Select Git revision
generate_table.py
-
Gregory Ashton authoredGregory Ashton authored
build.sh 31.25 KiB
#!/bin/bash
###########################################################################
# Copyright (C) 2008-2009 by Oliver Bock #
# oliver.bock[AT]aei.mpg.de #
# #
# This file is part of Einstein@Home. #
# #
# Einstein@Home is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published #
# by the Free Software Foundation, version 2 of the License. #
# #
# Einstein@Home is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with Einstein@Home. If not, see <http://www.gnu.org/licenses/>. #
# #
###########################################################################
### globals ###############################################################
ROOT=`pwd`
PATH_ORG="$PATH"
PATH_MINGW="$PATH"
LOGFILE=$ROOT/build.log
TARGET=0
TARGET_LINUX=1
TARGET_MAC_INTEL=2
TARGET_MAC_PPC=4
TARGET_WIN32=8
TARGET_DOC=16
BUILDSTATE=0
BS_PREREQUISITES=1
BS_PREPARE_TREE=2
BS_BUILD_SDL=3
BS_BUILD_FREETYPE=4
BS_BUILD_LIBXML=6
BS_BUILD_OGLFT=5
BS_BUILD_BOINC=7
BS_PREPARE_MINGW=8
BS_BUILD_MINGW=9
BS_BUILD_SDL_MINGW=10
BS_BUILD_FREETYPE_MINGW=11
BS_BUILD_LIBXML_MINGW=12
BS_BUILD_OGLFT_MINGW=13
BS_BUILD_BOINC_MINGW=14
### functions (tools) #############################################################
failure()
{
echo "************************************" | tee -a $LOGFILE
echo "Error detected! Stopping build!" | tee -a $LOGFILE
echo "`date`" | tee -a $LOGFILE
if [ -f "$LOGFILE" ]; then
echo "------------------------------------"
echo "Please check logfile: `basename $LOGFILE`"
echo "These are the final ten lines:"
echo "------------------------------------"
tail -n 14 $LOGFILE | head -n 10
fi
echo "************************************" | tee -a $LOGFILE
exit 1
}
distclean()
{
cd $ROOT || failure
echo "Purging build system..." | tee -a $LOGFILE
rm -rf 3rdparty || failure
rm -rf build || failure
rm -rf install || failure
rm -rf doc/html || failure
rm -f doc/*.tag || failure
rm -f .lastbuild || failure
rm -f .buildstate || failure
}
check_last_build()
{
echo "Checking previous build target..." | tee -a $LOGFILE
LASTBUILD=`cat .lastbuild 2>/dev/null`
if [[ ( -f .lastbuild ) && ( "$LASTBUILD" != "$1" ) ]]; then
cd $ROOT || failure
echo "Build target changed! Purging build and install trees..." | tee -a $LOGFILE
rm -rf build >> $LOGFILE || failure
rm -rf install >> $LOGFILE || failure
prepare_tree || failure
fi
echo "$1" > .lastbuild || failure
return 0
}
check_build_state()
{
echo "Checking for previous build checkpoints..." | tee -a $LOGFILE
if [ ! -f .buildstate ]; then
cd $ROOT || failure
echo "No previous build checkpoints found! Starting from scratch..." | tee -a $LOGFILE
else
BUILDSTATE=`cat $ROOT/.buildstate 2>/dev/null`
echo "Recovering previous build..."
