys/fcntl.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdarg.h>
-#include "smartctl.h"
-#include "atacmds.h"
-#include "ataprint.h"
-#include "scsicmds.h"
-#include "scsiprint.h"
-#include "extern.h"
-
-extern const char *CVSid1, *CVSid2, *CVSid3, *CVSid4; 
-const char* CVSid5="$Id: smartctl.cpp,v 1.27 2002/11/07 19:07:20 ballen4705 Exp $"
-CVSID1 CVSID2 CVSID3 CVSID4 CVSID5 CVSID6;
-
-// This is a block containing all the "control variables".  We declare
-// this globally in this file, and externally in other files.
-atamainctrl *con=NULL;
-
-void printslogan(){
-  pout("smartctl version %d.%d-%d Copyright (C) 2002 Bruce Allen\n",
-      (int)RELEASE_MAJOR, (int)RELEASE_MINOR, (int)SMARTMONTOOLS_VERSION);
-  pout("Home page is %s\n\n",PROJECTHOME);
-  return;
-}
-
-
-void printcopy(){
-  char out[CVSMAXLEN];
-  pout("smartctl comes with ABSOLUTELY NO WARRANTY. This\n");
-  pout("is free software, and you are welcome to redistribute it\n");
-  pout("under the terms of the GNU General Public License Version 2.\n");
-  pout("See http://www.gnu.org for further details.\n\n");
-  pout("CVS version IDs of files used to build this code are:\n");
-  printone(out,CVSid1);
-  pout("%s",out);
-  printone(out,CVSid2);
-  pout("%s",out);
-  printone(out,CVSid3);
-  pout("%s",out);
-  printone(out,CVSid4);
-  pout("%s",out);
-  printone(out,CVSid5);
-  pout("%s",out);
-  return;
-}
-
-/*  void prints help information for command syntax */
-void Usage ( void){
-  printf("Usage: smartctl -[options] [device]\n");
-  printf("\nShow Information Options:\n");
-  printf("  %c  Show Version, Copyright and License info\n", PRINTCOPYLEFT);
-  printf("  %c  Show SMART Drive Info                   (ATA/SCSI)\n",DRIVEINFO);
-  printf("  %c  Show all SMART Information              (ATA/SCSI)\n",SMARTVERBOSEALL);
-  printf("\nRun-time Behavior Options:\n");
-  printf("  %c  Quiet: only show SMART Drive Errors     (ATA Only)\n",    QUIETMODE);
-  printf("  %c  Very Quiet: no display, use Exit Status (ATA Only)\n",    VERYQUIETMODE);  
-  printf("  %c  Device is an ATA Device                 (ATA Only)\n",    NOTSCSIDEVICE);
-  printf("  %c  Device is a SCSI Device                 (SCSI Only)\n",   NOTATADEVICE);
-  printf("  %c  Permissive: continue on Mandatory fails (ATA Only)\n",    PERMISSIVE);
-  printf("  %c  Conservative: exit if Optional Cmd fail (ATA Only)\n",    ULTRACONSERVATIVE);  
-  printf("  %c  Warning: exit if Struct Checksum bad    (ATA Only)\n",    EXITCHECKSUMERROR);
-  printf("\nSMART Feature Enable/Disable Commands:\n");
-  printf("  %c  Enable  SMART data collection           (ATA/SCSI)\n",    SMARTENABLE);
-  printf("  %c  Disable SMART data collection           (ATA/SCSI)\n",    SMARTDISABLE);
-  printf("  %c  Enable  SMART Automatic Offline Test    (ATA Only)\n",    SMARTAUTOOFFLINEENABLE);
-  printf("  %c  Disable SMART Automatic Offline Test    (ATA Only)\n",    SMARTAUTOOFFLINEDISABLE);
-  printf("  %c  Enable  SMART Attribute Autosave        (ATA Only)\n",    SMARTAUTOSAVEENABLE);
-  printf("  %c  Disable SMART Attribute Autosave        (ATA Only)\n",    SMARTAUTOSAVEDISABLE);
-  printf("\nRead and Display Data Options:\n");
-  printf("  %c  Show SMART Status                       (ATA/SCSI)\n",    CHECKSMART);
-  printf("  %c  Show SMART General Attributes           (ATA Only)\n",    GENERALSMARTVALUES);
-  printf("  %c  Show SMART Vendor Attributes            (ATA Only)\n",    SMARTVENDORATTRIB);
-  printf("  %c  Show SMART Drive Error Log              (ATA Only\n",     SMARTERRORLOG);
-  printf("  %c  Show SMART Drive Self Test Log          (ATA Only)\n",    SMARTSELFTESTLOG);
-  printf("\nVendor-specific Attribute Display Options:\n");
-  printf("  %c  Raw Attribute id=009 stored in minutes  (ATA Only)\n",    SMART009MINUTES);
