smartctl.8.in, smartd.conf.5.in, update-smart-drivedb.8.in:

Remove EXPERIMENTAL notes for features added before 7.2.

git-svn-id: https://svn.code.sf.net/p/smartmontools/code/trunk@5345 4ea69e1a-61f1-4043-bf83-b5c94c648137

smartmontools/ChangeLog

 $Id$
 
+2022-03-04  Christian Franke  <franke@computer.org>
+
+	smartctl.8.in, smartd.conf.5.in, update-smart-drivedb.8.in:
+	Remove EXPERIMENTAL notes for features added before 7.2.
+
 2022-03-02  Christian Franke  <franke@computer.org>
 
 	do_release: Add '--nocheck' option.

smartmontools/smartctl.8.in

@@ -351,7 +351,7 @@ byte array (\*(AqKEY_le\*(Aq).
 By default, the additional elements are only output if the value actually
 exceeds the range.
 .br
-\*(Aqy\*(Aq: [NEW EXPERIMENTAL SMARTCTL FEATURE] Outputs in YAML format.
+\*(Aqy\*(Aq: Outputs in YAML format.
 .Sp
 The following two arguments are primarily indented for development:
 .br
@@ -482,8 +482,7 @@ to the driver.
 The default namespace id is the broadcast namespace id (0xffffffff).
 .Sp
 .I sntrealtek
-\- [NEW EXPERIMENTAL SMARTCTL FEATURE]
-this device type is for NVMe disks that are behind a Realtek USB to NVMe
+\- this device type is for NVMe disks that are behind a Realtek USB to NVMe
 bridge.
 .Sp
 .\" %ENDIF NOT OS Darwin
@@ -723,9 +722,8 @@ Vendor Specific Log at address 0xc0.
 Using this option with other devices may have undesirable side effects.\fP
 .Sp
 .I jmb39x[\-q],N[,sLBA][,force][+TYPE]
-\- [NEW EXPERIMENTAL SMARTCTL FEATURE]
-the device consists of multiple SATA disks connected to a JMicron JMB39x RAID
-port multiplier.
+\- the device consists of multiple SATA disks connected to a JMicron JMB39x
+RAID port multiplier.
 The suffix \*(Aq\-q\*(Aq selects a slightly different command variant used by
 some QNAP NAS devices.
 The integer N is the port number from 0 to 4.
@@ -745,8 +743,7 @@ The \*(Aqforce\*(Aq flag disables this check.
 with a signal.\fP
 .Sp
 .I jms56x,N[,sLBA][,force][+TYPE]
-\- [NEW EXPERIMENTAL SMARTCTL FEATURE]
-the device consists of multiple SATA disks connected to a JMicron JMS56x
+\- the device consists of multiple SATA disks connected to a JMicron JMS56x
 USB to SATA RAID bridge.
 See \*(Aqjmb39x...\*(Aq above for valid arguments.
 .TP
@@ -851,9 +848,7 @@ behaviour.
 This is does not work for SCSI devices yet.
 .TP
 .B \-n POWERMODE[,STATUS[,STATUS2]], \-\-nocheck=POWERMODE[,STATUS[,STATUS2]]
-[ATA]
-[SCSI: NEW EXPERIMENTAL SMARTCTL FEATURE]
-Specifies if \fBsmartctl\fP should exit before performing any
+[ATA, SCSI] Specifies if \fBsmartctl\fP should exit before performing any
 checks when the device is in a low-power mode.
 It may be used to prevent a disk from being spun-up by \fBsmartctl\fP.
 The power mode is ignored by default.
@@ -1073,8 +1068,7 @@ placed in the STANDBY mode without temporarily placing it in the IDLE mode.
 Note that ATA standards do not specify a command to set the standby timer
 without affecting the power mode.
 .br
-[SCSI: NEW EXPERIMENTAL SMARTCTL FEATURE]
-Only the set option with \*(Aqstandby,off\*(Aq or
+[SCSI] Only the set option with \*(Aqstandby,off\*(Aq or
 \*(Aqstandby,0\*(Aq is accepted and will place the SCSI disk
 into "ACTIVE" power condition.
 .Sp
@@ -1084,8 +1078,7 @@ This usually spins down the drive.
 The setting of the standby timer is not affected unless
 \*(Aq\-s standby,[N|off]\*(Aq is also specified.
 .br
-[SCSI: NEW EXPERIMENTAL SMARTCTL FEATURE]
-Only the set option is accepted and will place the SCSI
+[SCSI] Only the set option is accepted and will place the SCSI
 disk into "STANDBY_Z" power condition.
 .Sp
 .I wcache[,on|off]