fi
return 0
}
store_build_state()
{
echo "Saving build checkpoint..." | tee -a $LOGFILE
echo "$1" > $ROOT/.buildstate || failure
return 0
}
### functions (features) #############################################################
check_prerequisites()
{
if [ $BUILDSTATE -ge $BS_PREREQUISITES ]; then
return 0
fi
echo "Checking prerequisites..." | tee -a $LOGFILE
# required toolchain
TOOLS="automake autoconf m4 cmake wget svn cvs tar patch gcc g++ ld libtool ar lex yacc pkg-config"
for tool in $TOOLS; do
if ! ( type $tool >/dev/null 2>&1 ); then
echo "Missing \"$tool\" which is a required tool!" | tee -a $LOGFILE
return 1
fi
done
return 0
}
prepare_tree()
{
if [ $BUILDSTATE -ge $BS_PREPARE_TREE ]; then
return 0
fi
echo "Preparing tree..." | tee -a $LOGFILE
mkdir -p 3rdparty >> $LOGFILE || failure
mkdir -p install/bin >> $LOGFILE || failure
mkdir -p install/include >> $LOGFILE || failure
mkdir -p install/lib >> $LOGFILE || failure
store_build_state $BS_PREPARE_TREE
return 0
}
prepare_mingw()
{
if [ $BUILDSTATE -ge $BS_PREPARE_MINGW ]; then
return 0
fi
cd $ROOT || failure
echo "Preparing MinGW source tree..." | tee -a $LOGFILE
mkdir -p 3rdparty/mingw/xscripts >> $LOGFILE || failure
cd 3rdparty/mingw/xscripts || failure
if [ -d CVS ]; then
echo "Updating MinGW build script..." | tee -a $LOGFILE
cvs update -C >> $LOGFILE 2>&1 || failure
else
cd .. || failure
echo "Retrieving MinGW build script (this may take a while)..." | tee -a $LOGFILE
cvs -z3 -d:pserver:anonymous@mingw.cvs.sourceforge.net:/cvsroot/mingw checkout -P xscripts >> $LOGFILE 2>&1 || failure
fi
echo "Preparing MinGW build script..." | tee -a $LOGFILE
cd $ROOT/3rdparty/mingw/xscripts || failure
# note: svn has no force/overwrite switch. the file might not be updated when patched
patch x86-mingw32-build.sh.conf < $ROOT/patches/x86-mingw32-build.sh.conf.patch >> $LOGFILE || failure
chmod +x x86-mingw32-build.sh >> $LOGFILE || failure
store_build_state $BS_PREPARE_MINGW
return 0
}
prepare_sdl()
{
echo "Preparing SDL..." | tee -a $LOGFILE
mkdir -p $ROOT/3rdparty/sdl >> $LOGFILE || failure
mkdir -p $ROOT/build/sdl >> $LOGFILE || failure
cd $ROOT/3rdparty/sdl || failure
if [ -d .svn ]; then
echo "Updating SDL..." | tee -a $LOGFIL
# make sure local changes (patches) are reverted, hence also updated
svn revert -R . >> $LOGFILE 2>&1 || failure
svn update >> $LOGFILE 2>&1 || failure
else
echo "Retrieving SDL (this may take a while)..." | tee -a $LOGFILE
svn checkout http://svn.libsdl.org/branches/SDL-1.2 . >> $LOGFILE 2>&1 || failure
fi
return 0
}
prepare_freetype()
{
echo "Preparing Freetype2..." | tee -a $LOGFILE
mkdir -p $ROOT/build/freetype2 >> $LOGFILE || failure
echo "Retrieving Freetype2 (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty || failure
wget http://mesh.dl.sourceforge.net/sourceforge/freetype/freetype-2.3.5.tar.bz2 >> $LOGFILE 2>&1 || failure
tar -xjf freetype-2.3.5.tar.bz2 >> $LOGFILE 2>&1 || failure
rm freetype-2.3.5.tar.bz2 >> $LOGFILE 2>&1 || failure
# substitute old source tree
rm -rf freetype2 >> $LOGFILE 2>&1 || failure