-  printf("\nSelf-Test Options (no more than one):\n");
-  printf("  %c  Execute Off-line data collection        (ATA/SCSI)\n",    SMARTEXEOFFIMMEDIATE);
-  printf("  %c  Execute Short Self Test                 (ATA/SCSI)\n",    SMARTSHORTSELFTEST );
-  printf("  %c  Execute Short Self Test (Captive Mode)  (ATA/SCSI)\n",    SMARTSHORTCAPSELFTEST );
-  printf("  %c  Execute Extended Self Test              (ATA/SCSI)\n",    SMARTEXTENDSELFTEST );
-  printf("  %c  Execute Extended Self Test (Captive)    (ATA/SCSI)\n",    SMARTEXTENDCAPSELFTEST );
-  printf("  %c  Execute Self Test Abort                 (ATA/SCSI)\n",    SMARTSELFTESTABORT );
-  printf("\nExamples:\n");
-  printf("  smartctl -etf /dev/hda  (Enables SMART on first disk)\n");
-  printf("  smartctl -a   /dev/hda  (Prints all SMART information)\n");
-  printf("  smartctl -X   /dev/hda  (Executes extended disk self-test)\n");
-  printf("  smartctl -qvL /dev/hda  (Prints Self-Test & Attribute errors.)\n");
-}
-
-const char opts[] = { 
-  DRIVEINFO, CHECKSMART, SMARTVERBOSEALL, SMARTVENDORATTRIB,
-  GENERALSMARTVALUES, SMARTERRORLOG, SMARTSELFTESTLOG, SMARTDISABLE,
-  SMARTENABLE, SMARTAUTOOFFLINEENABLE, SMARTAUTOOFFLINEDISABLE,
-  SMARTEXEOFFIMMEDIATE, SMARTSHORTSELFTEST, SMARTEXTENDSELFTEST, 
-  SMARTSHORTCAPSELFTEST, SMARTEXTENDCAPSELFTEST, SMARTSELFTESTABORT,
-  SMARTAUTOSAVEENABLE,SMARTAUTOSAVEDISABLE,PRINTCOPYLEFT,SMART009MINUTES,
-  QUIETMODE,VERYQUIETMODE,NOTSCSIDEVICE,NOTATADEVICE,
-  EXITCHECKSUMERROR,ULTRACONSERVATIVE,PERMISSIVE,
-  'h','?','\0'
-};
-
-unsigned char printcopyleft=0,tryata=0,tryscsi=0;
-
-/*      Takes command options and sets features to be run */	
-void ParseOpts (int argc, char** argv){
-  int optchar;
-  extern char *optarg;
-  extern int optopt, optind, opterr;
-  
-  memset(con,0,sizeof(*con));
-  con->testcase=-1;
-  opterr=optopt=0;
-  while (-1 != (optchar = getopt(argc, argv, opts))) {
-    switch (optchar){
-    case EXITCHECKSUMERROR:
-      con->checksumfail=1;
-      break;
-    case PERMISSIVE:
-      con->permissive=1;
-      break;
-    case ULTRACONSERVATIVE:
-      con->conservative=1;
-      break;
-    case NOTATADEVICE:
-      tryata=0;
-      tryscsi=1;
-      break;
-    case NOTSCSIDEVICE:
-      tryata=1;
-      tryscsi=0;
-      break;
-    case QUIETMODE:
-      con->quietmode=TRUE;
-      break;
-    case VERYQUIETMODE:
-      con->veryquietmode=TRUE;
-      break;
-    case SMART009MINUTES:
-      con->smart009minutes=TRUE;
-      break;
-    case PRINTCOPYLEFT :
-      printcopyleft=TRUE;
-      break;
-    case DRIVEINFO :
-      con->driveinfo  = TRUE;
-      break;		
-    case CHECKSMART :
-      con->checksmart = TRUE;		
-      break;
-    case SMARTVERBOSEALL :
-      con->driveinfo = TRUE;
-      con->checksmart = TRUE;
-      con->generalsmartvalues = TRUE;
-      con->smartvendorattrib = TRUE;
-      con->smarterrorlog = TRUE;
-      con->smartselftestlog = TRUE;
-      break;
-    case SMARTVENDORATTRIB :
-      con->smartvendorattrib = TRUE;
-      break;
-    case GENERALSMARTVALUES :
-      con->generalsmartvalues = TRUE;
-      break;
-    case SMARTERRORLOG :
-      con->smarterrorlog = TRUE;
-      break;
-    case SMARTSELFTESTLOG :
-      con->smartselftestlog = TRUE;
-      break;
-    case SMARTDISABLE :
-      con->smartdisable = TRUE;
-      break;
-    case SMARTENABLE :
-      con->smartenable   = TRUE;
-      break;
-    case SMARTAUTOSAVEENABLE:
-      con->smartautosaveenable = TRUE;
-      break;
-    case SMARTAUTOSAVEDISABLE:
-      con->smartautosavedisable = TRUE;
-      break;
-    case SMARTAUTOOFFLINEENABLE: 
-      con->smartautoofflineenable = TRUE;
-      break;
-    case SMARTAUTOOFFLINEDISABLE:
-      con->smartautoofflinedisable = TRUE;
