This commit was manufactured by cvs2svn to create tag 'FREEBSD_OK'.

git-svn-id: https://smartmontools.svn.sourceforge.net/svnroot/smartmontools/tags/FREEBSD_OK@1948 4ea69e1a-61f1-4043-bf83-b5c94c648137

CVSROOT/checkoutlist

-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'

CVSROOT/commitinfo

-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/config

-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR

CVSROOT/cvswrappers

-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

CVSROOT/editinfo

-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

CVSROOT/loginfo

-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
-^sm5$ /cvsroot/sitedocs/CVSROOT/cvstools/syncmail -u %{sVv} smartmontools-cvs@lists.sourceforge.net
-^sm5/os_win32$ /cvsroot/sitedocs/CVSROOT/cvstools/syncmail -u %{sVv} smartmontools-cvs@lists.sourceforge.net
-^www$ /cvsroot/sitedocs/CVSROOT/cvstools/syncmail -u %{sVv} ballen4705@users.sourceforge.net

CVSROOT/modules

-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.

CVSROOT/notify

-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"

CVSROOT/rcsinfo

-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

sm5/atacmdnames.cpp

-/*
- * atacmdnames.c
- *
- * This module is based on the T13/1532D Volume 1 Revision 3 (ATA/ATAPI-7)
- * specification, which is available from http://www.t13.org/#FTP_site
- *
- * Home page of code is: http://smartmontools.sourceforge.net
- * Address of support mailing list: smartmontools-support@lists.sourceforge.net
- *
- * Copyright (C) 2003-4 Philip Williams
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include "atacmdnames.h"
-#include <stdlib.h>
-#include <stdio.h>
-
-#define COMMAND_TABLE_SIZE 256
-
-const char *atacmdnames_c_cvsid="$Id: atacmdnames.cpp,v 1.11 2004/01/02 16:05:24 ballen4705 Exp $" ATACMDNAMES_H_CVSID;
-
-const char cmd_reserved[]        = "[RESERVED]";
-const char cmd_vendor_specific[] = "[VENDOR SPECIFIC]";
-const char cmd_reserved_sa[]     = "[RESERVED FOR SERIAL ATA]";
-const char cmd_reserved_cf[]     = "[RESERVED FOR COMPACTFLASH ASSOCIATION]";
-const char cmd_reserved_mcpt[]   = "[RESERVED FOR MEDIA CARD PASS THROUGH]";
-const char cmd_recalibrate_ret4[]= "RECALIBRATE [RET-4]";
-const char cmd_seek_ret4[]       = "SEEK [RET-4]";
-
-const char *command_table[COMMAND_TABLE_SIZE] = {
-/*-------------------------------------------------- 00h-0Fh -----*/
-  "NOP",
-  cmd_reserved,
-  cmd_reserved,
-  "CFA REQUEST EXTENDED ERROR CODE",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  "DEVICE RESET",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- 10h-1Fh -----*/
-  "RECALIBRATE [OBS-4]",
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-  cmd_recalibrate_ret4,
-/*-------------------------------------------------- 20h-2Fh -----*/
-  "READ SECTOR(S)",
-  "READ SECTOR(S) [OBS-5]",
-  "READ LONG (w/ retry) [OBS-4]",
-  "READ LONG (w/o retry) [OBS-4]",
-  "READ SECTOR(S) EXT",
-  "READ DMA EXT",
-  "READ DMA QUEUED EXT",
-  "READ NATIVE MAX ADDRESS EXT",
-  cmd_reserved,
-  "READ MULTIPLE EXT",
-  "READ STREAM DMA",
-  "READ STREAM PIO",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  "READ LOG EXT",
-/*-------------------------------------------------- 30h-3Fh -----*/
-  "WRITE SECTOR(S)",
-  "WRITE SECTOR(S) [OBS-5]",
-  "WRITE LONG(w/ retry) [OBS-4]",
-  "WRITE LONG(w/o retry) [OBS-4]",
-  "WRITE SECTORS(S) EXT",
-  "WRITE DMA EXT",
-  "WRITE DMA QUEUED EXT",
-  "SET MAX ADDRESS EXT",