mv freetype-2.3.5 freetype2 >> $LOGFILE 2>&1 || failure
return 0
}
prepare_libxml()
{
echo "Preparing libxml2..." | tee -a $LOGFILE
mkdir -p $ROOT/build/libxml2 >> $LOGFILE || failure
echo "Retrieving libxml2 (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty || failure
rm -f libxml2-sources-2.6.32.tar.gz >> $LOGFILE 2>&1 || failure
wget --passive-ftp ftp://xmlsoft.org/libxml2/libxml2-sources-2.6.32.tar.gz >> $LOGFILE 2>&1 || failure
tar -xzf libxml2-sources-2.6.32.tar.gz >> $LOGFILE 2>&1 || failure
rm libxml2-sources-2.6.32.tar.gz >> $LOGFILE 2>&1 || failure
# substitute old source tree
rm -rf libxml2 >> $LOGFILE 2>&1 || failure
mv libxml2-2.6.32 libxml2 >> $LOGFILE 2>&1 || failure
return 0
}
prepare_oglft()
{
echo "Preparing OGLFT..." | tee -a $LOGFILE
mkdir -p $ROOT/3rdparty/oglft >> $LOGFILE || failure
mkdir -p $ROOT/build/oglft >> $LOGFILE || failure
cd $ROOT/3rdparty/oglft || failure
if [ -d .svn ]; then
echo "Updating OGLFT..." | tee -a $LOGFILE
# make sure local changes (patches) are reverted, hence also updated
svn revert -R . >> $LOGFILE 2>&1 || failure
svn update >> $LOGFILE 2>&1 || failure
else
echo "Retrieving OGLFT (this may take a while)..." | tee -a $LOGFILE
svn checkout http://oglft.svn.sourceforge.net/svnroot/oglft/trunk . >> $LOGFILE 2>&1 || failure
fi
}
prepare_boinc()
{
echo "Preparing BOINC..." | tee -a $LOGFILE
mkdir -p $ROOT/3rdparty/boinc >> $LOGFILE || failure
mkdir -p $ROOT/build/boinc >> $LOGFILE || failure
cd $ROOT/3rdparty/boinc || failure
if [ -d .svn ]; then
echo "Updating BOINC..." | tee -a $LOGFILE
# make sure local changes (patches) are reverted, hence also updated
svn revert -R . >> $LOGFILE 2>&1 || failure
svn update >> $LOGFILE 2>&1 || failure
else
echo "Retrieving BOINC (this may take a while)..." | tee -a $LOGFILE
svn checkout http://boinc.berkeley.edu/svn/branches/server_stable . >> $LOGFILE 2>&1 || failure
fi
return 0
}
build_sdl()
{
if [ $BUILDSTATE -ge $BS_BUILD_SDL ]; then
return 0
fi
prepare_sdl || failure
echo "Building SDL (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty/sdl || failure
chmod +x autogen.sh >> $LOGFILE 2>&1 || failure
./autogen.sh >> $LOGFILE 2>&1 || failure
chmod +x configure >> $LOGFILE 2>&1 || failure
cd $ROOT/build/sdl || failure
if [ "$1" == "$TARGET_MAC_INTEL" -o "$1" == "$TARGET_MAC_PPC" ]; then
$ROOT/3rdparty/sdl/configure --prefix=$ROOT/install --enable-shared=no --enable-static=yes --enable-screensaver=yes --enable-video-x11=no >> $LOGFILE 2>&1 || failure
else
$ROOT/3rdparty/sdl/configure --prefix=$ROOT/install --enable-shared=no --enable-static=yes --enable-screensaver=yes >> $LOGFILE 2>&1 || failure
fi
make >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed SDL!" | tee -a $LOGFILE
store_build_state $BS_BUILD_SDL || failure
return 0
}
build_freetype()
{
if [ $BUILDSTATE -ge $BS_BUILD_FREETYPE ]; then
return 0
fi
prepare_freetype || failure
echo "Building Freetype2 (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty/freetype2 || failure