-      break;
-    case SMARTEXEOFFIMMEDIATE:
-      con->smartexeoffimmediate = TRUE;
-      con->testcase=OFFLINE_FULL_SCAN;
-      break;
-    case SMARTSHORTSELFTEST :
-      con->smartshortselftest = TRUE;
-      con->testcase=SHORT_SELF_TEST;
-      break;
-    case SMARTEXTENDSELFTEST :
-      con->smartextendselftest = TRUE;
-      con->testcase=EXTEND_SELF_TEST;
-      break;
-    case SMARTSHORTCAPSELFTEST:
-      con->smartshortcapselftest = TRUE;
-      con->testcase=SHORT_CAPTIVE_SELF_TEST;
-      break;
-    case SMARTEXTENDCAPSELFTEST:
-      con->smartextendcapselftest = TRUE;
-      con->testcase=EXTEND_CAPTIVE_SELF_TEST;
-      break;
-    case SMARTSELFTESTABORT:
-      con->smartselftestabort = TRUE;
-      con->testcase=ABORT_SELF_TEST;
-      break;
-    case 'h':
-    case '?':
-    default:
-      con->veryquietmode=FALSE;
-      printslogan();
-      if (optopt){
-	pout("=======> UNRECOGNIZED OPTION: %c <=======\n\n",(int)optopt);
-	Usage();
-	exit(FAILCMD);
-      }
-      Usage();
-      exit(0);	
-    }
-  }
-  // Do this here, so results are independent of argument order	
-  if (con->quietmode)
-    con->veryquietmode=TRUE;
-  
-  // error message if user has asked for more than one test
-  if (1<(con->smartexeoffimmediate+con->smartshortselftest+con->smartextendselftest+
-	 con->smartshortcapselftest+con->smartextendcapselftest+con->smartselftestabort)){
-    con->veryquietmode=FALSE;
-    printslogan();
-    Usage();
-    printf ("\nERROR: smartctl can only run a single test (or abort) at a time.\n\n");
-    exit(FAILCMD);
-  }
-
-  // From here on, normal operations...
-  printslogan();
-  
-  // Print Copyright/License info if needed
-  if (printcopyleft){
-    printcopy();
-    if (argc==2)
-      exit(0);
-  }   
-}
-
-
-// Printing function (controlled by global con->veryquietmode) 
-
-// [From GLIBC Manual: Since the prototype doesn't specify types for
-// optional arguments, in a call to a variadic function the default
-// argument promotions are performed on the optional argument
-// values. This means the objects of type char or short int (whether
-// signed or not) are promoted to either int or unsigned int, as
-// appropriate.]
-void pout(char *fmt, ...){
-  va_list ap;
-
-  // initialize variable argument list 
-  va_start(ap,fmt);
-  if (con->veryquietmode){
-    va_end(ap);
-    return;
-  }
-
-  // print out
-  vprintf(fmt,ap);
-  va_end(ap);
-  return;
-}
-
-
-/* Main Program */
-int main (int argc, char **argv){
-  int fd,retval=0;
-  char *device;
-  atamainctrl control;
-  const char *devroot="/dev/";
-
-  // define control block for external functions
-  con=&control;
-
-  // Part input arguments
-  ParseOpts(argc,argv);
-    
-  // Further argument checking
-  if (argc != 3){
-    Usage();
-    return FAILCMD;
-  }
-  
-  // open device - read-only mode is enough to issue needed commands
-  fd = open(device=argv[2], O_RDONLY);  
-  if (fd<0) {
-    perror("Smartctl device open failed");
-    return FAILDEV;
-  }
-
-  // if necessary, try to guess if this is an ATA or SCSI device
-  if (!tryata && !tryscsi) {
-    if (!strncmp(device,devroot,strlen(devroot)) && strlen(device)>5){
-      if (device[5] == 'h')
-	tryata=1;
-      if (device[5] == 's')
-	tryscsi=1;
-    }
-    else if (strlen(device)){
-	if (device[0] == 'h')
-	  tryata=1;
-	if (device[0] == 's')
-	  tryscsi=1;
-      }
-  }
-
-  // now call appropriate ATA or SCSI routine
-  if (tryata)
-    retval=ataPrintMain(fd);
-  else if (tryscsi)
-    scsiPrintMain (fd);
-  else {
-    pout("Smartctl: specify if this is an ATA or SCSI device with the -%c or -%c options respectively.\n",
-	 NOTSCSIDEVICE, NOTATADEVICE);
-    Usage();
-    return FAILCMD;
-  }
-
-  return retval;
-}