Skip to content
Snippets Groups Projects
Commit 426478cf authored by ballen4705's avatar ballen4705
Browse files

Added example disk 

git-svn-id: https://smartmontools.svn.sourceforge.net/svnroot/smartmontools/trunk@388 4ea69e1a-61f1-4043-bf83-b5c94c648137
parent d6c56c62
No related branches found
No related tags found
No related merge requests found
Show whitespace changes
Inline Side-by-side
www/examples/MAXTOR-6.txt 0 → 100644
+ 156
− 0
View file @ 426478cf
# /usr/sbin/smartctl -a -m /dev/hda
smartctl version 5.0-49 Copyright (C) 2002 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 4R080J0
Serial Number: R20BZ3LE
Firmware Version: RAMB1TU0
ATA Version is: 7
ATA Standard is: Unrecognized. Minor revision code: 0x1e
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Off-line data collection status: (0x82) Offline data collection activity
completed without error.
Self-test execution status: ( 33) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete off-line
data collection: ( 241) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Automatic timer ON/OFF support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 41) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 252 252 063 Pre-fail - 1621
4 Start_Stop_Count 0x0032 253 253 000 Old_age - 18
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age - 0
8 Seek_Time_Performance 0x0027 252 244 187 Pre-fail - 41642
9 Power_On_Hours 0x0032 253 253 000 Old_age - 27 h + 13 m
10 Spin_Retry_Count 0x002b 252 252 157 Pre-fail - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail - 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age - 24
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age - 29
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age - 31004
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age - 0
201 Unknown_Attribute 0x000a 253 252 000 Old_age - 3
202 Unknown_Attribute 0x000a 253 252 000 Old_age - 0
203 Unknown_Attribute 0x000b 253 252 180 Pre-fail - 2
204 Unknown_Attribute 0x000a 253 252 000 Old_age - 0
205 Unknown_Attribute 0x000a 253 252 000 Old_age - 0
207 Unknown_Attribute 0x002a 252 252 000 Old_age - 0
208 Unknown_Attribute 0x002a 252 252 000 Old_age - 0
209 Unknown_Attribute 0x0024 079 063 000 Old_age - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age - 0
SMART Error Log Version: 1
ATA Error Count: 5
DCR = Device Control Register
FR = Features Register
SC = Sector Count Register
SN = Sector Number Register
CL = Cylinder Low Register
CH = Cylinder High Register
D/H = Device/Head Register
CR = Content written to Command Register
ER = Error register
STA = Status register
Timestamp is seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.
Error 5 occurred at disk power-on lifetime: 4 hours
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER:04 SC:00 SN:00 CL:f4 CH:2c D/H:00 ST:01
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
0e d4 00 82 4f c2 f0 b0 8907.296
08 d4 00 82 4f c2 f0 b0 6260.832
08 d1 01 01 4f c2 f0 b0 6260.800
08 d0 01 00 4f c2 f0 b0 6260.768
08 da 00 00 4f c2 10 b0 6260.736
Error 4 occurred at disk power-on lifetime: 1 hours
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER:04 SC:00 SN:00 CL:f4 CH:2c D/H:00 ST:01
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
0e d4 00 82 4f c2 f0 b0 1944.192
08 d4 00 82 4f c2 f0 b0 1824.240
08 d1 01 01 4f c2 f0 b0 1824.224
08 d0 01 00 4f c2 f0 b0 1824.160
08 00 08 3f 00 00 f0 ca 1810.400
Error 3 occurred at disk power-on lifetime: 1 hours
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER:04 SC:00 SN:00 CL:f4 CH:2c D/H:00 ST:01
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
0e d4 00 82 4f c2 f0 b0 1456.432
08 d4 00 82 4f c2 f0 b0 1379.456
08 d1 01 01 4f c2 f0 b0 1379.440
08 d0 01 00 4f c2 f0 b0 1379.376
08 00 08 f7 01 54 f0 ca 1378.544
Error 2 occurred at disk power-on lifetime: 0 hours
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER:04 SC:00 SN:00 CL:f4 CH:2c D/H:00 ST:51
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
08 d4 00 82 4f c2 f0 b0 908.320
08 d1 01 01 4f c2 f0 b0 908.320
08 d0 01 00 4f c2 f0 b0 908.272
08 d4 00 7f 4f c2 f0 b0 905.696
08 d1 01 01 4f c2 f0 b0 905.664
Error 1 occurred at disk power-on lifetime: 0 hours
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER:04 SC:50 SN:40 CL:97 CH:03 D/H:10 ST:51
Sequence of commands leading to the command that caused the error were:
DCR FR SC SN CL CH D/H CR Timestamp
00 fe 00 00 00 00 10 ef 137.184
00 3d 00 00 00 00 10 c3 137.136
00 e4 00 00 00 00 10 c3 137.088
00 3d 00 00 00 00 10 c3 137.088
00 00 00 00 5e 20 10 70 137.040
SMART Self-test log, version number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended captive Interrupted (host reset) 10% 4
# 2 Short off-line Completed 00% 2
# 3 Short captive Completed 00% 2
# 4 Extended captive Interrupted (host reset) 40% 1
# 5 Extended captive Interrupted (host reset) 70% 1
# 6 Extended captive Interrupted (host reset) 40% 0
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment

AEI Privacy Policy Imprint