chmod +x autogen.sh >> $LOGFILE 2>&1 || failure
./autogen.sh >> $LOGFILE 2>&1 || failure
chmod +x configure >> $LOGFILE 2>&1 || failure
cd $ROOT/build/freetype2 || failure
# note: freetype (or sdl?) probably doesn't need *no* configure when static -> ansi build, see readme!
$ROOT/3rdparty/freetype2/configure --prefix=$ROOT/install --enable-shared=no --enable-static=yes >> $LOGFILE 2>&1 || failure
make >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed Freetype2!" | tee -a $LOGFILE
store_build_state $BS_BUILD_FREETYPE || failure
return 0
}
build_libxml()
{
if [ $BUILDSTATE -ge $BS_BUILD_LIBXML ]; then
return 0
fi
prepare_libxml || failure
echo "Building libxml2 (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty/libxml2 || failure
chmod +x configure >> $LOGFILE 2>&1 || failure
cd $ROOT/build/libxml2 || failure
$ROOT/3rdparty/libxml2/configure --prefix=$ROOT/install --enable-shared=no --enable-static=yes >> $LOGFILE 2>&1 || failure
make >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed libxml2!" | tee -a $LOGFILE
store_build_state $BS_BUILD_LIBXML || failure
return 0
}
build_oglft()
{
if [ $BUILDSTATE -ge $BS_BUILD_OGLFT ]; then
return 0
fi
prepare_oglft || failure
echo "Patching OGLFT..." | tee -a $LOGFILE
cd $ROOT/3rdparty/oglft || failure
# note: svn has no force/overwrite switch. patched files might not be updated
# patch: use fixed settings for freetype, deactivate FindFreetype
FREETYPE2_INCLUDE_DIR="$ROOT/install/include"
FREETYPE2_LIBRARIES="$ROOT/install/lib/libfreetype.a"
patch CMakeLists.txt < $ROOT/patches/CMakeLists.txt.oglft.patch >> $LOGFILE 2>&1 || failure
echo "Building OGLFT..." | tee -a $LOGFILE
cd $ROOT/build/oglft || failure
# TODO: do we wanna create universal binaries on mac? If so, add -DCMAKE_OSX_ARCHITECTURES=ppc;i386
cmake -DFREETYPE2_INCLUDE_DIR="$FREETYPE2_INCLUDE_DIR" -DFREETYPE2_LIBRARIES="$FREETYPE2_LIBRARIES" $ROOT/3rdparty/oglft >> $LOGFILE 2>&1 || failure
make >> $LOGFILE 2>&1 || failure
mkdir -p $ROOT/install/include/oglft >> $LOGFILE 2>&1 || failure
cp OGLFT.h $ROOT/install/include/oglft >> $LOGFILE 2>&1 || failure
cp liboglft/liboglft.a $ROOT/install/lib >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed OGLFT!" | tee -a $LOGFILE
store_build_state $BS_BUILD_OGLFT || failure
return 0
}
build_boinc()
{
if [ $BUILDSTATE -ge $BS_BUILD_BOINC ]; then
return 0
fi
prepare_boinc || failure
echo "Configuring BOINC..." | tee -a $LOGFILE
cd $ROOT/3rdparty/boinc || failure
chmod +x _autosetup >> $LOGFILE 2>&1 || failure
./_autosetup >> $LOGFILE 2>&1 || failure
chmod +x configure >> $LOGFILE 2>&1 || failure
cd $ROOT/build/boinc || failure
if [ "$1" == "$TARGET_MAC_INTEL" -o "$1" == "$TARGET_MAC_PPC" ]; then
export CPPFLAGS=-I/sw/include
$ROOT/3rdparty/boinc/configure --prefix=$ROOT/install --enable-shared=no --enable-static=yes --disable-server --disable-client --with-apple-opengl-framework --enable-install-headers --enable-libraries --disable-manager --disable-fcgi >> $LOGFILE 2>&1 || failure
elif [ -d "/usr/local/ssl" ]; then
echo "Using local SSL library..." | tee -a $LOGFILE
$ROOT/3rdparty/boinc/configure --prefix=$ROOT/install --enable-shared=no --enable-static=yes --disable-server --disable-client --enable-install-headers --enable-libraries --disable-manager --disable-fcgi CPPFLAGS=-I/usr/local/ssl/include LDFLAGS=-L/usr/local/ssl/lib >> $LOGFILE 2>&1 || failure
else
$ROOT/3rdparty/boinc/configure --prefix=$ROOT/install --enable-shared=no --enable-static=yes --disable-server --disable-client --enable-install-headers --enable-libraries --disable-manager --disable-fcgi >> $LOGFILE 2>&1 || failure
fi
echo "Building BOINC (this may take a while)..." | tee -a $LOGFILE
make >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed BOINC!" | tee -a $LOGFILE
store_build_state $BS_BUILD_BOINC || failure
return 0
}
build_mingw()