-  "CFA WRITE SECTORS WITHOUT ERASE",
-  "WRITE MULTIPLE EXT",
-  "WRITE STREAM DMA",
-  "WRITE STREAM PIO",
-  "WRITE VERIFY [OBS-4]",
-  "WRITE DMA FUA EXT",
-  "WRITE DMA QUEUED FUA EXT",
-  "WRITE LOG EXT",
-/*-------------------------------------------------- 40h-4Fh -----*/
-  "READ VERIFY SECTOR(S)",
-  "READ VERIFY SECTOR(S) [OBS-5]",
-  "READ VERIFY SECTOR(S) EXT",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- 50h-5Fh -----*/
-  "FORMAT TRACK [OBS-4]",
-  "CONFIGURE STREAM",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- 60h-6Fh -----*/
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved_sa,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- 70h-7Fh -----*/
-  "SEEK [OBS-7]",
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-  cmd_seek_ret4,
-/*-------------------------------------------------- 80h-8Fh -----*/
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  "CFA TRANSLATE SECTOR [VS IF NO CFA]",
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-/*-------------------------------------------------- 90h-9Fh -----*/
-  "EXECUTE DEVICE DIAGNOSTIC",
-  "INITIALIZE DEVICE PARAMETERS [OBS-6]",
-  "DOWNLOAD MICROCODE",
-  cmd_reserved,
-  "STANDBY IMMEDIATE [RET-4]",
-  "IDLE IMMEDIATE [RET-4]",
-  "STANDBY [RET-4]",
-  "IDLE [RET-4]",
-  "CHECK POWER MODE [RET-4]",
-  "SLEEP [RET-4]",
-  cmd_vendor_specific,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- A0h-AFh -----*/
-  "PACKET",
-  "IDENTIFY PACKET DEVICE",
-  "SERVICE",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-/*-------------------------------------------------- B0h-BFh -----*/
-  "SMART",
-  "DEVICE CONFIGURATION",
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-  cmd_reserved_cf,
-/*-------------------------------------------------- C0h-CFh -----*/
-  "CFA ERASE SECTORS [VS IF NO CFA]",
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  "READ MULTIPLE",
-  "WRITE MULTIPLE",
-  "SET MULTIPLE MODE",
-  "READ DMA QUEUED",
-  "READ DMA",
-  "READ DMA [OBS-5]",
-  "WRITE DMA",
-  "WRITE DMA [OBS-5]",
-  "WRITE DMA QUEUED",
-  "CFA WRITE MULTIPLE WITHOUT ERASE",
-  "WRITE MULTIPLE FUA EXT",
-  cmd_reserved,
-/*-------------------------------------------------- D0h-DFh -----*/
-  cmd_reserved,
-  "CHECK MEDIA CARD TYPE",
-  cmd_reserved_mcpt,
-  cmd_reserved_mcpt,
-  cmd_reserved_mcpt,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  cmd_reserved,
-  "GET MEDIA STATUS",
-  "ACKNOWLEDGE MEDIA CHANGE [RET-4]",
-  "BOOT POST-BOOT [RET-4]",
-  "BOOT PRE-BOOT [RET-4]",
-  "MEDIA LOCK",
-  "MEDIA UNLOCK",
-/*-------------------------------------------------- E0h-EFh -----*/
-  "STANDBY IMMEDIATE",
-  "IDLE IMMEDIATE",
-  "STANDBY",
-  "IDLE",
-  "READ BUFFER",
-  "CHECK POWER MODE",
-  "SLEEP",
-  "FLUSH CACHE",
-  "WRITE BUFFER",
-  "WRITE SAME [RET-4]",  /* Warning!  This command is retired but the value of
-                            f_reg is used in look_up_ata_command().  If this
-                            command code is reclaimed in a future standard then
-                            be sure to update look_up_ata_command(). */
-  "FLUSH CACHE EXIT",
-  cmd_reserved,
-  "IDENTIFY DEVICE",
-  "MEDIA EJECT",
-  "IDENTIFY DEVICE DMA [OBS-4]",
-  "SET FEATURES",
-/*-------------------------------------------------- F0h-FFh -----*/
-  cmd_vendor_specific,
-  "SECURITY SET PASSWORD",
-  "SECURITY UNLOCK",
-  "SECURITY ERASE PREPARE",
-  "SECURITY ERASE UNIT",
-  "SECURITY FREEZE LOCK",