smartmontools/smartd.conf.5.in

 .ig
 Copyright (C) 2002-10 Bruce Allen
-Copyright (C) 2004-21 Christian Franke
+Copyright (C) 2004-22 Christian Franke
 
 SPDX-License-Identifier: GPL-2.0-or-later
 
@@ -292,10 +292,7 @@ Warning emails will be sent for all monitored devices.
 A device is ignored by DEVICESCAN if a configuration line with the same
 device name exists.
 .\" %IF NOT OS Windows OS2
-.br
-[NEW EXPERIMENTAL SMARTD FEATURE]
 Symbolic links are resolved before this check is done.
-.PP
 .\" %ENDIF NOT OS Windows OS2
 A device name is also ignored if another device with same identify
 information (vendor, model, firmware version, serial number, WWN) already
@@ -470,8 +467,7 @@ to the driver.
 The default namespace id is the broadcast namespace id (0xffffffff).
 .Sp
 .I sntrealtek
-\- [NEW EXPERIMENTAL SMARTD FEATURE]
-this device type is for NVMe disks that are behind a Realtek USB to NVMe
+\- this device type is for NVMe disks that are behind a Realtek USB to NVMe
 bridge.
 .Sp
 .\" %ENDIF NOT OS Darwin
@@ -569,17 +565,15 @@ The integer N is the port number from 0 to 3 of the ATA drive to be targeted.
 Please see the \fBsmartctl\fP(8) man page for further details.
 .Sp
 .I jmb39x[\-q],N[,sLBA][,force][+TYPE]
-\- [NEW EXPERIMENTAL SMARTD FEATURE]
-the device consists of multiple SATA disks connected to a JMicron JMB39x RAID
-port multiplier.
+\- the device consists of multiple SATA disks connected to a JMicron JMB39x
+RAID port multiplier.
 The suffix \*(Aq\-q\*(Aq selects a slightly different command variant used by
 some QNAP NAS devices.
 The integer N is the port number from 0 to 4.
 Please see the \fBsmartctl\fP(8) man page for further details.
 .Sp
 .I jms56x,N[,sLBA][,force][+TYPE]
-\- [NEW EXPERIMENTAL SMARTD FEATURE]
-the device consists of multiple SATA disks connected to a JMicron JMS56x
+\- the device consists of multiple SATA disks connected to a JMicron JMS56x
 USB to SATA RAID bridge.
 See \*(Aqjmb39x...\*(Aq above for valid arguments.
 .Sp
@@ -884,7 +878,6 @@ single decimal digit or the match will always fail!
 .\" This resets the margin to the level prior to the '.RS ... .RE' block.
 .TP
 .B \&
-[NEW EXPERIMENTAL SMARTD FEATURE]
 If the regular expression contains substrings of the form \fB:NNN\fP
 or \fB:NNN-LLL\fP, where NNN and LLL are three decimal digits, staggered
 tests are enabled.

smartmontools/update-smart-drivedb.8.in

@@ -150,7 +150,6 @@ This requires \*(Aq\-\-no\-verify\*(Aq because the trunk versions are not
 signed.
 .TP
 .B \-\-branch X.Y
-[NEW EXPERIMENTAL UPDATE-SMART-DRIVEDB FEATURE]
 Download from branches/RELEASE_\fBX\fP_\fBY\fP_DRIVEDB.
 This also selects the OpenPGP/GPG key for older branches
 (5.40 to 6.6: Key ID DFD22559).