{
if [ $BUILDSTATE -ge $BS_BUILD_MINGW ]; then
return 0
fi
TARGET_HOST=i586-pc-mingw32
echo "Building MinGW (this will take quite a while)..." | tee -a $LOGFILE
# note: the script's current config for unattended setup expects it to be run from three levels below root!
cd $ROOT/3rdparty/mingw/xscripts || failure
./x86-mingw32-build.sh --unattended $TARGET_HOST >> $LOGFILE 2>&1 || failure
store_build_state $BS_BUILD_MINGW
return 0
}
set_mingw()
{
# general config
PREFIX=$ROOT/install
TARGET_HOST=i586-pc-mingw32
BUILD_HOST=i386-linux
PATH_MINGW="$PREFIX/bin:$PREFIX/$TARGET_HOST/bin:$PATH"
PATH="$PATH_MINGW"
export PATH
}
build_sdl_mingw()
{
if [ $BUILDSTATE -ge $BS_BUILD_SDL_MINGW ]; then
return 0
fi
prepare_sdl || failure
echo "Patching SDL..." | tee -a $LOGFILE
cd $ROOT/3rdparty/sdl/src/video/wincommon || failure
# patch: amend window class name (required by BOINC v6 screensaver!)
patch < $ROOT/patches/SDL_sysevents.c.patch >> $LOGFILE 2>&1 || failure
echo "Building SDL (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty/sdl || failure
chmod +x autogen.sh >> $LOGFILE 2>&1 || failure
./autogen.sh >> $LOGFILE 2>&1 || failure
chmod +x configure >> $LOGFILE 2>&1 || failure
if [ -f "$PREFIX/$TARGET_HOST/bin/$TARGET_HOST-sdl-config" ]; then
SDL_CONFIG="$PREFIX/$TARGET_HOST/bin/$TARGET_HOST-sdl-config"
export SDL_CONFIG
echo "Cross-compile SDL_CONFIG: $SDL_CONFIG" >> $LOGFILE
fi
cd $ROOT/build/sdl || failure
$ROOT/3rdparty/sdl/configure --host=$TARGET_HOST --build=$BUILD_HOST --prefix=$PREFIX --enable-shared=no --enable-static=yes --enable-screensaver=yes >> $LOGFILE 2>&1 || failure
make >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed SDL!" | tee -a $LOGFILE
store_build_state $BS_BUILD_SDL_MINGW || failure
return 0
}
build_freetype_mingw()
{
if [ $BUILDSTATE -ge $BS_BUILD_FREETYPE_MINGW ]; then
return 0
fi
prepare_freetype || failure
echo "Patching Freetype2..." | tee -a $LOGFILE
cd $ROOT/3rdparty/freetype2/builds || failure
# patch: deactivating invocation of apinames (would run win32 binary on linux host)
patch < $ROOT/patches/freetype2.exports.mk.patch >> $LOGFILE 2>&1 || failure
echo "Building Freetype2 (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty/freetype2 || failure
chmod +x autogen.sh >> $LOGFILE 2>&1 || failure
./autogen.sh >> $LOGFILE 2>&1 || failure
chmod +x configure >> $LOGFILE 2>&1 || failure
if [ -f "$PREFIX/$TARGET_HOST/bin/$TARGET_HOST-freetype-config" ]; then
FT_CONFIG="$PREFIX/$TARGET_HOST/bin/$TARGET_HOST-freetype-config"