-  "SECURITY DISABLE PASSWORD",
-  cmd_vendor_specific,
-  "READ NATIVE MAX ADDRESS",
-  "SET MAX",
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific,
-  cmd_vendor_specific
-};
-
-/* Returns the name of the command (and possibly sub-command) with the given
-   command code and feature register values.   For most command codes this
-   simply returns the corresponding entry in the command_table array, but for
-   others the value of the feature register specifies a subcommand or
-   distinguishes commands. */
-const char *look_up_ata_command(unsigned char c_code, unsigned char f_reg) {
-
-  // check that command table not messed up.  The compiler will issue
-  // warnings if there are too many array elements, but won't issue
-  // warnings if there are not enough of them.
-  if (sizeof(command_table) != sizeof(char *)*COMMAND_TABLE_SIZE){
-    fprintf(stderr, 
-            "Problem in atacmdnames.c.  Command Table command_table[] does\n"
-            "not have %d entries!  It has %d entries. Please fix it.\n",
-            COMMAND_TABLE_SIZE, (int)(sizeof(command_table)/sizeof(char *)));
-    abort();
-  }
-
-  switch (c_code) {
-  case 0x00:  /* NOP */
-    switch (f_reg) {
-    case 0x00:
-      return "NOP [Abort queued commands]";
-    case 0x01:
-      return "NOP [Don't abort queued commands]";
-    default:
-      return "NOP [Reserved subcommand]";
-    }
-  case 0x92:  /* DOWNLOAD MICROCODE */
-    switch (f_reg) {
-    case 0x01:
-      return "DOWNLOAD MICROCODE [Temporary]";
-    case 0x07:
-      return "DOWNLOAD MICROCODE [Save]";
-    default:
-      return "DOWNLOAD MICROCODE [Reserved subcommand]";
-    }
-  case 0xB0:  /* SMART */
-    switch (f_reg) {
-    case 0xD0:
-      return "SMART READ DATA";
-    case 0xD1:
-      return "SMART READ ATTRIBUTE THRESHOLDS [OBS-4]";
-    case 0xD2:
-      return "SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE";
-    case 0xD3:
-      return "SMART SAVE ATTRIBUTE VALUES [OBS-6]";
-    case 0xD4:
-      return "SMART EXECUTE OFF-LINE IMMEDIATE";
-    case 0xD5:
-      return "SMART READ LOG";
-    case 0xD6:
-      return "SMART WRITE LOG";
-    case 0xD7:
-      return "SMART WRITE ATTRIBUTE THRESHOLDS [NS, OBS-4]";
-    case 0xD8:
-      return "SMART ENABLE OPERATIONS";
-    case 0xD9:
-      return "SMART DISABLE OPERATIONS";
-    case 0xDA:
-      return "SMART RETURN STATUS";
-    case 0xDB:
-      return "SMART EN/DISABLE AUTO OFFLINE [NS (SFF-8035i)]";
-    default:
-        if (f_reg >= 0xE0)
-          return "[Vendor specific SMART command]";
-        else
-          return "[Reserved SMART command]";
-    }
-  case 0xB1:  /* DEVICE CONFIGURATION */
-    switch (f_reg) {
-    case 0xC0:
-      return "DEVICE CONFIGURATION RESTORE";
-    case 0xC1:
-      return "DEVICE CONFIGURATION FREEZE LOCK";
-    case 0xC2:
-      return "DEVICE CONFIGURATION IDENTIFY";
-    case 0xC3:
-      return "DEVICE CONFIGURATION SET";
-    default:
-      return "DEVICE CONFIGURATION [Reserved command]";
-    }
-  case 0xE9:  /* WRITE SAME */
-    switch (f_reg) {
-    case 0x22:
-      return "WRITE SAME [Start specified] [RET-4]";
-    case 0xDD:
-      return "WRITE SAME [Start unspecified] [RET-4]";
-    default:
-      return "WRITE SAME [Invalid subcommand] [RET-4]";
-    } 
-  case 0xEF:  /* SET FEATURES */
-    switch (f_reg) {
-    case 0x01:
-      return "SET FEATURES [Enable 8-bit PIO]";
-    case 0x02:
-      return "SET FEATURES [Enable write cache]";