export FT_CONFIG
echo "Cross-compile FT_CONFIG: $FT_CONFIG" >> $LOGFILE
fi
cd $ROOT/build/freetype2 || failure
# note: freetype (or sdl?) probably doesn't need *no* configure when static -> ansi build, see readme!
$ROOT/3rdparty/freetype2/configure --host=$TARGET_HOST --build=$BUILD_HOST --prefix=$PREFIX --enable-shared=no --enable-static=yes >> $LOGFILE 2>&1 || failure
make >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed Freetype2!" | tee -a $LOGFILE
store_build_state $BS_BUILD_FREETYPE_MINGW || failure
return 0
}
build_libxml_mingw()
{
if [ $BUILDSTATE -ge $BS_BUILD_LIBXML_MINGW ]; then
return 0
fi
prepare_libxml || failure
echo "Building libxml2 (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty/libxml2 || failure
chmod +x configure >> $LOGFILE 2>&1 || failure
if [ -f "$PREFIX/$TARGET_HOST/bin/$TARGET_HOST-xml2-config" ]; then
LIBXML2_CONFIG="$PREFIX/$TARGET_HOST/bin/$TARGET_HOST-xml2-config"
export LIBXML2_CONFIG
echo "Cross-compile LIBXML2_CONFIG: $LIBXML2_CONFIG" >> $LOGFILE
fi
cd $ROOT/build/libxml2 || failure
$ROOT/3rdparty/libxml2/configure --host=$TARGET_HOST --build=$BUILD_HOST --prefix=$PREFIX --enable-shared=no --enable-static=yes >> $LOGFILE 2>&1 || failure
make >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed libxml2!" | tee -a $LOGFILE
store_build_state $BS_BUILD_LIBXML_MINGW || failure
return 0
}
build_oglft_mingw()
{
if [ $BUILDSTATE -ge $BS_BUILD_OGLFT_MINGW ]; then
return 0
fi
prepare_oglft || failure
echo "Patching OGLFT..." | tee -a $LOGFILE
cd $ROOT/3rdparty/oglft || failure
# note: svn has no force/overwrite switch. patched files might not be updated
# patch: use fixed settings for freetype, deactivate FindFreetype
FREETYPE2_INCLUDE_DIR="$ROOT/install/include"
FREETYPE2_LIBRARIES="$ROOT/install/lib/libfreetype.a"
patch CMakeLists.txt < $ROOT/patches/CMakeLists.txt.oglft.patch >> $LOGFILE 2>&1 || failure
cp $ROOT/patches/toolchain-linux-mingw.oglft.cmake $ROOT/build/oglft >> $LOGFILE 2>&1 || failure
export OGLFT_INSTALL=$ROOT/install
echo "Building OGLFT..." | tee -a $LOGFILE
cd $ROOT/build/oglft || failure
cmake -DCMAKE_TOOLCHAIN_FILE="toolchain-linux-mingw.oglft.cmake" -DFREETYPE2_INCLUDE_DIR="$FREETYPE2_INCLUDE_DIR" -DFREETYPE2_LIBRARIES="$FREETYPE2_LIBRARIES" $ROOT/3rdparty/oglft >> $LOGFILE 2>&1 || failure
make >> $LOGFILE 2>&1 || failure
mkdir -p $ROOT/install/include/oglft >> $LOGFILE 2>&1 || failure
cp OGLFT.h $ROOT/install/include/oglft >> $LOGFILE 2>&1 || failure
cp liboglft/liboglft.a $ROOT/install/lib >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed OGLFT!" | tee -a $LOGFILE
store_build_state $BS_BUILD_OGLFT_MINGW || failure
return 0
}
build_boinc_mingw()
{
if [ $BUILDSTATE -ge $BS_BUILD_BOINC_MINGW ]; then
return 0
fi
prepare_boinc || failure
echo "Patching BOINC..." | tee -a $LOGFILE
cd $ROOT/3rdparty/boinc/lib || failure
# patch: fix a couple of BOINC vs. MinGW issues
patch boinc_win.h < $ROOT/patches/boinc.boinc_win.h.minggw.patch >> $LOGFILE 2>&1 || failure
patch filesys.cpp < $ROOT/patches/boinc.filesys.cpp.mingw.patch >> $LOGFILE 2>&1 || failure
echo "Building BOINC (this may take a while)..." | tee -a $LOGFILE
cd $ROOT/3rdparty/boinc || failure
chmod +x _autosetup >> $LOGFILE 2>&1 || failure
./_autosetup >> $LOGFILE 2>&1 || failure
chmod +x configure >> $LOGFILE 2>&1 || failure
cd $ROOT/build/boinc || failure
# note: configure is still required but we don't use the generated Makefile
$ROOT/3rdparty/boinc/configure --host=$TARGET_HOST --build=$BUILD_HOST --prefix=$ROOT/install --includedir=$ROOT/install/include --oldincludedir=$ROOT/install/include --enable-shared=no --enable-static=yes --disable-server --disable-client --enable-install-headers --enable-libraries --disable-manager --disable-fcgi >> $LOGFILE 2>&1 || failure
cd $ROOT/build/boinc/api || failure
cp $ROOT/3rdparty/boinc/api/Makefile.mingw . >> $LOGFILE 2>&1 || failure
# patch: add graphics2 and customize build path (see below)
patch Makefile.mingw < $ROOT/patches/boinc.Makefile.mingw.patch >> $LOGFILE 2>&1 || failure
export BOINC_SRC=$ROOT/3rdparty/boinc || failure
cd $ROOT/build/boinc || failure
# required for out-of-tree build
cp config.h $ROOT/3rdparty/boinc >> $LOGFILE 2>&1 || failure
make -f api/Makefile.mingw >> $LOGFILE 2>&1 || failure
cp $ROOT/build/boinc/libboinc.a $ROOT/install/lib >> $LOGFILE 2>&1 || failure
mkdir -p $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/build/boinc/config.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/build/boinc/version.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/api/boinc_api.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/api/graphics2.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/app_ipc.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/boinc_win.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/common_defs.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/diagnostics.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/diagnostics_win.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/filesys.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/hostinfo.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/proxy_info.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/prefs.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/miofile.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/mfile.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/parse.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
cp $ROOT/3rdparty/boinc/lib/util.h $ROOT/install/include/boinc >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed BOINC!" | tee -a $LOGFILE
store_build_state $BS_BUILD_BOINC_MINGW || failure
return 0
}
build_starsphere()
{
# make sure ORC is always compiled for host platform (it's exexuted during starsphere build!)
echo "Preparing Starsphere..." | tee -a $LOGFILE
mkdir -p $ROOT/build/orc >> $LOGFILE || failure
mkdir -p $ROOT/build/framework >> $LOGFILE || failure
mkdir -p $ROOT/build/starsphere >> $LOGFILE || failure
export PATH=$PATH_ORG
echo "Building Starsphere [ORC]..." | tee -a $LOGFILE
export ORC_SRC=$ROOT/src/orc || failure
export ORC_INSTALL=$ROOT/install || failure
cd $ROOT/build/orc || failure
cp $ROOT/src/orc/Makefile . >> $LOGFILE 2>&1 || failure
make $2 >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed Starsphere [ORC]!" | tee -a $LOGFILE
# set main include directory
if [ "$1" == "$TARGET_WIN32" ]; then
export PATH=$PATH_MINGW
else
export PATH=$PATH_ORG
fi
echo "Building Starsphere [Framework]..." | tee -a $LOGFILE
export FRAMEWORK_SRC=$ROOT/src/framework || failure
export FRAMEWORK_INSTALL=$ROOT/install || failure
cd $ROOT/build/framework || failure
if [ "$1" == "$TARGET_WIN32" ]; then
cp -f $ROOT/src/framework/Makefile.mingw Makefile >> $LOGFILE 2>&1 || failure
else
cp -f $ROOT/src/framework/Makefile . >> $LOGFILE 2>&1 || failure
fi
make $2 >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed Starsphere [Framework]!" | tee -a $LOGFILE
echo "Building Starsphere [Application]..." | tee -a $LOGFILE
export STARSPHERE_SRC=$ROOT/src/starsphere || failure
export STARSPHERE_INSTALL=$ROOT/install || failure
cd $ROOT/build/starsphere || failure
cp $ROOT/src/starsphere/*.res . >> $LOGFILE 2>&1 || failure
if [ "$1" == "$TARGET_MAC_INTEL" ] || [ "$1" == "$TARGET_MAC_PPC" ]; then
cp -f $ROOT/src/starsphere/Makefile.macos Makefile >> $LOGFILE 2>&1 || failure
elif [ "$1" == "$TARGET_WIN32" ]; then
cp -f $ROOT/src/starsphere/Makefile.mingw Makefile >> $LOGFILE 2>&1 || failure
else
cp -f $ROOT/src/starsphere/Makefile . >> $LOGFILE 2>&1 || failure
fi
make $2 >> $LOGFILE 2>&1 || failure
make install >> $LOGFILE 2>&1 || failure
echo "Successfully built and installed Starsphere [Application]!" | tee -a $LOGFILE
return 0
}
build_linux()
{
echo "Important for an official build: let CC and CXX point to gcc/g++ 4.0.3!"