-    case 0x03:
-      return "SET FEATURES [Set transfer mode]";
-    case 0x04:
-      return "SET FEATURES [Enable auto DR] [OBS-4]";
-    case 0x05:
-      return "SET FEATURES [Enable APM]";
-    case 0x06:
-      return "SET FEATURES [Enable Pwr-Up In Standby]";
-    case 0x07:
-      return "SET FEATURES [Set device spin-up]";
-    case 0x09:
-      return "SET FEATURES [Reserved (address offset)]";
-    case 0x0A:
-      return "SET FEATURES [Enable CFA power mode 1]";
-    case 0x10:
-      return "SET FEATURES [Reserved for Serial ATA]";
-    case 0x20:
-      return "SET FEATURES [Set Time-ltd R/W WCT]";
-    case 0x21:
-      return "SET FEATURES [Set Time-ltd R/W EH]";
-    case 0x31:
-      return "SET FEATURES [Disable Media Status Notf]";
-    case 0x33:
-      return "SET FEATURES [Disable retry] [OBS-4]";
-    case 0x42:
-      return "SET FEATURES [Enable AAM]";
-    case 0x43:
-      return "SET FEATURES [Set Max Host I/F S Times]";
-    case 0x44:
-      return "SET FEATURES [Length of VS data] [OBS-4]";
-    case 0x54:
-      return "SET FEATURES [Set cache segs] [OBS-4]";
-    case 0x55:
-      return "SET FEATURES [Disable read look-ahead]";
-    case 0x5D:
-      return "SET FEATURES [Enable release interrupt]";
-    case 0x5E:
-      return "SET FEATURES [Enable SERVICE interrupt]";
-    case 0x66:
-      return "SET FEATURES [Disable revert defaults]";
-    case 0x77:
-      return "SET FEATURES [Disable ECC] [OBS-4]";
-    case 0x81:
-      return "SET FEATURES [Disable 8-bit PIO]";
-    case 0x82:
-      return "SET FEATURES [Disable write cache]";
-    case 0x84:
-      return "SET FEATURES [Disable auto DR] [OBS-4]";
-    case 0x85:
-      return "SET FEATURES [Disable APM]";
-    case 0x86:
-      return "SET FEATURES [Disable Pwr-Up In Standby]";
-    case 0x88:
-      return "SET FEATURES [Disable ECC] [OBS-4]";
-    case 0x89:
-      return "SET FEATURES [Reserved (address offset)]";
-    case 0x8A:
-      return "SET FEATURES [Disable CFA power mode 1]";
-    case 0x90:
-      return "SET FEATURES [Reserved for Serial ATA]";
-    case 0x95:
-      return "SET FEATURES [Enable Media Status Notf]";
-    case 0x99:
-      return "SET FEATURES [Enable retries] [OBS-4]";
-    case 0x9A:
-      return "SET FEATURES [Set max avg curr] [OBS-4]";
-    case 0xAA:
-      return "SET FEATURES [Enable read look-ahead]";
-    case 0xAB:
-      return "SET FEATURES [Set max prefetch] [OBS-4]";
-    case 0xBB:
-      return "SET FEATURES [4 bytes VS data] [OBS-4]";
-    case 0xC2:
-      return "SET FEATURES [Disable AAM]";
-    case 0xCC:
-      return "SET FEATURES [Enable revert to defaults]";
-    case 0xDD:
-      return "SET FEATURES [Disable release interrupt]";
-    case 0xDE:
-      return "SET FEATURES [Disable SERVICE interrupt]";
-    case 0xE0:
-      return "SET FEATURES [Obsolete subcommand]";
-    default:
-      if (f_reg >= 0xF0)
-        return "SET FEATURES [Reserved for CFA]";
-      else
-        return "SET FEATURES [Reserved subcommand]";
-    }
-  case 0xF9:  /* SET MAX */
-    switch (f_reg) {
-    case 0x00:
-      return "SET MAX ADDRESS [OBS-6]";
-    case 0x01:
-      return "SET MAX SET PASSWORD";
-    case 0x02:
-      return "SET MAX LOCK";
-    case 0x03:
-      return "SET MAX UNLOCK";
-    case 0x04:
-      return "SET MAX FREEZE LOCK";
-    default:
-      return "[Reserved SET MAX command]";
-    }
-  default:
-    return command_table[c_code];
-  }
-}

sm5/os_darwin.cpp

-/*
- * os_darwin.c
- *
- * Home page of code is: http://smartmontools.sourceforge.net
- *
- * Copyright (C) 2004 Geoffrey Keating <geoffk@geoffk.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <stdbool.h>
-#include <errno.h>
-#include <mach/mach.h>
-#include <mach/mach_error.h>
-#include <mach/mach_init.h>
-#include <IOKit/IOCFPlugIn.h>
-#include <IOKit/IOKitLib.h>
-#include <IOKit/IOReturn.h>
-#include <IOKit/IOBSD.h>
-#include <IOKit/storage/ata/IOATAStorageDefines.h>
-#include <IOKit/storage/ata/ATASMARTLib.h>
-#include <IOKit/storage/IOStorageDeviceCharacteristics.h>
-#include <IOKit/storage/IOMedia.h>
-#include <CoreFoundation/CoreFoundation.h>
-
-  // No, I don't know why there isn't a header for this.
-#define kIOATABlockStorageDeviceClass   "IOATABlockStorageDevice"
-
-#include "atacmds.h"
-#include "scsicmds.h"
-#include "utility.h"
-
-#include "os_darwin.h"
-
-// Needed by '-V' option (CVS versioning) of smartd/smartctl
-const char *os_XXXX_c_cvsid="$Id: os_darwin.cpp,v 1.8 2004/08/18 19:27:44 likewise Exp $" \
-ATACMDS_H_CVSID OS_XXXX_H_CVSID SCSICMDS_H_CVSID UTILITY_H_CVSID;
-
-
-// Print examples for smartctl.
-void print_smartctl_examples(){
-  printf("=================================================== SMARTCTL EXAMPLES =====\n\n");
-  printf(
-         "  smartctl -a disk0                            (Prints all SMART information)\n\n"
-         "  smartctl -t long /dev/disk0              (Executes extended disk self-test)\n\n"
-#ifdef HAVE_GETOPT_LONG
-         "  smartctl --smart=on --saveauto=on /dev/rdisk0 (Enables SMART on first disk)\n\n"
-         "  smartctl --attributes --log=selftest --quietmode=errorsonly /dev/disk0\n"
-         "                                        (Prints Self-Test & Attribute errors)\n\n"
-#else
-         "  smartctl -s on -S on /dev/rdisk0              (Enables SMART on first disk)\n\n"
-         "  smartctl -A -l selftest -q errorsonly /dev/disk0\n"
-         "                                        (Prints Self-Test & Attribute errors)\n\n"
-#endif
-         "  smartctl -a IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice\n"
-         "                                                 (You can use IOService: ...)\n\n"
-         "  smartctl -c IODeviceTree:/pci@f4000000/ata-6@D/@0:0\n"
-         "                                                       (... Or IODeviceTree:)\n"
-         );
-  return;
-}
-
-// tries to guess device type given the name (a path).  See utility.h
-// for return values.
-int guess_device_type (const char* dev_name) {
-  // Only ATA is supported right now, so that's what it'd better be.
-  dev_name = dev_name;  // suppress unused warning.
-  return CONTROLLER_ATA;
-}
-
-// makes a list of ATA or SCSI devices for the DEVICESCAN directive of
-// smartd.  Returns number N of devices, or -1 if out of
-// memory. Allocates N+1 arrays: one of N pointers (devlist); the
-// other N arrays each contain null-terminated character strings.  In
-// the case N==0, no arrays are allocated because the array of 0
-// pointers has zero length, equivalent to calling malloc(0).