build_sdl || failure
build_freetype || failure
build_libxml || failure
build_oglft || failure
build_boinc || failure
build_starsphere $1 $2 || failure
return 0
}
build_mac()
{
build_sdl $1 || failure
build_freetype || failure
build_libxml || failure
build_oglft || failure
build_boinc $1 || failure
build_starsphere $1 || failure
return 0
}
build_win32()
{
export CPPFLAGS="-D_WIN32_WINDOWS=0x0410 $CPPFLAGS"
export CFLAGS="-mms-bitfields $CFLAGS"
export CXXFLAGS="-mms-bitfields $CXXFLAGS"
prepare_mingw || failure
build_mingw || failure
set_mingw || failure
build_sdl_mingw || failure
build_freetype_mingw || failure
build_libxml_mingw || failure
build_oglft_mingw || failure
build_boinc_mingw || failure
build_starsphere $TARGET_WIN32 || failure
return 0
}
print_usage()
{
cd $ROOT
echo "*************************"
echo "Usage: `basename $0` <target>"
echo
echo "Available targets:"
echo " --linux"
echo " --mac-intel"
echo " --mac-ppc"
echo " --win32"
echo " --doc"
echo "*************************"
echo "Wrong usage. Stopping!" >> $LOGFILE
return 0
}
### main control ##########################################################
echo "************************************" | tee -a $LOGFILE
echo "Starting new build!" | tee -a $LOGFILE
echo "`date`" | tee -a $LOGFILE
echo "************************************" | tee -a $LOGFILE
# crude command line parsing :-)
if [ $# -ne 1 ]; then
print_usage
exit 1
fi
case "$1" in
"--linux")
TARGET=$TARGET_LINUX
check_last_build "$1" || failure
echo "Building linux version:" | tee -a $LOGFILE
check_build_state || failure
;;
"--mac-intel")
TARGET=$TARGET_MAC_INTEL
check_last_build "$1" || failure
echo "Building mac (Intel) version:" | tee -a $LOGFILE
check_build_state || failure
;;
"--mac-ppc")
TARGET=$TARGET_MAC_PPC
check_last_build "$1" || failure
echo "Building mac (PPC) version:" | tee -a $LOGFILE
check_build_state || failure
;;
"--win32")
TARGET=$TARGET_WIN32
check_last_build "$1" || failure
echo "Building win32 version:" | tee -a $LOGFILE
check_build_state || failure
;;
"--doc")
TARGET=$TARGET_DOC
echo "Building documentation..." | tee -a $LOGFILE
;;
"--distclean")
distclean || failure
exit 0
;;
"--starsphere")
# "hidden" bonus option :-)
TARGET=$TARGET_LINUX
build_starsphere $TARGET "debug" || failure
exit 0
;;
*)
print_usage
exit 1
;;
esac
# here we go...
case $TARGET in
$TARGET_LINUX)
check_prerequisites || failure
prepare_tree || failure
build_linux || failure
;;
$TARGET_MAC_INTEL)
if [ -d /Developer/SDKs/MacOSX10.4u.sdk ]; then
echo "Preparing Mac OS X 10.4 SDK build environment..." | tee -a $LOGFILE
# use 10.4 (Tiger) SDK because of BOINC/10.5 incompatibility (http://boinc.berkeley.edu/doxygen/api/html/QBacktrace_8h.html)
export LDFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk -Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk -arch i386 $LDFLAGS"
export CPPFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 $CPPFLAGS"
export CFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 $CFLAGS"
export CXXFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 $CXXFLAGS"
export SDKROOT="/Developer/SDKs/MacOSX10.4u.sdk"
export MACOSX_DEPLOYMENT_TARGET=10.4
else
echo "Mac OS X 10.4 SDK required but missing!" | tee -a $LOGFILE
failure
fi
check_prerequisites || failure
prepare_tree || failure
build_mac $TARGET_MAC_INTEL || failure
;;
$TARGET_MAC_PPC)
export CFLAGS=-mcpu=G3 || failure
export CXXFLAGS=-mcpu=G3 || failure
check_prerequisites || failure
prepare_tree || failure
build_mac $TARGET_MAC_PPC || failure
;;
$TARGET_WIN32)
check_prerequisites || failure
prepare_tree || failure
build_win32 || failure
;;
$TARGET_DOC)
doxygen Doxyfile >> $LOGFILE 2>&1 || failure
cp -f $ROOT/doc/default/*.png $ROOT/doc/html >> $LOGFILE 2>&1 || failure
cp -f $ROOT/doc/default/*.gif $ROOT/doc/html >> $LOGFILE 2>&1 || failure
;;
*)
# should be unreachable
print_usage
exit 1
;;
esac
echo "************************************" | tee -a $LOGFILE
echo "Build finished successfully!" | tee -a $LOGFILE
echo "`date`" | tee -a $LOGFILE
echo "************************************" | tee -a $LOGFILE
exit 0