-int make_device_names (char*** devlist, const char* name) {
-  IOReturn err;
-  io_iterator_t i;
-  io_object_t device;
-  int result;
-  int index;
-  const char * cls;
-
-  if (strcmp (name, "ATA") == 0)
-    cls = kIOATABlockStorageDeviceClass;
-  else  // only ATA supported right now.
-    return 0;
-
-  err = IOServiceGetMatchingServices (kIOMasterPortDefault,
-				      IOServiceMatching (cls),
-				      &i);
-  if (err != kIOReturnSuccess)
-    return -1;
-
-  // Count the devices.
-  for (result = 0; (device = IOIteratorNext (i)) != MACH_PORT_NULL; result++)
-    IOObjectRelease (device);
-
-  // Create an array of service names.
-  IOIteratorReset (i);
-  *devlist = Calloc (result, sizeof (char *));
-  if (! *devlist)
-    goto error;
-  for (index = 0; (device = IOIteratorNext (i)) != MACH_PORT_NULL; index++)
-    {
-      io_string_t devName;
-      IORegistryEntryGetPath(device, kIOServicePlane, devName);
-      IOObjectRelease (device);
-
-      (*devlist)[index] = CustomStrDup (devName, true, __LINE__, __FILE__);
-      if (! (*devlist)[index])
-	goto error;
-    }
-  IOObjectRelease (i);
-
-  return result;
-
- error:
-  IOObjectRelease (i);
-  if (*devlist)
-    {
-      for (index = 0; index < result; index++)
-	if ((*devlist)[index])
-	  FreeNonZero ((*devlist)[index], 0, __LINE__, __FILE__);
-      FreeNonZero (*devlist, result * sizeof (char *), __LINE__, __FILE__);
-    }
-  return -1;
-}
-
-// Information that we keep about each device.
-
-static struct {
-  io_object_t ioob;
-  bool hassmart;
-  IOCFPlugInInterface **plugin;
-  IOATASMARTInterface **smartIf;
-} devices[20];
-
-// Like open().  Return non-negative integer handle, only used by the
-// functions below.  type=="ATA" or "SCSI".  The return value is
-// an index into the devices[] array.  If the device can't be opened,
-// sets errno and returns -1.
-// Acceptable device names are:
-// /dev/disk*
-// /dev/rdisk*
-// disk*
-// IOService:*
-// IODeviceTree:*
-int deviceopen(const char *pathname, char *type){
-  size_t devnum;
-  const char *devname;
-  io_object_t disk;
-  
-  if (strcmp (type, "ATA") != 0)
-    {
-      errno = EINVAL;
-      return -1;
-    }
-  
-  // Find a free device number.
-  for (devnum = 0; devnum < sizeof (devices) / sizeof (devices[0]); devnum++)
-    if (! devices[devnum].ioob)
-      break;
-  if (devnum == sizeof (devices) / sizeof (devices[0]))
-    {
-      errno = EMFILE;
-      return -1;
-    }
-  
-  devname = NULL;
-  if (strncmp (pathname, "/dev/rdisk", 10) == 0)
-    devname = pathname + 6;
-  else if (strncmp (pathname, "/dev/disk", 9) == 0)
-    devname = pathname + 5;
-  else if (strncmp (pathname, "disk", 4) == 0)
-    // allow user to just say 'disk0'
-    devname = pathname;
-
-  // Find the device.
-  if (devname)
-    {
-      CFMutableDictionaryRef matcher;
-      matcher = IOBSDNameMatching (kIOMasterPortDefault, 0, devname);
-      disk = IOServiceGetMatchingService (kIOMasterPortDefault, matcher);
-    }
-  else
-    {
-      disk = IORegistryEntryFromPath (kIOMasterPortDefault, pathname);
-    }
-
-  if (! disk)
-    {
-      errno = ENOENT;
-      return -1;
-    }
-  
-  // Find the ATA block storage driver that is the parent of this device
-  while (! IOObjectConformsTo (disk, kIOATABlockStorageDeviceClass))
-    {
-      IOReturn err;
-      io_object_t notdisk = disk;
-
-      err = IORegistryEntryGetParentEntry (notdisk, kIOServicePlane, &disk);
-      if (err != kIOReturnSuccess || ! disk)
-	{
-	  errno = ENODEV;
-	  IOObjectRelease (notdisk);
-	  return -1;
-	}
-    }
-
-  devices[devnum].ioob = disk;
-  
-  {
-    CFDictionaryRef diskChars = NULL;
-    CFNumberRef diskFeatures = NULL;
-    UInt32 ataFeatures;
-
-    // Determine whether the drive actually supports SMART.
-    if ((diskChars = IORegistryEntryCreateCFProperty (disk, 
-			      CFSTR (kIOPropertyDeviceCharacteristicsKey),
-						      kCFAllocatorDefault,
-						      kNilOptions)) != NULL
-	&& CFDictionaryGetValueIfPresent (diskChars, CFSTR ("ATA Features"),
-					  (const void **)&diskFeatures)
-	&& CFNumberGetValue (diskFeatures, kCFNumberLongType, &ataFeatures)
-	&& (ataFeatures & kIOATAFeatureSMART))
-      devices[devnum].hassmart = true;
-    else
-      devices[devnum].hassmart = false;
-    if (diskChars)
-      CFRelease (diskChars);
-  }
-  
-  {
-    SInt32 dummy;
-  
-    devices[devnum].plugin = NULL;
-    devices[devnum].smartIf = NULL;
-
-    // Create an interface to the ATA SMART library.
-    if (devices[devnum].hassmart
-	&& IOCreatePlugInInterfaceForService (disk,
-					      kIOATASMARTUserClientTypeID,
-					      kIOCFPlugInInterfaceID,
-					      &devices[devnum].plugin,
-					      &dummy) == kIOReturnSuccess)
-      (*devices[devnum].plugin)->QueryInterface
-	(devices[devnum].plugin,
-	 CFUUIDGetUUIDBytes ( kIOATASMARTInterfaceID),
-	 (LPVOID) &devices[devnum].smartIf);
-  }
-  
-  return devnum;
-}
-
-// Like close().  Acts only on integer handles returned by
-// deviceopen() above.
-int deviceclose(int fd){
-  if (devices[fd].smartIf)
-    (*devices[fd].smartIf)->Release (devices[fd].smartIf);
-  if (devices[fd].plugin)
-    IODestroyPlugInInterface (devices[fd].plugin);
-  IOObjectRelease (devices[fd].ioob);
-  devices[fd].ioob = MACH_PORT_NULL;
-  return 0;
-}
-
-// Interface to ATA devices.  See os_linux.c for the cannonical example.
-// DETAILED DESCRIPTION OF ARGUMENTS
-//   device: is the integer handle provided by deviceopen()
-//   command: defines the different operations, see atacmds.h
-//   select: additional input data IF NEEDED (which log, which type of
-//           self-test).
-//   data:   location to write output data, IF NEEDED (1 or 512 bytes).
-//   Note: not all commands use all arguments.
-// RETURN VALUES (for all commands BUT command==STATUS_CHECK)
-//  -1 if the command failed
-//   0 if the command succeeded,
-// RETURN VALUES if command==STATUS_CHECK
-//  -1 if the command failed OR the disk SMART status can't be determined
-//   0 if the command succeeded and disk SMART status is "OK"
-//   1 if the command succeeded and disk SMART status is "FAILING"
-
-// Things that aren't available in the Darwin interfaces:
-// - Tests other than short and extended (in particular, can't run
-//   an immediate offline test)
-// - Captive-mode tests, aborting tests
-// - ability to switch automatic offline testing on or off
-
-// Note that some versions of Darwin, at least 7H63 and earlier,
-// have a buggy library that treats the boolean value in
-// SMARTEnableDisableOperations, SMARTEnableDisableAutosave, and
-// SMARTExecuteOffLineImmediate as always being true.
-int marvell_command_interface(int fd, smart_command_set command,
-		      int select, char *data)
-{ return -1; }
- 
-int
-ata_command_interface(int fd, smart_command_set command,
-		      int select, char *data)
-{
-  IOATASMARTInterface **ifp = devices[fd].smartIf;
-  IOATASMARTInterface *smartIf;
-  IOReturn err;
-  
-  if (! ifp)
-    return -1;
-  smartIf = *ifp;
-
-  switch (command)
-    {
-    case STATUS:
-      return 0;
-    case STATUS_CHECK:
-      {
-	Boolean is_failing;
-	err = smartIf->SMARTReturnStatus (ifp, &is_failing);
-	if (err == kIOReturnSuccess && is_failing)
-	  return 1;
-	break;
-      }
-    case ENABLE:
-    case DISABLE:
-      err = smartIf->SMARTEnableDisableOperations (ifp, command == ENABLE);
-      break;
-    case AUTOSAVE:
-      err = smartIf->SMARTEnableDisableAutosave (ifp, select != 0);
-      break;
-    case IMMEDIATE_OFFLINE:
-      if (select != SHORT_SELF_TEST && select != EXTEND_SELF_TEST)
-	{
-	  errno = EINVAL;
-	  return -1;
-	}
-      err = smartIf->SMARTExecuteOffLineImmediate (ifp, 
-						   select == EXTEND_SELF_TEST);
-      break;
-    case READ_VALUES:
-      err = smartIf->SMARTReadData (ifp, (ATASMARTData *)data);
-      break;
-    case READ_THRESHOLDS:
-      err = smartIf->SMARTReadDataThresholds (ifp, 
-					      (ATASMARTDataThresholds *)data);
-      break;
-    case READ_LOG:
-      err = smartIf->SMARTReadLogAtAddress (ifp, select, data, 512);
-      break;
-    case WRITE_LOG:
-      err = smartIf->SMARTWriteLogAtAddress (ifp, select, data, 512);
-      break;
-    case IDENTIFY:
-      {
-	UInt32 dummy;
-	err = smartIf->GetATAIdentifyData (ifp, data, 512, &dummy);
-	if (err == kIOReturnSuccess && isbigendian())
-	  {
-	    int i;
-	    /* The system has already byte-swapped, undo it.  */
-	    for (i = 0; i < 256; i+=2)
-	      swap2 (data + i);
-	  }
-      }
-      break;
-    case CHECK_POWER_MODE:
-      // The information is right there in the device registry, but how
-      // to get to it portably?
-    default:
-      errno = ENOTSUP;
-      return -1;
-    }
-  if (err == kIOReturnExclusiveAccess)
-    errno = EBUSY;
-  return err == kIOReturnSuccess ? 0 : -1;
-}
-
-// There's no special handling needed for hidden devices, the kernel
-// must deal with them.
-int escalade_command_interface(int fd, int escalade_port, int escalade_type,
-			       smart_command_set command, int select,
-			       char *data)
-{
-  fd = fd;
-  escalade_port = escalade_port;
-  escalade_type = escalade_type;
-  command = command;
-  select = select;
-  data = data;
-  return -1;
-}
-
-// Interface to SCSI devices.  See os_linux.c
-int do_scsi_cmnd_io(int fd, struct scsi_cmnd_io * iop, int report) {
-  return -ENOSYS;
-}